Reviews Gas shielded Welding Wires

9TRADING Replacement Mig Welding Gun Stinger Torch Lead 4 Clarke 130EN 180EN Welder Parts

  • The gun is 10 ft long, and will handle .023", .030", and .035" steel, stainless steel, and flux cored wires..
  • There is a gas valve in the handle, so this gun can be used with or without gas..
  • The gas hose extends 6 ft beyond the end of the gun, the trigger wires have the correct connector for the 130EN and 180EN welders, and the cable which carries the welding current extends 20" past the end of the gun..
  • You can see the gas hose, trigger connector, and the welding current cable in the second picture..
  • This gun uses the same Clarke contact tips, gas nozzles, and gas diffusers..
Check Stock

WeldingCity Mild Steel MIG Welding Wire ER70S-6 11-Lb Roll 0.030\ (0.8mm) 8\-spool

  • Premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas..
  • Conformed to AWS A5.18/ASME SF A5.18/ER70S-6.
  • spool wrapped in moisture-resistant plastic film..
  • Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm)..
  • Typical element content (wt%) in product: C=0.08.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity Mild Steel MIG Welding Wire ER70S-6 11-Lb Roll 0.035' (0.9mm) 8'-spool

  • Premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas..
  • Conformed to AWS A5.18/ASME SF A5.18/ER70S-6.
  • spool wrapped in moisture-resistant plastic film..
  • Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm)..
  • Typical element content (wt%) in product: C=0.08.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity 2-pk Mild Steel MIG Welding Wire ER70S-6 11-Lb Spool 0.035\ (0.9mm) 8\-roll | Pack of 2 Rolls

  • Two rolls premium quality mild steel gas-shielding MIG welding wire ER70S-6 11-lb spool. Copper coated welding wire for GMAW welding process with shielding-gas CO2 or Ar/CO2 mixed gas..
  • Wire diameters available: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm)..
  • Conformed to AWS A5.18/ASME SF A5.18/ER70S-6.
  • wrapped in moisture-resistant plastic film..
  • Typical element content (wt%) in product: C=0.08.
  • Two 11-lb rolls at this price. U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

YESWELDER ER70S-6 .030-Inch on 10-Pound Spool Carbon Steel Mig Solid Welding Wire

  • [ER70S-6] It's the most common wire of the copper-coated mild steel GMAW (MIG) wires for single or multiple pass welding..
  • [Good Performance] ER70S-6 has the highest combination of manganese and silicon deoxidizers, permitting higher welding currents with 100% CO2 shielding gas and leaving a smoother weld bead with little to zero post-weld cleanup..
  • [Applications] Great for construction work, farm implement fabrication, shaft buildup, tanks, truck bodies and general shop applications with poor fit-up or rusty, oily plates..
  • [Brand-new Plate] Use new ABS materials, which are more durable and more resistant to falling than ordinary ones..
  • [Specifications] Weight: 10lbs(4.5kg)/Diameter: .030''(0.8mm).
Check Stock

iMeshbean® Complete Replacement Mig Welding Gun for Clarke 180EN and 130EN Mig Welders

  • This is a great replacement for Clarke 180EN and 130EN 160EN Mig Welders.
  • This welding gun will handle .023", .030", and .035" steel, stainless steel, and flux cored wires..
  • Length: 10 FT,There is a gas valve in the handle, so this gun can be used with or without gas..
  • The gas hose extends 6 ft beyond the end of the gun, the trigger wires have the correct connector for the 130EN and 180EN welders, and the cable which carries the welding current extends 20" past the end of the gun..
Check Stock

Fox Alloy E71T-GS .030\ Flux Core Welding Wire Gasless Mig Wire - 2 Lbs Spool Welding Wire Mild Steel Filler Metal (0.8 mm)

  • 2-lb spool 0.030" gas-less E71T flux-cored ( FCW ) mild steel MIG welding wire with sturdy packaging, and comes with a 0.030'' contact tip.
  • Welding Wire E71T-GS conforms to AWS A5.20 (E71T-GS), AWS A5.36 (E71T14S-AZ-CS3), ISO 17632-A (T42 Z Z V N 1).
  • Flux core welding wire E71T-GS is self shield, no shielding gas needed, single-pass fillet and lap welding, all positional, low welding fume, minimum spatter,Smooth arc action,High feedability,Filler Metal welding wire is easy to weld in indoor and outdoor.
  • Mild steel welding wire E71T-GS is applied in welding of thin plate steel structure, i.e, doors， fence..
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

iMeshbean® Replacement Mig Welding Gun Stinger Torch Lead for Clarke 130EN 160EN 180EN Welder Parts 10 FT

  • This is a great replacement for Clarke 180EN and 130EN 160EN Mig Welders.
  • This welding gun will handle .023", .030", and .035" steel, stainless steel, and flux cored wires..
  • Length: 10 FT,There is a gas valve in the handle, so this gun can be used with or without gas..
  • The gas hose extends 6 ft beyond the end of the gun, the trigger wires have the correct connector for the 130EN and 180EN welders, and the cable which carries the welding current extends 20" past the end of the gun..
Check Stock

Flux Core Welding Wire ARCCAPTAIN E71T-GS .030 2-Pound Spool Gasless Carbon Steel Mig Welding Wire

  • Welding Easy and Quick: AWS E71T-GS 030” Flux Core welding wire (The actual Net Weight of Wire is 2LB), no need for shielding gas, install it then you can welding all positions, single and multi pass welding. Great for T-joints, butt welds & lap welds..
  • Great Welding Performance: Smooth arc action and High feedability, you will love the less splatter when do your welding project. The flux filling acts as a shielding agent to create beautiful and clean welds. Perfect for Professional welder, metalworking hobbyist, or DIY enthusiast..
  • Self shielded gasless mig welding wire works well on rusty, dirty and painted Material, also strong resistant to base material oil pollution, perfect for use outdoors, high-altitude, and other different environments..
  • Professional Packing: Flux core welding wire is vacuum packed for waterproof, moistureproof, dustproof, then ensure optimum welding performance and effect..
  • Trusted Quality and Service: The mig welder wire was passed TÜV TEST, which made of the finest quality materials and using state of the art technology from a twenty year factory offering in the welding MIG accessories that conform to the high standards..
Check Stock

Flowmeter Hose with 5/8\-18 Male Connectors - 5 Feet Long

  • For its use with Flowmeters for Shield Gas in TIG and MIG Welding.
  • Gas Service: Argon, Argon/CO2 Mixtures, Helium.
  • 5 feet hose with 5/8"-18(M) connector fits flowmeter and all major welder brands. Designed for MIG and TIG welding.
  • 290 psi Max Pressure - Braided and flexible - Manufactured in high quality rubber..
Check Stock