Reviews Gas Injector

Tool Daily Adjustable Soap Chemical Injector for Pressure Washer, 3/8 Inch Quick Connect

  • ATTENTION: Working pressure is 1000 to 2800 PSI. Flow rate is from 2 GPM to 5 GPM. 2800 PSI or higher will not work. Power washer chemical injector kit includes chemical injector, 10 Feet tubing, filter and black soap nozzle..
  • Application: Must Follow Manual to Set Up Chemical Injector. It is used to siphon detergent out of separate container. The chemical runs after pump. So it allows for a wider choice of chemicals..
  • Chemical injector has standard 3/8’’ quick connect fitting. It connects pressure washer pump to hose..
  • Dilution ratio of chemical vs water can been adjusted by controlling metering valve..
  • Works with most brands of gas and electric pressure washer. Suitable for cold and hot water pressure washer..
Check Stock

Raincovo Downstream Injector for Pressure Washer Power Washer Chemical Injector Kit Soap Injector 3/8 Inch Quick Connect 4000 PSI

  • Package: Kit Includes chemical injector, 10 feet siphon hose, filter, black nozzle soap with 1/4” quick connect and teflon tape..
  • Application: When detergent is sucked out separately, the chemical will not pass through the pump, you could use a variety of chemicals without....
  • Characteristic: Chemical injector kit with a metering valve, which can adjust dilution ratio of soap and water. Avoid clogging of the injector and....
  • Connector: Downstream Injector has 3/8 inch quick connect. Fits most electric and gas power washer..
  • Material: Siphon hose is made of high-quality PVC, used for hot and cold water. Adapter is made of brass and stainless steel. Max pressure is 4000....
Check Stock

Gumout 510019 Fuel Injector Cleaner, 6 oz. (Pack of 6)

  • Two 5.25 fl oz bottles of STP Super Concentrated Fuel Injector Cleaner.
  • Fuel additive contains concentrated detergents for effective car care.
  • Dissolves and removes carbon, gum and varnish deposits that can be harmful to fuel injectors.
  • Jet fuel works as a carrier to deliver the active ingredients effectively.
  • STP fuel injector cleaner helps to prevent hard stops, lost acceleration and rough idling and helps save gas.
  • Use this additive with every oil change or every 4,000 miles.
Check Stock

Rislone Hy-per Fuel Complete Fuel System Cleaner Gas

  • Six in one: equal to a bottle of regular injector & complete fuel system cleaner, upper cylinder lubricant, fuel stabilizer and conditioner, dry gas, gas treatment and octane booster.
  • Increase power and performance: boosts octane, power, performance and mileage, stabilizes gas, lubricates and protects.
  • Save gas: cleans and lubricates the complete fuel system.
  • engine dynamometer tests show improved fuel economy.
  • Run smoother: helps eliminate noisy injectors and fuel pumps, rough idle, hard starting and hesitation.
  • regular use provides reduced fuel system and emission control repairs..
  • EPA registered: will not void manufacturer’s new vehicle warranty and safe to use on vehicles with oxygen sensors and catalytic converters.
  • exceeds epa compliance performance criteria and is epa registered.
Check Stock

YZHIDIANF 6 Pcs FJ1147 62410 Fuel Injector 0280158233 Fits For For:-Ram ProMaster, For:-Jeep Grand Cherokee Wrangler, For:-Dodge For:-Chrysler 3.6L V6 2011-2019, 05184085AC 5184085AD

  • ⭐⭐⭐⭐⭐【Little Secret】Because Of Individual Model Differences, If The Rubber Ring Does Not Fit, Small, You Can Remove The Rubber Ring Of The Injector Nozzle On The Original Car, Replace The Rubber Ring Of Our New Injector Nozzle, You Can Very Perfectly Solve The Sealing Problem And Rubber Ring Fit Problem.
  • 【Application】 Compatible with For:-Ram ProMaster 3.6L , For:-Jeep Grand Cherokee Wrangler 3.6L, For:-Dodge Avenger Challenger Charger Durango Grand Caravan Journey For:-Chrysler 200 300 Town & Country 3.6L V6 2011 2012 2013 2014 2015 2016 2017 2018 2019.
  • OEM/Alternate Part Numbers: 0280158233 05184085AC 4G2269 280158233 5184085AD 62410 812-11135 RL184085AC.
  • 【Preium Quality】 PREVENTS CORROSION AND BUILD UP with stainless steel slide and spring assembly, leading to longer service life of fuel injection system.REPLACEMENT FUEL INJECTOR PROMOTES SMOOTH ENGINE OPERATION and optimal gas efficiency.
  • can reduce harmful emissions caused by worn injectors.
  • 【Regular Cleaning Fuel Injectors】Generally Speaking, If The Car Is In Good Condition And The Fuel Quality Is Good, It Can Be Done Every 40,000-60,000 ....
Check Stock

WISAMIC Automotive Non-dismantle Fuel Injector Cleaner Kit and Tester with Case for Petrol EFI Throttle Petrol Cars, 750ML Tank, 145PSI

  • Non-Dismantle Fuel System Cleaner: This Fuel System is used to clean fuel injector, air intake system and three-way catalytic converter. It is a free disassembly cleaning tools that you can use it without the knowledge of car assembling..
  • Special Handing: Non-dismantle cleaner has special handling one-way valves to seal up gas and durable pressure regulating valves..
  • Multi-function: Our cleaner tool not only features with high and low pressure cleaning function, but also with the whole fuel system including throttle valve, fuel nozzle and combustion chamber..
  • Universal Feature: Non-dismantle fuel injector has anti-corrosion, anti-friction connectors for fast- connection and anti-friction oil tubes for all cleaning fluid..
  • Complete Cleaner Kit: This injector clean kit includes many different adapters, covering almost all the EU, Asia, USA cars and light trucks. Note: For some USA cars, you have to change the air plug to 3/8″ which is not included in the package..
Check Stock

AEM (30-3302) V2 Water/Methanol Injection Kit with Internal MAP Sensor

  • Boost Dependent controller features on-board MAP sensor with large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs.
  • Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid.
  • Pump does not cycle on/off and provides quiet, smooth operation.
  • it features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.
  • Precision-machined billet-aluminum injector with integral check valve.
  • three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500cc/min and 1,000cc/min).
  • tank-less 35 PSI Boost dependent gas water/methanol system.
Check Stock

Universal Fuel Injector Cleaning Tool, Non-Dismantle Fuel Injector Cleaner Tester Petrol Cleaner Kit 600ML 140PSI

  • 【Professional Cleaner Tool】 Improper cleaning of automobile fuel system will lead to TWC blockage and poisoning. fuel injector cleaner kit is a professional fuel injector cleaner, which can help you clean the whole fuel system quickly and simply, including TWC, intake manifold, throttle and exhaust pipe, etc..
  • 【EFI-Electronic Fuel Injection System】 There two types of Electronic Fuel Injection System, throttle or electronic injection. one engine with fuel-return pipe, another one engine without fuel-return pipe.Throttle Model: The way of connection is the same as EFI System, just adjust the pressure of the air source 1-5PSI..
  • 【Advantage of Non-Dismantle injector】 Can operate non-dismantle cleaning to Fuel System, it can operate cleaning air induction system, optional pipe clamp, fast and safe, multiple connectors match most European Union, Asian, American cars and light trucks..
  • 【Multifunctional Fuel Injection Cleaner Tool】 The non-dismantle cleaner has a special handling one-way valves to seal up gas and durable pressure regulating valves. In addition, it also has anti-corrosion, anti-friction connector....
Check Stock

Run-Rite G.D.I Preventative Maintenance Kit - Fuel System Cleaner for Gasoline Direct Injection Engine, Valves, Induction Components & Fuel Injector Cleaner Kit - Clean Carbon & Fuel Deposits - 2 Kits

  • Six in one: equal to a bottle of regular injector & complete fuel system cleaner, upper cylinder lubricant, fuel stabilizer and conditioner, dry gas, gas treatment and octane booster.
  • Increase power and performance: boosts octane, power, performance and mileage, stabilizes gas, lubricates and protects.
  • Save gas: cleans and lubricates the complete fuel system.
  • engine dynamometer tests show improved fuel economy.
  • Run smoother: helps eliminate noisy injectors and fuel pumps, rough idle, hard starting and hesitation.
  • regular use provides reduced fuel system and emission control repairs..
  • EPA registered: will not void manufacturer’s new vehicle warranty and safe to use on vehicles with oxygen sensors and catalytic converters.
  • exceeds epa compliance performance criteria and is epa registered.
Check Stock

Fuel Injector Cleaner Tool Car Fuel System Cleaner Kit Portable Non-Dismantle Cleaning Tools Fuel Injector Tester 600ML 140PSI Injector Cleaning Machine(Without Liquid)

  • 【Multifunctional Fuel Injection Cleaner Tool】 This injector cleaner tool can clean the entire fuel system, including the throttle valve, fuel nozzle and combustion chamber. At the same time, it also has a high and low pressure cleaning function to help you better complete the fuel system cleaning job..
  • 【Disassembly-Free & Dual-System Fuel System Cleaner Kit】The fuel system cleaner kit is used to clean the fuel injector, intake system and three-way catalytic converter. It can clean the car without disassembly. And it has two electronic fuel injection systems. One engine has an oil return pipe, and the other engine does not have an oil return pipe (Quick-connect anti-corrosion, anti-friction joints and anti-friction pipes for all cleaning fluids.).
  • 【Adjustment of Throttle Mode of Fuel Injector Cleaning Kit】The connection method is the same, just adjust the air source pressure to 1-5PSI. How to identify the inlet and return hoses: ①Generally speaking, the larger the inlet pipe, the smaller the return pipe.
  • ②There is always a filter interface on the side of the inlet hose and a buffer interface on the return side.
  • ③There is an arrow on the hose Indicate the fuel flow direction..
  • 【Widely Applicable Engine Cleaning Tools】 This injector c....
Check Stock