Reviews Gasket Bending Grooving Machines

CNC Spoilboard Surfacing Router Bits, SIMILKY 1/2 inch Shank 2 inch Cutting Diameter, Slab Flattening Router Bit Planing Bit Wood Milling Cutter Planer Woodworking Tool

  • ...hnology provides excellent abrasion resistance and sharp edges, and precise cutting will reduce chipping and burrs..
  • [WIDE RANGE OF APPLICATIONS] This professional bottom router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoil board, but also for trimming and slotting/grooving.Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand)..
  • [APPLICABLE EQUIPMENT] Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. wood engraving machines, trimming machines, etc..
  • [APPLICABLE EQUIPMENT] Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machines, trimming machines, etc..
Check Stock

Meihejia 1/4 Inch Shank Straight Dado Router Bit Set - 5 Sizes

  • 1/4 inch shank straight dado router bit set. Cutting diameter: 1/4", 3/8", 1/2", 5/8", 3/4"..
  • C3 micro-grain tungsten carbide blades, high-quality alloy steel bodies. Heat resistant Teflon coating..
  • Useful for edge treatment and grooving, great for all kinds of dado and other standard applications..
  • Suitable for solid wood, particleboard, MDF, plywood, etc. Create very smooth cuts..
  • Designed for the hand-held and table-mounted router, it can not be used in electric drill & drill machines..
Check Stock

Lathe Grooving Blade, Lathe Turning Inserts CNC Grooving Cutting Tool (MGMN 150-PCD)

  • MULTIPLE USES: lathe Grooving Inserts can meet a variety of cutting requirements, such as cutting aluminum, copper and its cemented carbide, non-ferrous metals and some non-metals..
  • MATERIAL: CNC lathe Grooving Inserts are made of high-quality diamond materials, with high hardness, high impact resistance, high heat resistance, etc. The Grooving Inserts is not easy to break ..
  • SERVICE LIFE: Due to the high wear resistance and durability of lathe Grooving Inserts, its service life is longer than that of grooved inserts made of general materials, and it is more cost-effective..
  • PRODUCT DESIGN: CNC lathe Grooving Inserts adopts a reasonable and professional design, and the size is also very standard, so the product is stable and reliable in the processing process and has good processing performance..
  • QUALITY ASSURANCE: lathe Grooving Inserts are manufactured through strict standard procedures, and the product quality is qualified. If you have any after-sales problems, please contact customer service and we will deal with it in time..
Check Stock

Genmitsu CNC Router Bits 1/8 inch Shank Straight Router Bits Nano Blue Coat 2-Flute End Mill Cutter for Wood MDF PVC Acrylic, 10 PCS, SR10A

  • High Quality: Nano Blue Coating for extended tool life and performance. Perfect for Roughing operations, slots and more..
  • Efficient Cuts: The 2-Flute Straight Router Bits have a mirror polish and large chip space which produces smooth cutting and fast chip-removal..
  • Shank diameter: 1/8''(3.175mm), cutting diameter: 1/8'' (2.175mm), cutting length: 17mm, overall length: 38mm, comes with 10pcs 1/8 shank 2-Flute Straight Router Bits..
  • Applicable Materials: Suitable for MDF, PVC, Acrylic, wood, solid wood, chipboard, plywood, organic board, core board, etc. Widely used for cutting/ engraving/ carving/ grooving/ slotting/ drilling/ hollowing/ positioning/ roughing / milling..
  • Wide Compatibility: Genmitsu SR10A 2-Flute Straight Router Bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
Check Stock

10pics Organ BLx1 for Home Serger Needle Size 12 Ball Point

  • Needle for certain embroidery machines and deep penetration applications. Recommended for 3D (with thick gum filling) embroidery and Sequin..
  • The blade design of the "KK" version corresponds to the standard DBXK5 needle. However, due to its shorter shank, bending resistance is lower..
  • This needle is round at the shank and are normally used on commercial embroidery machines. This needle will not work on home based embroidery machines..
Check Stock

Genmitsu CNC Wood Carving Router Bits Set, 1/4'' Shank, 4 PCS, 15° Detail Carving Liner+ 20° Profile bit+ 60° & 90° V Groove, WC04A

  • High Quality: Made of Premium Tungsten Carbide Steel Alloy. That's great for milling and cutting performance, ensuring that our bits stay sharp and provide nice clean cuts. The Nano Blue Coating with high hardness and heat resistance is durable and not easy to break..
  • Efficient Cuts: This wood carving set comes with 4 PCS, 1/4” shank router bits. 1PCS 20° profile bit for etching and outlining.
  • 1PCS 15° carving liner for fine lines and details.
  • 60° & 90° V groove bits for multiple background depths..
  • Shank diameter: 1/4''(6.35mm), cutting diameter: 0.2mm, overall length: 50mm..
  • Applicable Materials: Suitable for MDF, PVC, Acrylic, wood, solid wood, plywood, organic board, etc. Highly recommended for wood carving. Widely used for cutting/ engraving/ carving/ grooving/ slotting/ drilling/ hollowing/ positioning/ roughing / milling..
  • Wide Compatibility: Genmitsu WC04A Wood Carving Router Bits Set are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
Check Stock

OSCARBIDE 1/2\ Shank Nickel Plated Indexable Lathe Turning Tool Holder 7 Pieces/Set,CNC Heavy-Duty Metal Lathe Cutting Tools for Turning Grooving Threading Parting Cut Off Holders Set

  • ❤This carbide lathe turning set Includes two 95° bits (SCLCR 3/8-2 and SCLCL 3/8-2), one 93° bit (SDJCR 3/8-2), one 90° bit (SWGCR 3/8-2.5), one 62.5° bit (SDNCN 3/8-2), one flat threading bit (SER 3/8-2) and one grooving bit (MGEHR 3/8-2). Recommend for CNC and traditional milling machines..
  • ❤Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general metal lathe cutting tools. The set is used for semi-finishing/roughing steel , metal , great for turning, grooving or threading..
  • ❤Each tool holder comes with a TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action. And swap out or rotate the indexable carbide tips to maintain a sharp and precise cut..
  • ❤Metal lathe accessories designed for easy material removal, perfect for aluminum, brass, bronze, cast iron, steel, stainless steel, plastic, titanium and more.The entire set is contained in a premuim aluminium storage case that protects and organizes each tool and stacks and stores easily..
  • ❤TJATSE is a leading manufacturer of production cutting tools for industry. Our goal is to provide to our customers cutting tools that are On Spec and On Time and tha....
Check Stock

Genmitsu CNC Router Bits 1/4 inch Shank Straight Router Bits Nano Blue Coat 2-Flute End Mill Cutter for Wood MDF PVC Acrylic, 5 PCS, SR05A

  • High Quality: Made of tungsten steel that's great for milling and cutting performance, ensure your work efficiency. The Nano Blue Coating with high hardness and heat resistance is durable and not easy to break..
  • Efficient Cuts: The 2-Flute Straight Router Bits have a mirror polish and large chip space which produces smooth cutting and fast chip-removal..
  • Shank diameter: 1/4''(6.35mm), cutting diameter: 1/4'' (6.35mm), cutting length: 25mm, overall length: 55mm, comes with 5pcs 1/4 shank 2-Flute Straight Router Bits..
  • Applicable Materials: Suitable for MDF, PVC, Acrylic, wood, solid wood, chipboard, plywood, organic board, core board, etc. Widely used for cutting/ engraving/ carving/ grooving/ slotting/ drilling/ hollowing/ positioning/ roughing / milling..
  • Wide Compatibility: Genmitsu SR05A 2-Flute Straight Router Bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
Check Stock

PARADE Harem Pants - Essentials Black 12-18 Months

  • HAREM PANTS: Our organic harem pants are made for moving and grooving! Finally, comfy pants that will cover that cute cloth diaper bum (well, all diapered bottoms of course). Find matching kimono onesies & wrap shirts in our collection..
  • SINCE 2004: Parade Organics was one of the of the very first baby lines in North America to use only certified organically grown cotton, and continues to be committed to responsible production under fair trade practices..
  • GOTS CERTIFIED ORGANIC: We use 100% luxuriously soft organic cotton, certified by GOTS international, the Global Organic Textile Standard. Our line is grown and manufactured in India..
  • PRINTED BY HAND: Our fabrics are printed with eco friendly inks by real people, not machines! Variations occur - we think it's part of the charm & hope you agree..
  • SENSITIVE SKIN: We use nickel free snaps & Azo free dyes to protect baby's sensitive skin..
Check Stock

Cobaso Red Silicone Filter Holder Group Gasket For Marzocco Espresso Machines

  • A higher quality upgrade for your Marzocco espresso machine gaskets.
  • Enjoy cleaner shots with the food grade, odorless, tasteless gaskets.
  • The silicone gasket is easier to remove, easier to install and more durable.
  • The gasket will fit most modern E61 machines and has a height of 8mm. Dimensions 71.4mm x 54.5mm x 8mm.
Check Stock