Reviews Glass Surface Lapping Machine

DMT DIAFLAT-95 95 Micron Dia-Flat Lapping Plate - Clear

  • Aggressive surface to facilitate quick and easy flattening of conventional and Arkansas stones and Waterstones.
  • DMT Diamond Hard coat Technology outlasts any other diamond coating in the market on lapping plate.
  • Largest surface area of any diamond lapping plate - 40 square inches or 50% larger than other diamond lapping plates.
  • Durable construction will provide years of performance and reliable service.
Check Stock

Beachcombing for Japanese Glass Floats

  • 10" x 4" x 1/2" thick float glass is ultra flat and sturdy.
  • Can be used as lapping plate and a flat reference plate.
  • Etched side uses Silicon Carbide powders for lapping all stone sizes and grits..
  • Flat side can use 1/2 wide full sheet of sandpaper or lapping film.
Check Stock

Taytool 279182 Single Sheet 5/16 x 5 x 12 Dead Flat Float Plate Glass with 7 Sheets 3M (TM) Lapping Microfinishing Film for Scary Sharp Sharpening System

  • This set contains a single sheet of 5/16 x 5 x 12 dead flat float glass and 7 sheets of 3M lapping film 4-1/4 x 11 in the following microns sizes .3. 1,3,5,12,30 and 40.
  • 5/16 Float glass is dead flat and the perfect substrate to attach abrasive sheets.
  • Float glass will accommodate a half sheet of lapping film.
  • Lapping film has Pressure Sensitive Adhesive (PSA) backing with 3 mil high-strength polyester film backing to minimize tearing.
  • The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective..
Check Stock

53021077 Lifters replacement For 4.7 Dodge/Chrysler Lash Adjusters HLA Replaces Part # 53021077 5073596AA (16 Packs)

  • VALVE LAP TOOL HELPS YOU SEAT VALVES ACCURATELY: Use the ABN Drill Valve Grinding Tool Attachment Valve Lapping Set to properly fit and seat valves into your vehicle engine.
  • Correct surface irregularities and remove sub-surface damage on your new valves with these motorcycle valve lapping tool small engine tools to fit perfectly into the valve guide for a secure fit.
  • For use with fine grinding paste (not included).
  • PERFECT VALVE LAPPING CUP SIZES FOR YOUR NEEDS: 4 attachable suction plates are included with this valve seat lapper tool kit to make fitting and seating various valve sizes in your lawnmower, chainsaw, car, or motorcycle.
  • Includes 20mm (3/4 inch), 30mm (1-3/16 inch), 35mm (1-3/8 inch) and 45mm (1-3/4 inch) synthetic rubber suction cups that are oil and UV resistant.
  • FITS YOUR TOOLS: Small engine valve lapping kit includes a 5 inch rubber roller attachment that has two 8mm (5/16 inch) steel shanks to fit your drill and the included suction cups.
  • Electric drill attachment provides increased control and productivity with less user fatigue while you put the finishing touches on your tune-up.
  • EASY TO USE: Clean all carbon deposits off valve and valve guide.
Check Stock

Wheeler Scope Mounting Kit Combo, 1-Inch/30mm - 545454 Engineering Professional Reticle Leveling System

  • INCLUDES: Torque Screwdriver Wrench, 10 screwdriver bits, Wheeler Level-Level-Level, 1" scope ring lapping bar, 30mm scope ring lapping bar, 1" scope ring alignment bars, 30mm scope ring alignment bars, lapping bar handle, lapping compound, thread lock.
  • VERSATILE: Provides virtually everything needed to properly mount any 1-inch or 30mm scope.
  • RELIABLE: Alignment and lapping of rings ensure maximum surface area contact between scope tube and rings.
  • ACCURACY: Reticle leveling is key for scope accuracy, the Level-Level-Level & the Professional Reticle Leveling System provide this, with an integrated bubble level for precise measurement & Reference Level with a magnetic bottom for added stability.
  • EASE OF USE: Securing fasteners properly is critical to accuracy, the Wheeler F.A.T. Wrench makes it easy.
Check Stock

Taytool 279205 Three Sheets 5/16 x 5 x 12 Deal Flat Float Plate Glass with 7 Sheets 3M (TM) Lapping Microfinishing Film 4-1/4 x 11 for Scary Sharp Sharpening System

  • This set contains three sheet of 5/16 x 5 x 12 dead flat float glass and 7 sheets of 3M lapping film 4-1/4 x 11 in the following microns sizes .3. 1,3,5,12,30 and 40.
  • 5/16 Float glass is dead flat and the perfect substrate to attach abrasive sheets.
  • Float glass will accommodate a half sheet of lapping film.
  • Lapping film has Pressure Sensitive Adhesive (PSA) backing with 3 mil high-strength polyester film backing to minimize tearing.
  • The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective..
Check Stock

Taytools 279199 Two Sheets 5/16 x 5 x 12 Dead Flat Float Plate Glass with 7 Sheets 3M (TM) Lapping Microfinishing Film 4-1/4 x 11 for Scary Sharp Sharpening System

  • This set contains two sheet of 5/16 x 5 x 12 dead flat float glass and 7 sheets of 3M lapping film 4-1/4 x 11 in the following microns sizes .3. 1,3,5,12,30 and 40.
  • 5/16 Float glass is dead flat and the perfect substrate to attach abrasive sheets.
  • Float glass will accommodate a half sheet of lapping film.
  • Lapping film has Pressure Sensitive Adhesive (PSA) backing with 3 mil high-strength polyester film backing to minimize tearing.
  • The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective..
Check Stock

Diamond Machining Technology (DMT) 12-Inch Dia-Sharp Bench Stone Extra Fine / Fine with Base (D12EF-WB)

  • Aggressive surface to facilitate quick and easy flattening of conventional and Arkansas stones and Waterstones.
  • DMT Diamond Hard coat Technology outlasts any other diamond coating in the market on lapping plate.
  • Largest surface area of any diamond lapping plate - 40 square inches or 50% larger than other diamond lapping plates.
  • Durable construction will provide years of performance and reliable service.
Check Stock

TEMO 0.5 Micron 50,000 Grit 5 Gram Diamond Lapping Paste Polishing Compound Syringe Final Finish for Jewelry, Metal, Ring, Gemstone, Glass, Coin

  • 0.5 Micron 50,000 Grit 5 Gram Diamond Lapping Paste Polishing Compound Syringe Final Finish.
  • EASY TO USE: Our diamond lapping paste syringes allow you to accomplish your polishing needs while avoiding contamination due to their practical design. They are best used with wool polishers for polishing..
  • USE OUR PRODUCTS AS: buffing compound, polishing compound, stropping compound, abrasive paste, metal polishing compound, epoxy polishing paste, lapidary diamond paste, resin polishing, rock polishing, granite compound. Works for both manual and machine polishing..
  • SUITABLE FOR: jewellery, gemstones, steel, hard metal, aluminium, zinc, glass, ceramics, marble, wood, granite, simichrome, rock, plastic, brass, acrylic. All metallurgical purpose. | INCLUDES: 1 pc 0.5 Micron (50,000 grit) - Final Polish (Creamy). Please see our other listings for different grit sizes..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

Shapton Glass Stone Seven

  • Includes 3 Shapton Glass Stones in 500, 2000 and 30,000 grits (25, 6.7 and .44 micron).
  • Stone Holder, Diamond Lapping Plate and Storage Box.
  • Stone Size: 160 x 37 x 12 mm - (6.3 x 1.45 x .47 inches).
  • The highest quality sharpening stone set we've seen. Exactly what you would expect from Shapton!.
Check Stock