Reviews Gas Line Pliers

NEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case

  • NexADD 4Pcs Fuel Line Pliers Set Does It All★- Eliminate the problems associated with removing fuel line connectors or undo fuel lines.This set includes 4 Pcs fuel line hose pliers,a hose remover pliers, a 9'' fuel filter caliper, a hose pipe clamp clip and 80 degree disconnect pliers . You’ll save about 30 percent when you buy NexADD fuel line pliers combo kits instead of buying each tool . Just Add to Cart!.
  • Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
  • Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum openin....
Check Stock

Mardatt 7 Pcs Automobile Hose Remover Pliers and Hook Set Include Brake Line Pinch Pliers, Separator Pliers, Fastener Remover Hook, Pipe Repairing Tool for Auto Radiator Vacuum Hoses Trim O Ring

  • 【High-value Hose Removal Tool Set】 You will get 1 pcs hose removal pliers, 3 sizes hose clamp pliers(large, medium, small), 1 pcs fastener remover hook, 1 pcs V-type hose clamp removal hook & 1pc U-type hook, totally 7 pcs. In addition, quipped with a storage bag for convenient storage and carry. The complete tool kit for most practical size satisfy daily repair..
  • 【Hose Clamp Pliers 】 Made of durable nylon with excellent non-conductive and rust-proof.
  • Work great on close off flexible hoses without damage. Fully insulated to reduce risk of short circuit. Leaving your hands free to repair. A wide range of sizes to fit most applications. But NOT for use on rigid, reinforced, or high pressure lines..
  • 【Line Tube Hose Remover】High-grade materials ensure quality performance over the lifetime of the tool. Designed to facilitate quick and easy access into tight areas with flat and thin head. Remove Fuel, Vacuum or Heater Hoses from 5/32”to 1/2”(4mm to 14mm) diameter. Simple to use, push the vacuum hose or fuel line off the fitting or tube by sliver jaw..
  • 【Fastener Remover and Hook Set】The fastener remover is designed for removing automotive audio equipment, trim panels, door panels, window trim, emblems and metal clips without damaging upho....
Check Stock

Booms Fishing X1 Aluminum Fishing Pliers Hook Remover Braid Line Cutting and Split Ring with Coiled Lanyard and Sheath

  • X1 fishing pliers is aluminum handle and stainless steel jaws and other parts construction. It can open split ring remove hooks and cutting braided line.
  • [Aluminum Handle Inset Spring] Using aluminum handle is more lightweight and support inset the braided line cutters. The pliers can automatically open when there loaded spring.
  • [Feature Fishing Jaws] The stainless steel jaws added a small hook at the top for opening the stubborn split rings it can help you repair your lure. There also with a split lead and single-barrel crimping position.
  • [Super Braided Line Cutters] Unlike the previous pliers, Aluminum fishing pliers can cutting braided line and mono line for inset braided cutters. You just line up the pliers you can get smooth and clean cut.
  • [Secure your Pliers, No Lost Again] We plus a steel wire coiled lanyard and nylon holster to always keep this handy tool within easy reach and security. You can wear on you belt or you fishing bag, keep you hands free.
Check Stock

CLAYTON MACHINE WORKS Firewall Mount Brake/Gas Pedal Assembly P/N TA-206-BKA1

  • Hose Clamps: These flexible pinch off pliers can lock into position leaving your hands free to repair.
  • please note that these are not for use on rigid, reinforced, or high pressure lines.
  • Multi-Use: These tools are ideal to use as coolant hose clamp pliers, fuel line clamps, brake line clamp, and even as fuel line clamp pliers.
  • Reliable Material: These hose pinch pliers kit are durable, light weight, non-conductive and rust-proof, easy to use.
  • Dimensions: The large pliers measure approximately 9.93 x 2.12 x 0.75 inches, the medium pliers measure 7.18 x 1.87 x 0.75 inches, the small pliers measure 6.12 x 1.62 x 0.62 inches.
  • What's Included: You will receive a total fo 3 hose pinch off pliers in 3 different sizes.
Check Stock

CertBuy 6 Pack Hose Pliers Pinch, Hose Clamp Tool for Flexible Hoses, Brake Hoses, Fuel Hoses, Gas Lines, Radiator Hoses, Red.

  • ✔ The flexible hose clamp kit is ideal for brake hoses, fuel hoses, gas lines, radiator hoses, lawnmower fuel gas lines and more..
  • ✔ 6 pack (3 sizes) plastic clamp pliers is one reason to choose us, you can get enough hose pliers with right money..
  • ✔ Nylon material makes our hose clamp tool durable and light weight, closing off flexible hoses..
  • ✔ Bright red color makes hose clamp pliers easy to find when you use them, give you convenience..
  • ✔ Lock design plastic tubing clamps pliers, easy to lock different openings..
Check Stock

Car Hose Removal Plier Tool, Fuel Vacuum Tube Pliers Hose Removal Tool, Fuel and Vacuum Line Remover Separator Pliers Pipe Repairing Tool

  • Hose Removal: This line and pipe separator pliers is mainly used to remove stubborn hoses on heater water tanks, radiators, pumps, air filters, etc..
  • Durable Material: This line and pipe separator pliers are made of steel, sturdy and durable, not easy to damage.
  • Strong Practicability: This line pipe separator pliers has a compact design and strong practicability.
  • Comfortable Handle: This line pipe separator pliers is designed according to ergonomic principles, and the rubber-coated handle is labor-saving and comfortable to use.
  • Applicable Size: This line and pipe separator is suitable for removing fuel, vacuum or heater hoses with a diameter of 5/32 inches to 1/2 inches (4mm to 14mm).
Check Stock

Long Nose Fishing Pliers Stainless Steel Fish Hook Pliers Hook Remover Split Ring Pliers with Lanyard for Freshwater Saltwater

  • Long Nose Pliers for fishing,Nice and deep to reach into toothy fish to retrieve hooks.Stainless Steel material protects pliers fishing from corrosion.
  • 【Simple easy to use】Great rubber grip on the handles makes for comfortable use.These fishing pliers are small, light and convenient..
  • 【Mini but powerful】This Stainless Steel fishing pliers can even cut braided fishing line with no problems at all.
  • 【Non-slip】The fish hook plier handle is not a smooth hard plastic, and the grip design is perfect for both hands, no problem in wet conditions..
  • fishing pliers Length: 7inch,Weight: 3.5oz,Multifunction Fishing Tools :fishing pliers hook remover,fishing pliers saltwater ,Saltwater Resistant Fishing Gear,Carbide Cutters,fishing line cutters,Fishing Pliers Hook Remover.
Check Stock

Yarlung 6 Pack 3 Size Plastic Hose Clamp Pliers, Line Clamps Pinch Pliers for Flexible Hoses, Brake Hoses, Fuel Hoses, Gas Lines, Coolant Hoses, Radiator Hoses, Red

  • Include 6 pack 3 size lightweight plastic red clamp pliers, measure 6.3, 7.5, 10inch in length, non-condutive and rust-proof..
  • Our plastic clamp pliers close off flexible hoses while leaving them undamaged. Fully insulated to reduce risk of short circuit..
  • These pliers can lock into position leaving your hands free to repair. Not for use on rigid, reinforced, or high pressure lines..
  • Ergonomic Handle Design: The grips of clamp pliers are anti-slip and provide extra comfort, easy control to reduce hand fatigue..
  • Great for use on brake hoses, fuel hoses, gas lines, coolant hoses, radiator hoses, lawnmower fuel gas lines and more..
Check Stock

Swpeet 121Pcs 7-22mm Spring Band Hose Clamps with CV Boot Hose Clip Pliers Assortment Kit, Silicone Vacuum Hose Action Pipe Clamp Low Pressure Air Clip Clamp for Hose Clamps

  • What You Get --------- In this kit, You will get 120Pcs 12 Sizes Assorted Spring Band Hose Clamps, Including 7mm.
  • 22mm. Have 12 Sizes and each sizes 10Pcs. Including 1Pcs CV Boot Hose Clip Pliers. These Tool kit can meet all your daily needs..
  • A Good Hose Clip Pliers ----- Designed for quick and easy removes and installs clic and clic R hose clips. Clic r clamp is good tool for the job as a automotive tech.Use this crimping pliers daily makes takes clips off easy and is practical for personal use. PVC Handle Design, Handles covered by plastic for comfort and grip when using cv boot clamp pliers..
  • High Quality ------ Spring Clips Made of high quality 65Mn Spring Steel, anti-corrosion and durable for long time use. Great product for your fuel line repairs. Great price and quality. These pliers are constructed from high carbon steel with a Manganese Phosphate coating to prevent rust and corrosion. Highly recommend..
  • Great Value for Kit, Get The Right Tool, Much Easier ------------ Perfect for lower or medium pressure. Get the right tool to install or remove. Work best o....
Check Stock

OEMTOOLS 25440 Professional Tube Bending Pliers Bends Brass Copper Steel and Aluminum Brake Lines of Diameters 5/16 3/8 3/16 and 1/4 Steel

  • BRAKE LINE BENDER: This tube bender is ideal for working on brake lines.
  • Brake line bending tool is designed to bend brass, copper, steel, and aluminum brake lines.
  • Tubing benders can make left, right, and offset bends up to 90-degree angles.
  • DUAL-SIZED ADAPTERS: The brake tube bender comes with two dual-sized adapters for different sizes of brake line diameters.
  • Pipe bender tool works on 1/4 inch, 5/16 inch, 3/16 inch, and 3/8 inch diameters of mild steel and soft tube material.
  • MINIMIZES DAMAGE: Our brake line tube bender features forged separators with knife edges to minimize damage to parts.
  • Safe soft copper tubing bender and metal tubing bender for any brake line kit.
  • Excellent tubing pliers for mild steel pipes and tubes.
  • HEAVY DUTY MATERIAL: These tubing bender pliers are made of alloy steel for additional strength and durability, ensuring these brake line forming pliers last for years to come.
  • Sturdy manual tubing bender makes the job much easier.
  • BRAKE LINE PLIERS PRODUCT SPECIFICATIONS: Size: 10.5 Inches.
  • Two Dual-sized Adapters for 5/16, 3/8, 3/16, and 1/4 Inch Brake Line Diameters.
  • Left, Right, and Offset Bends Up to 90-degree Angles.
Check Stock