Reviews Geekworm X820

Geekworm Raspberry Pi 4 SATA Storage, X825 V2.0 2.5 inch SATA HDD/SSD Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Only(Not Include Raspberry Pi)

  • 【Update】X825 V2.0 is the updated version from X825 V1.5. Metal case for X825 V2.0, refer to X825-C8(ASIN:B09295FHBW). Recommend to use with X735 safe shutdown board(ASIN:B07R45W1LN). You can use X825 V2.0 to DIY your family NAS via RaspNAS or OpenMediaVault etc. Document refer to WiKi search X825 V2.0.
  • √ X825 V2.0 can support up to 4TB 2.5 inch SATA hard disk drives (HDD)/solid-state drive (SSD), on theory the SSD capacity is no limit, but SSD thickness is limited by the standoffs height and it's case..
  • √ How to power RPi4&X825 V2.0: 5Vdc +/-5% ≥4A, Powered by Raspberry Pi 4 Type-C Power In port or DC jack of X825 V2.0.
  • √ How to power RPi4&X825 V2.0& X735: 5Vdc +/-5% ≥4A, Powered by X735 Type-C or DC Jack Power In port.
  • (Recommend Geekworm UL listed 20W 5V 4A Type-C power adapter(ASIN:B09J856PND)).
  • √ X825 allows booting OS from your HDD/SSD for faster app opens, web serving and file copying, refer to WiKi search X825 V2.0..
  • √ X825 for use with Raspberry Pi 4 Model B (1GB/2GB/4GB/8GB) only, does not support Raspberry Pi 3. For Raspberry Pi 3B+/3B use, refer to X820 (ASIN:B073CGQD9C)..
  • √ Note: NOT INCLUDE Raspberry Pi 4 board & SSD/HDD & Power Adapter..
Check Stock

Geekworm T300 2.5 inch SATA SSD/HDD Shield Storage Expansion Board+T300 Metal Case Compatible with NVIDIA Jetson Nano Developer Kit(A02&B01)

  • Geekworm 2.5" SATA HDD/SSD storage board compatible NVIDIA Jetson Nano A02/B01/2GB/4GB that supports up to 4TB 2.5-inch SATA hard disk drives (HDD) or solid-state drive (SSD), User manual, refer to Geekworm WiKi search T300..
  • T300 Metal Case with Power & Reset Switch & Camera Holder Compatible with NVIDIA Jetson Nano Developer Kit (A02 & B01) and T300 2.5 inch SATA SSD/HDD Shield.
  • WiKi for reference: wiki.geekworm.com/T300.
  • A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down. THIS IS VERY IMPORTANT!! Strongly recommend ASIN: B07413Q5Y4.
  • Equipped with power switch and reset switch, and it's reserve the GPIO hole and the installation space of the fan, recommend to use this Noctua NF-A4x20 5V PWM fan, refer to ASIN: B071FNHVXN, you can also use this 5V 4007 cooling fan (ASIN: B07WNH6Y8Y ).
Check Stock

Geekworm LattePanda Alpha/Delta Aluminum Alloy Passive Cooling Armor Case with 4007 5V Cooling Fan Kit for LattePanda Alpha & LattePanda Delta Edition

  • This is an aluminum alloy armor case with cooling fan designed for LattePanda Alpha and Delta board by Geekworm.
  • All ports and slots of the case can match with LattePanda Alpha and Delta board perfectly.
  • The silicone grease is Shin-Etsu Shin-tsu X-23-7921-5, after our test it has excellent thermal conductivity.
  • Equipped with a 4007 dc 5v cooling fan for installing above the case, the fan dimensions is 40 x 40mm with 32±0.3mm hole. Use the M3 Nylon Screws....
  • Please pay attention to the fan connections. Installation video and user manual refer to Geekworm WiKi search LP2 Case..
Check Stock

Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard

  • ✔Geekworm design 12mm aluminum alloy heatsink for Raspberry Pi Compute Module 4 CM4.
  • User manual, refer to Geekworm WiKi search C235..
  • ✔Heatsink dimensions: 54x39x12mm/2.12x1.53x0.47inch.
  • ✔Support install 30mm (3007 or 3010) cooling fan above the heatsink for better heat dissaption.
  • ✔With one piece thermal pad, need to cut proper thermal pad to attach on the CPU of Raspberry Pi Compute Module 4.
  • ✔The C235 heatsink reserve the space to connect the extermal antenna for CM4. ✔The inclcuded PM2.5x16mm screws length is just for install CM4 module and C235 heatsink, no support CM4 IO board..
Check Stock

Geekworm T300 V1.1 2.5 inch SATA SSD/HDD Shield Storage Expansion Board Compatible with Jetson Nano A02/B01/2GB/4GB Developer Kit

  • Geekworm 2.5" SATA HDD/SSD storage board compatible NVIDIA Jetson Nano A02/B01/2GB/4GB that supports up to 4TB 2.5-inch SATA hard disk drives (HDD) or solid-state drive (SSD), User manual, refer to Geekworm WiKi search T300..
  • Ideal storage solution for Jetson Nano- 2.5" SATA HDD/SSD Shield.
  • for the T300 metal case, refer to ASIN: B07W7CNSR8.
  • for the T130 mSATA SSD shield, refer to ASIN: B088N6VZL8..
  • A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down. THIS IS VERY IMPORTANT!! Strongly recommend ASIN: B07413Q5Y4.
  • Specially-made USB3.1 bridge to connect with Jetson Nano - no additional cables needed.
  • Intelligent power management - Automatic powering off when system shutdown.
Check Stock

Geekworm Raspberry Pi 4 Aluminum Case, Raspberry Pi 4 Model B Heavy Duty Passive Cooling Metal Case/Housing with Heatsink Pillar for Raspberry Pi 4B Only-Black (P173)

  • Geekworm Raspberry Pi 4 passive cooling aluminum case - P173 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
  • Design with good heat dissipation, passive cooling design, net weight up to 184 grams, don't need to install the cooling fan or heatsink, this is a heatsink case..
  • Access to all ports of Raspberry Pi 4 Model B, GPIO cable interface is reservered, support to install the gpio cable..
  • Made of high quality aluminum material. Equipped with a copper heatsink to replace the thermal pad at the CPU part, and attach proper silicone grease (not included) on two sides of copper heatsink to get better heat dissipation.
  • Reserve the TF Card slot for easy access..
  • Note: The Raspberry Pi 4 Model B is not included in the packing list. for Raspberry Pi 4 PSU: Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
Check Stock

Geekworm Raspberry Pi Zero 2 W 18650 UPS Expansion Board X306 & USB HUB for Raspberry Pi Zero 2W/Zero W(Not Include Raspberry Pi)

  • 【Compatibility】Compatible with Raspberry Pi Zero 2 W & Pi Zero W, NOT support Raspberry Pi Zero..
  • 【One-Cell 18650 UPS HAT】Ideal Uninterruptible Power Supply (UPS) solution for Raspberry Pi Zero W/2W, Max 5.1V 4000mA Power Backup with 18650 single cell battery holder.
  • 【3-Port USB HUB】On-board three USB 2.0 Ports.
  • Gain 3 USB2.0, downstream ports which offer High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps).
  • 【How to Power】Power via USB Type-C 5V Power In port of X306.
  • (Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND) ).
  • 【Cooling Solution】Recommend to use with C296 aluminum heatsink(ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
  • 【Packing List】1 x X306 V1.1 Expansion Board.
  • Note: not inlcude Raspberry Pi board,18650 battery, GPIO Header & power adapter..
  • 【User Manual】Installation guide and user manual refer to Geekworm WiKi search X306..
Check Stock

Geekworm Raspberry Pi Zero 2 W Soft Router Dual 100M Ethernet Expansion Board X305 & USB HUB for Raspberry Pi Zero 2W/Zero W(Not Include Raspberry Pi)

  • 【Compatibility】Compatible with Raspberry Pi Zero 2 W & Pi Zero W, NOT support Pi Zero..
  • 【Dual 100M Ethernet】With dual 10/100M Ethernet ports, ideal for soft router applications, fully compatible with OpenWrt without the need for drivers.
  • 【2-Port USB HUB】On-board two USB 2.0 Ports.
  • Gain 3 USB2.0, downstream ports which offer High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps).
  • 【How to Power】Power via USB Type-C 5V Power In port of X305.
  • (Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND) ).
  • 【Cooling Solution】Recommend to use with C296 aluminum heatsink(ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
  • 【Packing List】1 x X305 V1.2 Expansion Board.
  • Note: not inlcude Raspberry Pi board & power adapter..
  • 【User Manual】Installation guide and user manual refer to Geekworm WiKi search X305..
Check Stock

Geekworm NASPi V2.0 2.5 inch SATA HDD/SSD NAS Storage Kit + 20W 5V 4A Power Supply with Safe Shutdown Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)

  • Geekworm NASPi offering an easy and fast way to create your home media center and building NAS or Web server for your raspberry pi 4 with a 2.5 inch SATA HDD/SSD..
  • NASPi is composed of three parts: X823 storage shield, X-C1 adapter board, heat dissipation system(include X823-A3 metal fan bracket and 4010 PWM fan), and they will be packed into a ALU-case to get a complete NASPi.
  • How to Power: 5Vdc +/-5% , ≥4A (Via Type-C Port of X-C1).
  • Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
  • SSD Thickness Description: NASPi supports SSD with a thickness not exceeding 9.8mm, most 2.5" HDD/SSD on the market are only 7mm thick..
  • How to Make the PWM Fan Work: PWM fan needs a PWM signal to start working, so need to install shell script (refer to above wiki), If the fan does not work in third-party OS, only remove the yellow wire of fan to let the fan run immediately..
Check Stock

Geekworm Raspberry Pi Zero 2 W SATA Storage, X301 2.5\ SATA HDD/SSD NAS Expansion Board & USB HUB Compatible with Raspberry Pi Zero 2 W / Zero W / Zero WH (Not Include Raspberry Pi & SSD/HDD)

  • 【Compatibility】Compatible with Raspberry Pi Zero 2 W & Pi Zero W / WH, not support Raspberry Pi Zero..
  • 【2.5" SATA HDD/SSD Shield & USB HUB】Ideal NAS storage solution for Raspberry Pi Zero 2 W/Zero W/WH to support 2.5" SATA HDD/SSD. With 3-port USB HUB..
  • 【How to Power】Power via USB Type-C 5V Power In port of X301.
  • (Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND) ).
  • 【Cooling Solution】Recommend to use with C296 aluminum heatsink(ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
  • 【Packing List】1 x X301 V1.0 Expansion Board.
  • Note: not inlcude Raspberry Pi board, SSGD/HDD & power adapter..
  • 【User Manual】Installation guide & document refer to Geekworm WiKi search X301..
Check Stock