Reviews Gauge Movement

Zinger Instrument Cluster Gauge Stepper Motor Repair Kit X27 168 Fits 03-06 GM Chevy Silverados Tahoes Yukons(7Motors+36Led Light Bulbs+Soldering Iron+Solder Sucker+Remove Tool+Flux Rosin Core Solder)

  • The latest premium gm instrument cluster stepper motors ,perfectly replacement for the XC5-168, X15-168 ,X25-168 and X27-168 that are in your gauge cluster for 2003 2004 2005 2006 GM GMC Chevy Silverado Trailblazer.
  • Stepper motor repair kit include:7 X27 168 motors+36 backlight led bulbs+soldering iron+solder sucker+remove tool+flux rosin core solder.
  • Used for the repair of the speedometer,tachometer,oil pressure gauge,transmission temperature gauge, battery voltage gauge, water temperature gauge or fuel gauge.
  • Fix common problems caused by stepper motor of your vehicles:gauges dead,chatter,sticking,false/jumpy/inaccurate readings,pegged out to the left or right of the dial, ratchet up or down,sticky needle movement,erratic gauge movement etc.
  • Our factory is auto accessories expert, excellent customer service with 12-month warranty.
Check Stock

Accu-Gage RA30X 5-30 PSI Right Angle Chuck Dial Tire Pressure Gauge with Hose

  • Gauge has a full geared, precision movement with bronze bourdon tube.
  • unlike piston-plunger-type gauges, the bourdon tube movement is not affected by....
  • Right angle chuck with flexible 11 inch hose between gauge and chuck for hard to reach tire valves.
  • Durable steel case with polished brass bezel, stem, pressure release valve assembly and a 2 inch dial.
  • 5-30 PSI steel case gauge (recommended for tire pressures 8-23 PSI).
  • Needle holds pressure reading until released and a pushbutton valve bleeds air to desired tire pressure.
Check Stock

Dr.Roc Compatible Instrument Cluster Gauge Stepper Motor Repair Kit Fits X27 168 03 to 06 with 7 Stepper Motors Soldering Iron Solder Sucker Chevy Silverado GM GMC

  • ...ometer,oil pressure gauge,transmission temperature gauge, battery voltage gauge, water temperature gauge or fuel gauge.
  • Solve the common problems of your vehicle such as, gauges cluster dead,chatter,sticking,false/jumpy/inaccurate readings,pegged out to the left or right of the dial, ratchet up or down,sticky needle movement,erratic gauge movement etc.
  • Each gauge of your instrument cluster need one stepper motor.Since one stepper motor went out,and it will result all other stepper motors go out soon. Checking the quantity of stepper motors for your vehicle to decide to buy the 6 or 7 one.It is easy to use for upgraded adjustable soldering iron,but you’d better to search the instructions Video on Internet first,which is very helpful..
  • The premium instrument cluster repair kit is compatible with Silverado,Suburban,Traiblazer,Tahoe,Avalanche,Impala,Monte Carlo,Malibu,SSR,Tracker,Venture.
  • Buick Rainier,Rendezvous,Lesabre and so on..
  • Dr.Roc-Most trusted auto accessories expert,millions buyers' choice, excellent customer service..
Check Stock

Dr.Roc Compatible Instrument Cluster Gauge Stepper Motor Repair Kit Fits X27 168 03 to 06 with 6 Stepper Motors Soldering Iron Solder Sucker Chevy Silverado GM GMC

  • ...ometer,oil pressure gauge,transmission temperature gauge, battery voltage gauge, water temperature gauge or fuel gauge.
  • Solve the common problems of your vehicle such as, gauges cluster dead,chatter,sticking,false/jumpy/inaccurate readings,pegged out to the left or right of the dial, ratchet up or down,sticky needle movement,erratic gauge movement etc.
  • Each gauge of your instrument cluster need one stepper motor.Since one stepper motor went out,and it will result all other stepper motors go out soon. Checking the quantity of stepper motors for your vehicle to decide to buy the 6 or 8 one..
  • The premium instrument cluster repair kit is compatible with XC5-168 (XC5168), X15-168 (X15168) ,X25-168 (X25168) and X27-168 (X27168,X27.168,X27 168) stepper motors.Regarding to the fitment,please kindly input your make, model and trim level into the Amazon Garage which is on the left of the page..
  • It is easy to use,but you’d better to search the instructions Video on Internet first,which is very helpful.Dr.Roc-Most trusted auto accessories expert,millions buyers' choice, excellent customer service..
Check Stock

X27 168 Stepper Motor Kit, Instrument Cluster Gauge Repair Kit Compatible with 03-06 GM Chevy Silverado (35 Led Light Bulbs+7 Motors+Soldering Iron+Solder Sucker+Remove Tool+Flux Rosin Core Solder)

  • FIX GLITCHES - High-quality motors that meet strict international quality standards to fix common problems caused by stepper motor of your vehicles: gauges dead, chatter, sticking, false / jumpy / inaccurate readings, pegged out to the left or right of the dial, ratchet up or down, sticky needle movement, erratic gauge movement etc. Each gauge of your instrument cluster need one stepper motor. Since one stepper motor went out, and it will result all other stepper motors go out soon.
  • YOU WILL GET - Complete instrument cluster repair kit includes 7 * Motors.
  • 1 * Flux Rosin Core Solder. Premium customer service with 1 year warranty! When it comes to delicate electronics it pays to get the highest quality parts the first time. You don't want to have to do this job twice due to cheap aftermarket Stepper Motors Kit failing on you.
  • NOTE - The new motor is installed, pay attention to see if it is installed, and then energize step on A foot accelerator, wait 3 seconds, as far as possible to avoid manual rotation of the motor, so as not to damage the motor speed ratio, and then look at the dashboard to see if it working properly. To make sure you can handle this wor....
Check Stock

Accu-Gage S60XA 5-60 PSI Swivel Angle Chuck Dial Tire Pressure Gauge with Bleed Valve

  • Gauge has a full geared, precision movement with bronze bourdon tube.
  • unlike piston-plunger-type gauges, the bourdon tube movement is not affected by....
  • Swivel angle chuck makes it easier to reach tire valves.
  • Durable steel case with polished brass bezel, stem, pressure release valve assembly and a 2 inch dial.
  • 5-60 PSI steel case gauge (recommended for tire pressures 15-45 PSI).
  • Needle holds pressure reading until released and a pushbutton valve bleeds air to desired tire pressure.
Check Stock

Accu-Gage S15XA 3-15 PSI Swivel Angle Chuck Dial Tire Pressure Gauge with Bleed Valve

  • Gauge has a full geared, precision movement with bronze bourdon tube.
  • unlike piston-plunger-type gauges, the bourdon tube movement is not affected by....
  • Swivel angle chuck makes it easier to reach tire valves.
  • Durable steel case with polished brass bezel, stem, pressure release valve assembly and a 2 inch dial.
  • 3-15 PSI steel case gauge (recommended for tire pressures 5-12 PSI).
  • Needle holds pressure reading until released and a pushbutton valve bleeds air to desired tire pressure.
Check Stock

Lichamp AC Gauges A/C Manifold Gauge Set for R134a R22 R12 R502 Professional #A302

  • 1. Multifunctional A/C Gauge Set, professional 3 way automotive air conditioning diagnostic manifold gauge set will compatible with R 134A R12 R22....
  • 2. Extra large and colored dials with fahrenheit degree unit is easy to read, gauge rated 500psi (red) and 350psi (blue) max pressure. Sight glass....
  • 3. Include 4 pieces extra long 5FT and high impact hose, thickening hose body with precise valve core depressor and 45 degree bend on one end for....
  • 4. Precise movement with upgraded gauge shell, stands up to heavy use and accidental drops, all metal parts made from durable bass and aluminum....
  • 5. Come with every thing you need for a efficiently ac charging work, package include: 3 way gauge, 3pc hoses, 2pc Adjustable R134A Adapters, puncture....
Check Stock

Sew Tech Premium 5in1 Sliding Sewing Gauge Ruler with Hem Gauge, Seam Gauge, Buttonhole Guage and Circle Function for Accurate Sewing Quilting Measuring and Marking, with a Sewing Seam Ripper

  • 5 Functions in 1 Gauge - Sew Tech sliding sewing gauge is adjustable and super functional, can be used as hem gauge, seam allowance gauge, buttonholes gauge, "T" gauge, and circle compass.
  • Upgraded Locking System - Sew Tech sewing gauge ruler’s sliding part always lock in place securly and keep your desired measurement through our improved locking system, helping to prevent accidental movement of the sliding part and wrong measurement.
  • Accurate Measurements - Sew Tech sliding guage ruler features a clear scale, allowing you to mark even lines easily. The 1/8’, 1/4’, 5/8’ marked in black lines at the end of the sewing rulers helps you to measure and mark precisely.
  • Premium Quality - Sew Tech measuring gauge is made of selected high-quaility plastic, durable and capable for a long time use.
  • An Extra Sewing Seam Ripper Included - Sew Tech sliding gauge is a versatile tool suitable for sewing, quilting, waving, measuring, stitch work. It is a perfect gift set that comes with a sewing seam ripper for your family and friends who love sewing, card-making, paper artworks, or DIY crafts.
Check Stock

DELTA 50-278 Mobile Machine Base (For 10-Inch Cabinet Saws)

  • Heavy-gauge steel and features a foot-operated control lever that raises and lowers the base for easy movement and positioning.
  • Compatible with Delta hybrid saws and the Delta 36-750 cabinet saw.
Check Stock