Reviews Gold Fan Hub

Airgoo PWM ARGB Fan Hub, 2022 New Upgrade 8 Fan Ports with pwm control sync with motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Power

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

ARCTIC Case Fan Hub - 10-fold PWM Fan Distributor with SATA Power - Black

  • CABLE MANAGEMENT: Case Fan Hub can be placed in housing, it's connected to motherboard with one cable, you can do without many additional cables and....
  • SYNCHRONOUS FAN CONTROL: Your set PWM signal is passed on synchronously to all fans connected to the Case Fan Hub, the RPM of the first fan slot are....
  • EXPAND YOUR VENTILATION: Even if you don't have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots.
  • EXTERNAL POWER SUPPLY: The fans are powered directly from your power supply via Sata Power, there is no voltage loss at the fan speed and smooth,....
  • TECHNICAL DETAILS: Output: 10 x 4-pin PWM Socket, Output Current: up to 1 A per Port, Input: SATA Power + 4-pin Fan Header, Input Current: up to 4.5....
Check Stock

Chassis Fan Hub SATA 1 to 8 Way12V 3 PIN Cooling Fan Splitter Controller Hub 3 Pin PWM for PC Desktop Computer Motherboard 12V 3-Pin

  • ✪ SATA Cooling Fan Splitter Suit for 12V 3Pin fan (8 channels).Using SATA interface.Support the fan operation at the same time, solve the lack of....
  • ✪ Suit for 12V 3Pin fan (8 channels).Using SATA interface.Support the fan operation at the same time, solve the lack of motherboard interface, and....
  • ✪ Built-in double-sided adhesive: This compact HUB easily fits inside your pc case. It can be used to fix the hub in the chassis..
  • ✪ 8 way without speed measurement and PWM function, you can manually adjust the gear position, start the fan at full speed (LOW) or low speed (LOW),....
  • ✪ EASY INSTALLATION:It is very easy to setup. Connect your RGB items to the hub, connect the included cable to any pin on the hub then connect the....
Check Stock

MEIRIYFA 3 Pin 4 Pin Fan Adapter PWM PC Chassis Cooling Fan Hub 8 Way Splitter 12V Speed Controller with 6 Pin Power Port

  • [Expand Fan Interfaces] – Excellent 1 to 8 splitter 8 way 4-pin and 3-pin PWM fan power supply extension hub, it provide a better power supply solution for PC computer case internal motherboard cooling fans..
  • [Function] – Through this hub, the governor can supply power to up to 8 fans, and the rotating potentiometer can adjust the speed of 8 PWM fans at the same time..
  • [Widely Compatible] – For both 4-Pin and 3-Pin fans. If the fan does not support PWM speed regulation function, the speed regulation function is invalid. The total current connected to the fan shall not exceed the maximum current value of 17A to avoid damage to the governor..
  • [High Performance] – The high-performance fully black circuit board is adopted, the hub is small in size and convenient to use, the material is strong and the resistance is small, which does not affect the fan performance..
  • [Glue Fixation] – The thickened 3M glue is used to fix it, which has strong adhesion, easily fits inside your pc case and can firmly fix the fan hub inside the chassis..
Check Stock

PWM Fan Hub Cable 2-Pack 4Pin Computer CPU Case Fan Splitter 5 Port 1 to 5 Fans for 3Pin Computer PC Case Fan 4Pin PWM Fan ITX Mining Rig Frame Case

  • ❤4 PIN INTERFACE: 4Pin motherboad power supply PWM cpu Fan splitter cable can extended 1pcs CPU fan port to 5pcs fan ports to solve the port shortage of computer pc case fans..
  • ❤ FAN EXTENSION CABLE: 3Pin 4Pin fan extension splitter cable can compatible with all 12V CPU fans and computer pc case fans extension..
  • ❤ BLACK NYLON BRAIDED: 12.99 inch 33 cm fan cable hub with black braided sleeve and tinned copper wire,lower resistance,stable and durable quality..
  • ❤STRONG DOUBLE SIDED ADHESIVE : Computer fan hub Comes with self-stick for easy installation..
Check Stock

Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller

  • Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous....
  • In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive....
  • For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no....
  • There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the....
  • RED is expected to be a pass through for the CPU fan. So, the hub has a power source fed from the computer power supply, then the speed is regulated....
Check Stock

Minka-Aire F843-WH, Wave, 52\ Ceiling Fan, White

  • Works with Alexa for voice control (hub required, Alexa device and hub sold separately)..
  • Requires Bond hub (sold separately) to work with Alexa..
  • Designed with a white body, this indoor ceiling fan was crafted with Three White Blades.
  • Control included: RCS213 - Three-speed hand-held remote with full-range light dimming. Non-reversing (manual reverse switch on motor).
  • Dimensions: Measures 13.5'' from the ceiling to the bottom of the fan with the included 3.5" downrod. This Contemporary Ceiling Fan has a blade sweep diameter of 52'' with 48° Blade Pitch.
  • Includes 3.5" and 6" Downrods and Angled Ceiling Adapter. Can be mounted up to 21° with included adapter. Use A245-WH (sold separately) for ceilings angled 21° to 45°.
  • Minka Aire Fan, Not Light Kit Compatible.
Check Stock

ID-COOLING HA-02 Fan Hub for Computer Internal Fans, 8 PWM Ports+8 ARGB Ports, ARGB Motherboard Sync, PWM Functional Fan Adapter

  • 【1 to 8 Fan Hub】The fan hub splitter can support up to 8 fans, including a total of 8 4-pin PWM ports and 8 ARGB ports for ARGB fans and ARGB LED strips. The fan hub offers greater flexibility between motherboard and CPU cooling fans..
  • 【PWM Functional Fan Adapter】Fan speed can be adjusted at the same time, only the speed of "Fan 1" can be identified by the system. The speed control function is unavailable for 3 pin fans, the attached 3 pin fans will run at maximum RPM..
  • 【Widely Compatible】 The 1 to 8 fan adapter provides power supply and connectors for PC computer case internal fans..
  • 【Easy Installation】 Double-sided adhesive on the back of the PCB board, which can be easily affixed to a flat place..
  • 【Clean & Tidy】Black sleeved nylon braided cable, more durable, and make the inside of the PC case looks more clean & tidy..
Check Stock

upHere 7-Port 4PIN SATA PWM 5V 3PIN ADDRESSABLE RGB Fan Hub/Splitter for 4-Pin & 3-Pin Case Fans in Black-P7PRGB

  • 01.upHere ARGB PWM Fan Hub - Supports up to 7 Fans （3PIN/PWM 4PIN/5V 3PIN ARGB）), Occupying only One 4-pin M/B FAN Header (System Fan or CPU....
  • 02.upHere P7P Fan hub provides individually addressable RGB lighting with software control for unique lighting effects and colors.5V ARGB Header....
  • 03.Capable of connecting to 7 PC fans simultaneously for cooling the computer system. Each port has its own PWM function and the fan speed can be....
  • 04.Powered by system PSU Sata connection to ensure 12V stable power for up to 7 fans..
  • 05.Easy and Quick Installation with a Compact Design, upHere P7P Fan hub allows you to easily attach on the back of the PC case using pre-installed....
Check Stock

EZDIY-FAB PWM Fan Hub Controller/Splitter for 4-Pin & 3-Pin PC Cooling Fans, SATA Power, Only Use One MB Header

  • Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header.Note: Max current limit is 3A in total, check the spec of fan first..
  • In the hub interfaces, the White interface of FAN1 is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal..
  • There is EVA double-sided adhesive in the package, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis..
  • Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control..
  • If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED..
Check Stock