Reviews Gas Line Hose

Kegerator CO2 Gas Line Beer Hose Beer Gas Line 5/16 Red Gas Line 3/16 Beer Line with Hose Clamp for Home Brewing Beer Tower Beer Keg Kegging by PERA

  • 1.Include: 5ft Clear Beer Hose ID 3/16" OD 7/16", 5ft Red Gas Hose ID 5/16" OD 9/16", two pcs 8-12mm Hose Clamps and two pcs 10-16mm Hose clamps.
  • 2.Material: PVC Material for Beer Gas Line and Stainless Steel for Worm Clamps.
  • 3.Future: 1/4" Wall thickness of The Gas hose can endure a higher pressures of a draft system. The Beer tube can resistant most alkali, alcohol, and mild acids and chemicals. Worm Clamps will confirm no leak problem during the connection.
  • 4.Widely Use: The Beer Tube usually connect Beer Tower, Beer Keg, Beer Kegerator and the Gas Tube usually Connect Gas Regulator, Gas Manifold, Tank. This set will complete your Home Brewing Beer Keg System.
  • 5.Guarantee: Quality Guarantee, any problem for Beer Gas Line with Worm Clamps, Money Back or Replacement free..
Check Stock

Kinchoix 24" Flexible Yellow Coated Gas Hose Connector Kit for Stove Dryer Furnace Gas Water Heater Flexible Gas Line with Connector 3/4" FIP & 3/4"MIP Fitting

  • ...」- The gas hose connector kit mainly includes a 24in gas hose, 2 pc 15/ 16 -16 UN x 3/4'' FIP, 2 pc 15/ 16 -16 UN x 3/4'' MIP (Tapped 5/8'' FIP) and a sealing tape. Factory leak tested 100% pass!.
  • 「COMPATIBLE WITH」- A stainless steel gas line hose mainly use for connecting gas stove, gas dryer, furnace, gas water heater. Gas pipe outside dimension of 1'', inner diameter 3/4''. Thicker pipe diameter can transmission gas quickly..
  • 「STURDY MATERIAL」- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, comes with a 3/4" male brass fittings on both end, standard male and female pipe threads for easy connection..
  • 「EASY TO INSTALL」- Easy to install the hose connector kit for your gas dryer. Only one wrench and a little bit teflon tape are all you need to install the hose..
  • 「CAUTION」- The connectors and fittings are designed for use only on the original installation and not to be reused for another gas appli....
Check Stock

3Ft 6AN 3/8" Fuel Line Hose Braided Stainless Steel W/2pcs AN6 Hose Fitting Kit Blue & Red Universal for Racing Fuel, Gas, Coolant etc

  • Stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas ,vacuum, hydraulic fluid, lube, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line..
  • Braided Steel Fuel Line Maximum Working Pressure (psi): 1000 psi. Bursting Pressure(psi): 6000psi. Working Temperature Range: -40℉ to 257℉(-40℃ to 125℃). Please make sure the pressure and temperature range is suitable for your application before purchase..
  • Include a universal 3Ft fuel hose and 2pcs swivel hose ends.
  • Inner Diameter: AN-6 (3/8") - Outer Diameter: AN-9 (9/16").
  • Double stainless steel braid cover for excellent flexibility and resistance to abrasion. This hose is perfect for extreme environments where there is extra heat or where chaffing might occur..
  • Professional installation is highly recommended. Warranty: CarBole offers 3-month warranty for the steel braided hose..
Check Stock

20FT 6AN 3/8\ Nylon Stainless Steel Braided CPE Oil Gas CPE Fuel Line Hose,black

  • ▶Nylon and stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, swap fuel line..
  • ▶Black Braided Steel Fuel Hose Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Working Temperature Range: -40℉ to 150℉. Please make sure the pressure and temperature range is suitable for your application before purchase..
  • ▶Length: 20 Feet. Inner Diameter: 5/16" (8.71mm). Outside Diameter: 0.56inch (14.22mm). Please measure before purchase!.
  • ▶Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • ▶Professional installation is highly recommended. The AN6 nylon braided fuel hose is designed for use with 6AN swivel style hose end fitting. All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution..
Check Stock

Vinco s - OsteoSheath4 - 120 Tablets by Vinco

  • Package Including: 20 Ft Braided Fuel/Oil/Gas Line Kit(10pcs 6AN hose fitting + 20Ft AN6 Stainless Steel Oil line).
  • Universal Application: The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas....
  • Hose Material: Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The fitting is made of T6061 Aluminum,high strength and good durability..
  • Working Temperature: -40 F to +248 F. Working Pressure:500 PSI.
  • Excellently Sealed,100% no leaking .Exchange or return if leak..
Check Stock

Red Gas Line Air Hose,Co2 Tubing Hose ID 5/16

  • 3.Widely Use: The Gas Tube specified to beer industry standards. Perfect for your home brewing needs, regulator, gas manifold, kegerator, Cornelius Keg, pin or ball lock keg, beer draft systems or other equipment.
  • 1.Include: 10ft Red Gas Hose ID 5/16″ OD 9/16″.
  • 5.Guarantee: Quality Guarantee, any problem for Beer Gas Line with Worm Clamps, Money Back or Replacement free..
  • 2.Feature: PVC Food Grade Material. 1/4″ Wall thickness of The Gas Hose can endure a higher pressures of a draft system and allow a kink resistance for a tight bend radius.
  • 4.Tips: Sometimes the Gas Hose is very hard to connect, you can put the hose in the hot water, then connect the equipment.
Check Stock

Gas Connector Kit 24 inch Yellow Coated Stainless Steel, 3/8” OD Flexible Gas Hose Connector for Gas Log and Space Heater, 1/2" FIP x 3/8" MIP Stainless Steel Fittings, 24” Gas Appliance Supply Line

  • FOR SPACE HEATER AND GAS LOG. This stainless steel gas line hose has a 40,000 BTU capacity, designed as a gas connector for space heaters/gas logs. 24 in. long with a 3/8” outer diameter and 1/4” inner diameter. Includes a 1/2" FIP x 3/8" MIP stainless steel fitting..
  • CORRUGATED DESIGN FOR FULL FLEXIBILITY. A corrugated gas appliance gas connector offers maximum flexibility, as the corrugated design makes for a flexible gas hose by allowing to bend and snake the yellow coated gas line connector into small spaces, bends, and corners..
  • REINFORCED HEAVY-DUTY QUALITY: Our gas supply connectors are quality tested and CSA certified, to serve you faithfully for years to come. Gas hose withstands 30 bends without leakage and 15 applications of 90 degree twists. Works in temperatures up to 800 degrees. Fittings create a leak-free seal within a torque of 1,040 inch-pounds..
  • EASY INSTALLMENT: No special tools required to install this gas connector. Includes stainless steel corrosion-resistant fittings with threaded end connections which easily connect to your gas supply line, and create a secure, leak-free seal..
Check Stock

Gas Hose Fuel Line Spring Clips Fuel Filters for Tomberlin Crossfire 150R Yerf Dog Spiderbox 150cc Kandi Trailmaster 150 XRS Buggy Carter Brothers Go karts Parts

  • Package : 1pcs Red Hose Tube Line and 2pcs Fuel Filter and 4pcs Spring Clips.
Check Stock

EXCELFU Flexible Dryer Gas Hose Dryer Gas Appliance Line Connector with Fittings Compatible with 1/2' OD 1/2' MIP x 1/2' FIP Hose Connection, Stainless Steel(6 Feet)

  • Hose Fittings are compatible with 1/2" MIP and 1/2" FIP, it can create a secure metal connection for heavy-duty use.
  • Designed for gas dryer: This 72" Flexible Stainless Steel Gas Appliance Line is not universal, it is mainly designed for gas dryers and not for ovens or ranges.
  • Product Parameters: Inner dimensions of this line are 3/8", Outside dimensions of this line are 1/2".
  • Corrugated design: This gas line hose with corrugated design can achieve full flexibility, it snaked into small spaces including corners and bends easily.
  • Easy to install: No tools need to install the piping. It come with male and female iron pipes for easy connections. Make sure you are in need of 1/2 gas piping otherwise this will not fit.
Check Stock

LASCO 10-1259 Flexible Coated Stainless Steel Gas Range Supply Line 72-Inch 5/8 Inch ID with 3/4 Inch Pipe Thread Fittings

  • Premium quality gas hose and fantastic value!.
  • Made with durable material to withstand time.
  • Works as both Natural Gas hose or Propane line.
  • Great for different types of gas powered projects.
  • Most commonly used as Gas Range Connector.
Check Stock