Reviews Gold Capacitor

DC Audio LVL3-M2 12' Level 3 900W/1800W Dual-2-Ohm Car Audio Subwoofer/Sub

  • output power is 15W stereo (24V 8ohm)/ 10W stereo (12V 8 ohm), if connect 4 ohm or 2 ohm speaker, the power will be automatically limited to 15W..
  • Artificial Material: this New-designed stereo amplifier module is made of noble black immersion gold circuit board, PAM8620 chip, imported KEMET speaker capacitor, large-capacity filter capacitor for channels. Besides, we customized black copper terminal blocks and gold-plated audio input terminal blocks for this new amplifier module..
  • High Performance: the class D power amp module is with high efficiency of over 90%, general harmonic distortion noise is less than 0.2%, low quiescent current and noise suppression..
  • Safe Protection: the 2 channel amp board is designed with input reverse connection protection, short circuit protection, over heat protection, overcurrent protection, overvoltage protection, undervoltage protection.
  • Additional Function: it is available to connect external mute function (MUTE: High level mute, factory default low level).
  • available to add an external Shutdown (SD: the chip will be Shutdown at low electricity level, factory defaults high electricity level..
Check Stock

BOSS Audio CAP8 8 FARAD LED Digital Voltage Display Car Audio Power Capacitor and QPower 0 Gauge 3000 Watt Car Amplifier Wiring Installation Kit

  • POWER CAPACITOR: 8 FARAD LED Digital Voltage Display Car Audio Power Capacitor.
  • High-Level Input Surge Voltage: 20 Volts.
  • AUDIBLE WARNING TONE: Audible warning tones for reverse polarity, low battery voltage and voltage overload.
  • DIGITAL DISPLAY: Blue LED digital illuminated display window.
  • SPECIFICATIONS: Equivalent Series Resistance (ESR): 0.0015 Ohms @ 120 Hz @ 25 Degrees C.
  • Capacitance: 8 Farad, 8000000 Microfarad.
  • WIRING KIT: Deluxe High Quality Fuse Holder.
Check Stock

Audio Amplifier Board, DROK 5W+5W Mini Amplifier Board PAM8406 DC 5V Digital Stereo Power Amp 2.0 Dual Channel Class D Amplify Module for Speaker Sound System DIY

  • ...audio amplifier board working voltage is DC 5V, output power is 5W (2Ω 5V)/3W (4Ω 5V) / 1.8W (8Ω 5V). Input method is monaural input..
  • Artificial Material: this New-designed mini power amplifier is made of noble black immersion gold circuit board, imported KEMET speaker capacitor, large-capacity filter capacitor for channels. Besides, we customized black copper terminal blocks and gold-plated audio input terminal blocks for this new amplifier module..
  • High Performance: the digital amplifier module is with high efficiency of over 90%, general harmonic distortion noise is less than 10%, low quiescent current and noise suppression..
  • Safe Protection: the class D dual-channel amp board is designed with input reverse connection protection, short circuit protection, over heat protection.
  • Additional Function: it is available to connect amplifier type to choose different function (MODE: high electricity level is Type D, low electricity level is Type AB. Factory defaults high electricity level).
  • available to add an external Shutdown (SD: the chip....
Check Stock

BOSS CAP18 18 Farad Digital Car Audio Capacitor Cap Digital and 4GAMPKIT-SFLEX Q Power Super Flex 3000W Amplifier Installation Kit

  • CAPACITOR: E.S.R (Equivalent Series Resistance) 0.0015 Ohms @ 120Hz.
  • 3 Digit Blue Voltage Meter Displays 0.1V Increments.
  • QUALITIES: Blue illuminated window with music response.
  • Warning Tones for Reverse Polarity Connection, Over Voltage and Low Battery Voltage.
  • CAPACITOR SPECIFICATIONS: Dimensions: 11" (L) x 6 1/2" (W) x 3" (H).
  • AMPLIFIER KIT: Handles up to 3000 watts of power.
  • Ready for complete amplifier installation.
  • KIT INCLUDES: Deluxe high quality fuse holder.
  • 17 feet of 4 gauge Super Flex orange power cable.
Check Stock

Treedix 5 pcs Prototype Shield Board Compatible with Arduino Mega 2560 Solderable Universal BreadBoard PCB Double Sided Tinned Gold Plated Holes

  • Perfect for Arduino mega sized base board and other programming boards.
  • Convenient for the prototypes and circuit design experiment and other DIY projects..
  • Used for electronic experiments and point-to-point DIY soldering projects, can be expandable with pin header and female header, designing your own Arduino kits..
  • Standard IC spacing 2.54MM hole plated through among the pad can be perfectly working with 3mm&5mm LED Diode kit, Electrolytic Capacitor kit, Monolithic Ceramic Capacitor kit, Resistor kit, etc..
  • Electroless Nickel Gold finished prevent the copper on PCB from being oxidized and corroded and is good for soldering and touching..
  • Made of glass fiber FR-4 material, features high heat resistance, corrosion resistance, mechanical strength, insulation..
Check Stock

Treedix 3 pcs Prototype Shield Board Solderable Universal BreadBoard PCB Double Sided Tinned Gold Plated Holes with Female Header Compatible with Arduino Mega 2560

  • The Breadboard Kit is convenient for the prototypes and circuit design experiment and other DIY projects. Perfect for Arduino mega board and other programming boards..
  • Used for electronic experiments and point-to-point DIY soldering projects, can be expandable with pin header and female header, designing your own Arduino kits..
  • Standard IC spacing 2.54MM hole plated through among the pad can be perfectly working with 3mm&5mm LED Diode kit, Electrolytic Capacitor kit, Monolithic Ceramic Capacitor kit, Resistor kit, etc..
  • Electroless Nickel Gold finished prevent the copper on PCB from being oxidized and corroded and is good for soldering and touching..
  • Made of glass fiber FR-4 material, features high heat resistance, corrosion resistance, mechanical strength, insulation..
Check Stock

LC200A Inductance Inductor Capacitance Capacitor L/C Multimeter Meter Tester

  • This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range is 0.001-100.0R, support in circuit testing..
  • It is the series resistance inside the capacitor, and 100kHz is used to remove the impedance 1/(2*pi*F*C). When the impedance becomes smaller, the real series resistance value can be measured to determine whether the capacitor is bad/damaged or in good condition..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test..
  • During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.【Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.】.
  • Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.Equipped with a SMD alligator clip for more accurately testing..
Check Stock

MTX Terminator TNP212D2 1200 Watt 2 Ohm Dual 12 Subwoofers/Sub Box/Amp Package Bundle with Rockville RXC2D 2 Farad Stiffening Power Capacitor & RWK81 Amp Installation Wire Kit 3 Items

  • Package Includes: (1) MTX Terminator TNP212D2 1200 Watt Dual 12” Subwoofers. (1) Rockville RWK81 8 Gauge Complete Amp Installation Wire Kit with 100 % Copper RCA. (1) Rockville RXC2D 2 Farad Stiffening Power Capacitor. Features for dual subs + box: Dual Loaded 12" Subwoofer Enclosure. 2 12" Terminator Series Subwoofers Included. 1200 watts peak output. 400 watts RMS. 2" Aluminum voice coils. Single 4 ohm voice coils per sub (pre-wired down to a 2 ohm load). Rubber Surround. Polypropylene Cone.
  • MTX Logo on Dustcap. 48oz. Magnet. Frequency response: 37-150 Hz. Dual 12" Sealed Sub Enclosure. 5/8" MDF Solid Construction. Durable Black Carpeting. Stylish Logo in Carpet. Dimensions: 13.875"H x 29.625"W x 13.875" D. Amp Features: Terminator Series Class D Monoblock Car Amplifier. 400 x 1 watts peak @ 2 omhs. 200 x 1 RMS @ 2 ohms. LED power and protection indicators. Selectable bass boost (0, 6, 12 dB at 40 Hz). Mono gain control. Smart engage auto turn-on circuitry.
  • Built-in adaptive cooling fans. Built in low-pass filter (85 Hz, 18 dB/octave). CEA-2006 compliant amplifier. Frequency response: 20-85 Hz. Dimensions: 13-1/16"L x 10-3/16"W x 2-1/4"H. 8 AWG power and ground leads recommended. THD at Rated RMS Power: 1%. Signal-to-Noise Ratio: 73 dB. Fuse Ratin....
Check Stock

Sealed Unit Parts MFD10 LED Display Digital Capacitori Tester

  • The Supco Capacitor Tester is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications.
  • Supco Capacitor Tester provides the fastest measurements of capacitor values with one hand operation.
  • Supco MFD10 has accuracy ± 5% and range of 0.01 to 9,999 MFD.
  • The high quality Supco Capacitor Tester includes soft carying case for easy transport of device and test clips.
  • Repair your appliance with confidence when you choose Supco Capacitor Tester.
Check Stock

Capacitor 45 5 MFD 370V Dual Run Round Capacitor for Condenser Straight Cool or Heat Pump Air Conditioner

  • 45 5 / MFD 370 volt AC capacitor: round dual run capacitor.
  • Size: the dual run capacitor measures 3.88 x 2 inches/ 9.86 x 5 cm.
  • Range of temperature: the round capacitor can work from -40u2109 to 158u2109/-40u2103 to 70 u2103.
  • UL certificate: This dual run capacitor is built to the toughest USA standards for AC motor run capacitors including EIA-456-A and IEC 60252-1:2001.
  • Note: 370 45 4 capacitor compatible with GE C3455R, 97F9895, Z97F995, 97F9895BZ3, 27L880, TRCD455, 97F9895.
  • The brand and model mentioned above is just for demonstrating capability.
Check Stock