Reviews Glass Drill Set

12 Pcs Diamond Drill Bits for Ceramic, Diamond Hole Saw Drill Bit Set Kit, Premium Glass Drill Bit for Bottles, Pots, Marble, Granite Stone, Tile Cutting 0.16 Inch - 1.18 Inch(4 mm - 30 mm)YLYL

  • 12 PCS DIAMOND HOLE SAW DRILL BIT SET INCLUDES: 0.16“/4mm(2pcs), 0.23“/6mm, 0.31“/8mm, 0.39“/10mm, 0.47”/12mm, 0.55“/14mm, 0.62”/16mm, 0.7“/18mm, 0.78”/20mm, 0.86”/22mm, 1.18“/30mm. The different sizes glass cutting drill bit to meet you various demands!.
  • SUPER MATERIAL: Glass drill bit for bottles are made of industrial grade carbon steel, sharp, fine workmanship and super wear-resistant, extended service life. Glass cutting drill bit are high quality and good performance that excellent for making clean and accurate hole..
  • WIDE USAGE: Diamond hole saw drill bit set kit removes a complete circle from glass, marble, tiles, granite, ceramic or other. Perfect for drilling glass, porcelain tile, granite, bottles, wood, blocks jars, ceramic marble and and other hard surfaces etc..
  • DIAMOND DRILL BITS FOR CERAMIC TIP: When you using the diamond hole saw, please use iubrication (water), iubrication will extend drill bits life..
  • SATISFACTION GUARANTEED: Our team is committed to providing every customer with good products and satisfactory service. If there are any probl....
Check Stock

Masonry Drill Bits Set (11PCS),Concrete Drill Bit Set for Glass,Tile, Brick, Cement, Concrete, Plastic, Cinder Block, Wood etc with Industrial Strength Carbide Tip,1/8\-1/2\ by amoolo

  • 【 11 PIECES SATISFY ALL YOU DEMAND】Masonry Drill Bit Set includes : 1/8" (3"Length*2), 1/4" (4"Length*2), 1/4" (6"Length*2), 5/16 (6"Length*2), 3/8" (6"Length*2), and 1/2" (6"Length*1)..
  • 【DURABLE INDUSTRIAL GRADE CARBIDE TIPS】amoolo Carbide Drill Bit Set are built for longevity excellent abrasion resistance, will stay sharper and make the drilling much more easier ;Drilling faster holes in bathroom tiles, or wall mirrors..
  • 【CUT PERFECT CIRCLES HOLES】U type slot design with fast drilling dust remove;3-flats shank allows drill bit to be held tightly and stably in power drill;Spiral shank increases cutting speed and prevents slipping,Please cooling with water and control the speed when drilling, then dry the water or apply the oil to prevent rusting after used..
  • 【MULTIPLE APPLICATION】Masonry Tile Drill Bit Set for use with electric or cordless hammer drills, Ideal for fast and efficient drilling through TILE, BRICK, CEMENT, CONCRETE, GLASS, PLASTIC, CINDERBLOCK, WOOD etc.×NOT for tempered glass drilling( (e.g. car glass)).Cannot be used on tempered glass (e.g. car glass)..
  • 【 WARRANTY 】If you are not fully satisfied for any reason, please contact us via Amazon for 100% refund or replacement..
Check Stock

10PCS 1/4 Inch carbide drill Tile Glass bit for Glass, Concrete, Marble, Plastic, Brick, Tile, Wood and Cement,etc

  • 【HIGH HARDNESS, DURABLE】High quality Tungsten carbide, and carbide with a reinforced head that prevents bit cracking and provides a longer life,the hardness is higher than the ordinary drill bit..
  • 【UNIQUE DESIGN】One drill bit replaces two drill bits (1 x glass & tile drill bit + 1 x Masonry drill bit), can easily drill holes on tile, concrete, brick, glass, ceramic, plastic, wood, etc.The U type slot design brings fast drilling dust remove, and 3-flats shank allows drill bit easy plug and to be held tightly..
  • 【WIDE APPLICATIONS】Spear pointed design strong tungsten carbide tip can easily penetrate various material, suitable for masonry wall, cement wall, concrete, tile, wood, metal, stainless steel, aluminum alloy, wood, bubble brick, etc..
  • 【10-PIECE DRILL BIT SET】The package includes 10pcs 1/4 Inch (6mm) glass and tile drill bits and a plastic storage box, easy to carry..
  • 【NOTE】When drilling hard material (glass, porcelain floor tile, marble or granite), please use water for lubrication..
Check Stock

Gunpla 10Pcs Multi-Material Drill Bits Set, Cemented Carbide Masonry Drill Bits for Glass, Plastic, Tile, Concrete, Brick, Wall, Wood and Brick Wall 6mm

  • 【ALLOY STEEL MATERIAL】: Gunpla drill bits set forged from premium ALLOY STEEL quality, glass drill bits provide smooth, accurate drilling in ceramic tile, marble, mirrors, glass, aluminum, concrete and wood. The durable drill bit must be kept well lubricated for the best possible results. This is most commonly done by running water over the drilling surface.
  • 【DIMENSION】: Designed with a 6mm Spear-pointed Tip, the multi material drill bits have a 1/4 inches design that reduces breakout. Length: 70mm, Shank: approx. 3/16 inches. Our spear head drill bits are heavy duty, meant to serve for a very long time..
  • 【APPLICATION】: Ideal for drilling ceramic tiles, glass, marble, and mirrors. When drilling hard materials, please use water for lubrication, good cooling can extend the service life of the drill bit. The glass drill bits are typically used with electric drills to create holes in all these cited material.
  • 【TUNGSTEN CARBIDE TIP】: The ceramic drill bit feature a Tungsten carbide tip for extended bit efficiency and life. During the process of drilling, the coating rubs away the glass, creating a perfect hole in the material being drilled.
  • 【WHAT YOU GET】: The package includes 10pcs 6mm glass and tile drill bits and a plastic storage box, ....
Check Stock

Diamond Hole Saw 15 pcs Diamond Drill Bits Set Glass Drill Bit Extractor Remover Tools for Glass Ceramics Porcelain Ceramic Tile 1/4 -2

  • 【EXTREME HARD 】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A....
  • 【EXTRAORDINARY SHARP】Each diamond hole saw has a smooth and exact finish that lower the incision resistance and drill pressure, increases....
  • 【LARGE CLEARANCE HOLE】These glass hole saw set along the drill bit facilitate the entrance of cooling water and escape of chips and other....
  • 【WIDE USAGE】 15 different drill bits included with this glass drill bit set to meet various demands. Perfect for drilling glass, tile,....
  • 【 LIVE SUPPORT 】 For any questions, call or email the contact information that comes with the package. We stand behind our high quality....
Check Stock

Diamond Drill Bit 10 pcs Glass Diamond Hole Saw Set Drill Bits Extractor Remover Tools for Ceramics Porcelain Ceramic Tile 6mm - 30mm

  • 【EXTREME HARD 】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A....
  • 【EXTRAORDINARY SHARP】Each diamond hole saw has a smooth and exact finish that lower the incision resistance and drill pressure, increases....
  • 【LARGE CLEARANCE HOLE】These glass hole saw set along the drill bit facilitate the entrance of cooling water and escape of chips and other....
  • 【WIDE USAGE】 10 different drill bits included with this glass drill bit set to meet various demands. Perfect for drilling glass, tile,....
  • 【 LIVE SUPPORT 】 For any questions, call or email the contact information that comes with the package. We stand behind our high quality....
Check Stock

30Pcs Diamond Drill Bits Glass Hole Saw Drill Bit Set Cutting Remover Tools for Glass Porcelain Tile Ceramic Marble Granite Bottles DIY(6mm-50mm)

  • [Scope of application]:Diamond Hole Saw bits are versatile drill bits that allow you to cleanly cut glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass. It is important to note that you must keep your drill bit wet as the friction of the bits and materials build up heat quickly.
  • [Diameter Range]: 16 different drill bits included with this glass drill bit set to meet various demands. Includes the following diameters: 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 35mm, 40mm, 45mm,50mm, 16pcs hole saw drills + 14pcs 6mm Hole opener.
  • [Supreme Quality]: These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes.
  • [Applicable Method]:1,Install the drill bit on a drill such as a hand drill.2,Since the hole opener does not have a central positioning bit, the hole is tilted at 45 degrees during operation, the speed of the drill is slowed down, and the glass and the stone are slowly contacted.3,When a glass or stone appears in a crescent (the crescent is positioned), then the vertical drill begins to work..
Check Stock

HOMEIDOL 6pcs Masonry Drill Bits Titanium Coated Glass Drill Bits Set 4 Cutting Edges Cross Spear Head Drill for Ceramic Tile Marble Mirror and Glass 4mm 5mm 6mm 8mm 10mm 12mm

  • [Quality Material] Masonry drill bits, concrete drill bit set made of high quality cemented carbide. Alloy with anti-rust treatment and a reinforced....
  • [Superior performance] Concrete Drill Bit, small incision resistance,feature drilling stably, fast speed, not breaking the border. Opening neat,....
  • [Wide Application] Professional glass and tile drill bits provide smooth and accurate drilling in ceramic tiles, marble, china, mirrors and glass.....
  • [Widely Fit] Professional Drill Bit Set, can be installed in the general electric hand drill, bench drill, impact drill and so on. The machine drill....
  • [Package Includes] 6pcs of masonry drill bits with the following tip diameters: 5/32” (4mm), 3/16” (5mm), 1/4” (6mm), 5/16” (8mm), 3/8”....
Check Stock

QWORK Multipurpose Drill Bits, 6 Pcs Set Multi-Material Drill for Drilling in Tile, Brick, Glass, Plastic and Wood

  • 1) One drill bit replaces two drill bits (1x glass & tile drill bit + 1x Mansonry drill bit), ideal for drilling fastner holes in bathroom tiles, or wall mirrors. Once it drills through the tile or mirror this drill bit will cope easily with any masonry behind it.
  • 2) Spear pointed design strong tungsten carbide tip can easily penetrate various material(tile, concrete, brick, glass, plastic and wood,etc) and reduces breakout.
  • 3) 6 Pcs drill bit set with 6 different sizes: 1x 3mm (1/8"), 1x 4mm(5/32"), 1x 5mm(3/16"), 1x 6mm (1/4"), 1x 8mm (5/16"), 1x 10mm (3/8").
  • 4) U type slot design with fast drilling dust remove, 3-flats shank allows drill bit to be held tightly and stably in power drill. When drilling hard material (glass, porcelain floor tile, marble or granite), please use water for lubrication.
  • 5) Heavy duty drill bits made by factory that manufactures products for big international tool brands with guaranteed quality. For genuine multi-material drill bit, please identify QWORK brand drill bits packed in sealed transparent plastic box with two sides of blue color stickers.
Check Stock

10 Pieces Masonry Drill Bits Set Glass Drilling Bits for Ceramic Tile Wood Porcelain Mirror Plastic Marble Wall with Strength Carbide Tips in Sizes-1/8, 5/32, 3/16, 1/4, 5/16, 3/8, 1/2 Inch, Gold

  • 10 PCS DRILL BITS coming with all popular sizes - 1/8”(1 INCLUDED), 5/32” (1 INCLUDED), 3/16” (1 INCLUDED), 1/4” (4 INCLUDED), 5/16” (1 INCLUDED), 3/8” (1 INCLUDED), 1/2” (1 INCLUDED), the long drilling bits can be firmly and stably installed on the electric drill, suitable for drilling holes in ceramic tiles and mirrors..
  • SUPERIOR QUALITY glass drill bits set: made of premium metal alloy and coated with zinc, rust-proof and corrosion-resistant, and the strength carbide tip provides durable and wear-resistant masonry drill bits for concrete..
  • MULTIPLE FUNCTION: drill bits set is widely applicable to ceramic tile, porcelain pot, marble, glass, wood and plastic, and can be used for installing mirror, towel rack and toilet paper roll in bathroom..
  • SPECIAL CARBIDE TIP: flat designed tip of masonry drill bit is sharp and performs well in penetrating objects, and the holes drilled are round and smooth without broken edges or tremor phenomenon..
  • PROFESSIONAL CUSTOMER SERVICE: please do not drill hole in the hard ceramic tile.
  • please do not use our masonry drill bit set with hammer drill, if you have any questions about this drill bits kit, please feel free to contact us..
Check Stock