Reviews Glock 23 Suppressor Sightss

DLP Tactical GlockClip Gun Clip MOLLE/Belt Holster for All Generations Glock 17 19 22 23 34 35 (Black)

  • Fits all generations Glock 17, 19, 22, 23, 34, 35.
  • Works with nearly any weapon light, rear sight, or suppressor.
  • Attaches to MOLLE / PALS webbing or belts up to 2” wide.
  • Rotates and locks in 360 degrees for multiple carry options.
  • Non-marring reinforced polymer construction.
Check Stock

Black Kydex Holster Compatible with Glock 19 23 32 Surefire X300 Ultra-A Model

  • Compatible with Glock 19 23 32 Surefire X300 Ultra A Model (rail clamp).
  • OWB (outside waist band) Holster- Vertical Draw Right Hand Use.
  • Genuine .80" Kydex- 1.5" Injection Molded Belt Loops for attachment. Minimal width allows and ergonomical curve contours to hip for maximum concealability..
  • OWB design will clear a RMR RDS Optics and Aftermarket Taller Suppressor Sights (up to .365)..
  • SUPERB CONSTRUCTION WITH OUTSTANDING QUALITY 100% MADE IN THE USA.
Check Stock

Suppressor Height Sights Set, Suppressor Sights for Precise Targeting, Front and Rear Sights Compatible for Glock 17 17L 19 26 27 33 34 38 39 All Models Except 42 and 43.

  • ...with a fortress finish coating for maximum protection. The matte black will reduce any glare with some standard sights. The front sight comes with a mounting screw and the rear sight has a co-witness setup combo, which improves stability and visibility during the day..
  • 【Higher Brightness & Precise Shooting】These suppressor height Glock sights set are raised up allowing you to see over the top through the window, which largely help increase higher brightness and precise shooting..
  • 【Special Three-dot Sight Design】Sits just high enough over the body to see but not overly high that it would take too much real estate in glass window. The front sight is slim and the rears are wide which are great for fast sight acquisition..
  • 【Easy to Install】These suppressor height sights set works well with all optics co-witness and is very easy to install. Step1.Loosen the allen head on the glock with the hex key allen wrench and then clean the holes up. Step2. Pull the hex nut screw off and install the front sight. Step3. Put your finger on the front sight and put the screw back. Step4. Slide and push the rear sight. Use the sight pusher tool if you rear sight is tight, do not try to use a hammer and punch..
  • 【Wide Compatibility】This suppressor front and rear....
Check Stock

Concealment Express Tuck IWB KYDEX Holster fits Glock 19/19X/23/32/45 (G1-5) | Right | Black

  • ...designed & crafted Aluminum molds. This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all our ho.
  • EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw. Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights. Full Length Sweat Guard & Rear Sight Shield to protect your weapon from sweat. Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying. We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw..
  • ADJUSTABLE ‘POSI-CLICK’ RETENTION, RIDE HEIGHT, & CANT: When you holster your Glock 19/19X/23/32/45 (Gen 1 – Gen 5), you’ll hear a satisfying ‘CLICK’ letting you know your weapon is securely holstered & won’t come out unless YOU want it to. Retention pressure is adjustable, as is ride height (Standard, Shallow & Deep Conceal). Cant (Carry Angle) is adjustable from -30 to +30 Degrees, allowing you to angle the holster perfectly for appendix (AIWB), strong side, behind the hip or cross draw carry.
  • OPTIONAL ACCESSORIES – CLAW COMPATIBLE: Our Glock 19/19X/23/32/45 (Gen 1 – Gen 5) Tuckable IWB Holster is now Claw Compatible. Our ....
Check Stock

Raven Concealment Systems Perun OWB Holster Glock with TLR1HL

  • Fits: Generation 3-4 Glock 17 19 22 23 31 32 34 35 with a Streamlight TLR-1HL weapon light attached. Does NOT fit the TLR-1 or TLR-1s.
  • Compatible with most slide-mounted red-dot optics (like the Aimpoint T-1, Trijicon RMR, etc.) and accommodates suppressor-height front sights up to....
  • Muzzle-end of the holster has an opening sufficient to accommodate most common aftermarket extended and threaded barrels (with thread protectors).
  • Fully ambidextrous for right and left hand users.
  • Includes: One holster with full body shields. Three pair of 1.5 inch belt loops (LH 10 degree cant, RH 10 degree cant, and ambi 0 degree cant),....
Check Stock

Concealment Express OWB Belt Loop KYDEX Holster fits Glock 19/19X/23/32/45 (G1-5) | Ambidextrous | Black

  • ... & uniform features across all our holsters..
  • EXCLUSIVE HOLSTER FEATURES: Slide Mounted Optics / RMR / MOS / Red Dot Compatible. Undercut Fully Enclosed Trigger Guard protects the trigger area and also keeps the KYDEX from interfering with your draw. Over-Cut Open-Face design accommodates Threaded Barrels and clears Suppressor Height Sights. Fiber Reinforced Stealth 1.5″ Belt Loops for secure OWB Carry. We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw..
  • ‘POSI-CLICK’ RETENTION + ADJUSTABLE CANT & RIDE HEIGHT: When you holster your Glock 19/19X/23/32/45 (Gen 1 – Gen 5), you’ll hear a satisfying ‘CLICK’ letting you know your weapon is securely holstered & won’t come out unless YOU want it to. Ride Height is adjustable via our Patent Pending Belt Loops. Cant (or Carry Angle) is also adjustable from -15 to +15 Degrees, allowing you to angle the holster perfectly for strong side (hip) carry..
  • 100% MADE IN USA – GUARANTEED FOR LIFE: Our holsters are designed and built from start to finish in the USA by Americans on All US made Machinery & Equipment for a level of quality that is unparalleled. Our Quality & Durability is engineered into each holster from the start. ....
Check Stock

Concealment Express OWB Paddle KYDEX Holster fits Glock 19/19X/23/32/45 (G1-5) | Right | Black

  • ...d & crafted Aluminum molds. This ensures unparalleled consistency, fit, quality, durability, lightness, comfort, & uniform features across all our holsters..
  • EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw. Over-Cut Open-Face accommodates Threaded Barrels and clears Suppressor Height Sights. Full length Sweat Guard & Rear Sight Shield to protect your weapon from sweat. Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying. We utilize all Black Oxide Steel (Phillips) hardware with Threadlock, so you can easily make adjustments but never lose a screw..
  • ADJUSTABLE ‘POSI-CLICK’ RETENTION & CANT: When you holster your Glock 19/19X/23/32/45 (G1-5), you’ll hear a satisfying ‘CLICK’ letting you know your weapon is securely holstered & won’t come out unless YOU want it to. Retention pressure is fully adjustable via the black oxide steel hardware forward of the trigger guard. Cant (or Carry Angle) is adjustable from -5 to +20 Degrees, allowing you to angle the holster perfectly for appendix (AIWB), strong side, behind the hip or cross draw carry posit.
  • 100% MADE IN USA – GUARANTEED FOR LIFE: Our holsters are designed and built from start to finish in the USA by Americans on All US mad....
Check Stock

Glock Suppressor Height Sights Fits Glock 48, 43 & 43X Tall Suppressor Height Sights Red Dot Co-Witness MOS Compatible

  • Versatility & Durability: Use in mid to high-light situations as your back up sights.
  • Much stronger than any other plastic Glock sights set.
  • V-Shape Sight Picture: Tyrant Designs suppressor height sights co-witness and offer a unique v shape sight picture helps narrow shot placements to the tiniest groupings.
  • Light Deflection: Chevron “v” stye serrations help deflect light at 45 degree angles instead of just one direction like other Glock sights.
  • Strong: Precision machined from aerospace grade aluminum for maximum durability and usability.
  • Tyrant's Glock sights are manufactured to last a lifetime.
Check Stock

TRUGLO TRU-TEC Micro Red Dot Sight Open Reflex Optic, Red Dot, Picatinny Mount

  • 3-MOA Red-Dot reticle for fast acquisition, 23mm x 17mm multi-coated objective lens, Digital push-button brightness controls, 10 brightness settings.
  • TRUTEC MICRO mounts to optic-ready pistols using a common mounting plate bolt pattern. The optic co-witnesses with suppressor-height or high-profile sights. Fits Glock MOS and similar systems.Does not fit RMR specific slide cuts unless you use the RMR specific TRU-Tec Micro (TG8200B)..
  • Ultra-lightweight (just over 1 oz.), CNC-machined from aircraft-grade aluminum.
  • Unlimited eye relief, Auto-off feature preserves battery life, Water-resistant (sealed o-ring design).
Check Stock

Trijicon Glock Bright & Tough Sight Suppressor (Green Front Lamp & Yellow Rear Lamps), Multicolor

  • INCREASED HEIGHT: Specically engineered to allow use with a suppressor or as backup iron sights for a slide-mounted red dot sight, such as the Trijicon RMR.
  • INSTANTLY VISIBLE SIGHT PICTURE IN NO-LIGHT AND LOW-LIGHT SITUATIONS: Tritium phosphor- lled glass lamp provides battery-free glow, allowing for a visible sight picture in all lighting situation.
  • ENHANCED PROTECTION FROM HEAVY RECOIL AND HARSH CLEANING SOLVENTS: Tritium gas lamps are contained within protective aluminum cylinders and have additional silicone rubber cushioning.
  • SAPPHIRE WINDOW: Each Trijicon tritium lamp is capped with a sapphire jewel which helps to evenly distribute the light from the tritium lamp as well as protect it from solvents and puncture.
  • FITS GLOCK MODELS: 17, 17L, 19, 22, 23, 24, 25, 26, 27, 28, 31, 32, 33, 34, 35, 37, 38, and 39.
Check Stock