Reviews Gap Gauge

4 Pieces Stainless Steel Feeler Gauges Dual Marked Metric Feeler Gauge SAE Offset Valve Thickness Gauge 32-Blade Feeler Gauge Measuring Spark Plug Tool for Measuring Width Thickness

  • Feeler fauge sets: package contains 4 pieces of 32-pieces feeler gauge (measurement: 0.0015-0.035 inch/ 0.04-0.88 mm), adequate size to meet your use and replacement needs.
  • Suitable for designers, engineers, mechanics to measure the thickness of tappet clearances, spark plugs gaps and other hard to reach places.
  • Quality material: made of 65 manganese steel, each spark plug gap measuring tool is resistant to wear and tear and has nice strength, exquisite and durable, features nice precision and hardness, elasticity and wear resistance, lightweight and small size, easy to carry and storage.
  • Easy to identify: dual marked metric and SAE, through the fine manufacturing process, the number of sizes in the feeler gauge and its specifications are clear at a glance and easy to identify.
  • Warm tip: stainless steel feeler gauge has some anti-rust oil to prevent rust, please do not worry.
  • Foldable design: fastened by screws, removable, the plates are bound inside a chromed plate protector to prevent loss of individual plates, designed with a thumb notch for easy selection and expansion, when you use it, you can move the plate out, and when not in use, you can fold it back to prevent corrosion, bending, deformation and damage, simple and convenient.
Check Stock

Qagea Universal Spark Plug Gap Tool with Feeler Gauge Compatible with Most 10mm 12mm 14mm 16mm Spark Plugs

  • 【Precision】Universal 10mm 12mm 14mm 16mm spark plugs. Use a feeler gauge of the desired size to put in between the gaps. Then clamp the product with the product and release it to get the required gap.
  • 【Package】1 spark plug gap tool + 1 feeler gauge.
  • 【NOTE】Some spark plug electrodes will bounce back - this is normal for some spark plugs. If your clearance target is 0.39mm, we recommend 0.37mm so when it springs back you get 0.39mm..
  • 【Quality】The spark plug gap tool is manufactured by an ISO-certified manufacturer, we have very strict requirements on quality. 100% factory tested, and durable..
  • 【Warranty】2 years warranty for the spark plug gap tool! If you have any questions and needs, you can always contact Qagea by email, we will be happy to solve the problem for you..
Check Stock

CAMWAY 2Pcs Feeler Gauge Set Stainless Steel Metric/Inch 32 Straight Blade Steel Feeler Gauge,16pcs Feeler Gauge and 45º Blades Offset for Measuring Gap Width/Thickness Measuring Tools

  • 【Two Kinds of Feeler Gauge 】Feeler gauge set, straight feeler gauge with 32 pieces blades and 16-Piece blades offset valve bent feeler gauge..
  • 【Metric and Imperial Dual Marked】Dual marked metric and imperial the specification of every blade was clearly marked on the surface with laser technology so that you could easy identification the Feeler and choose the suitable one conveniently..
  • 【 360-degree Swivel Design 】The Feeler Gauge Set allows you to unfold or fold them easily and carry them with you. You could disassembled into a separate feeler gauge to use by adjusting the screw.Metal fastening screws,and durable..
  • 【Anti-rust 65 Manganese Steel】There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, And Please don't put on the humid environment..
  • 【Use for】The feeler gauge is used to measure the gap size. When checking whether the measured size is qualified, you can use this method to judge, or the inspector can judge according to the tightness of the feeler gauge and the measured surface.It is mainly used for checking the gap value between two joint surfaces..
Check Stock

2Pcs Feeler Gauge Set Stainless Steel Metric/Inch 32 Straight Blade Steel Feeler Gauge, 16Pcs Feeler Gauge and 45º Blades Offset for Measuring Gap Width/Thickness Measuring Tools

  • Feeler gauge set: 2 pack feeler gauges, made of 65 manganese steel, the measuring feeler gauge has 32 blades thickness and 16 blades thickness.
  • Foldable, easy and convenient to take and store.
  • Metric and Imperial Dual Marked：Dual marked metric and imperial the specification of every blade was clearly marked on the surface with laser technology so that you could easily identify the Feeler and choose the suitable one conveniently..
  • 360-degree Swivel Design：The Feeler Gauge Set allows you to unfold or fold them easily and carry them with you. You could disassembled into a separate feeler gauge to use by adjusting the screw.Metal fastening screws,and durable..
  • Reminder: There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, And Please don't put on the humid environment..
  • Use for：The feeler gauge is used to measure the gap size. When checking whether the measured size is qualified, this method can be used to judge, or it can be judged by the inspector according to the tightness of the feeler gauge and the measured surface. Mainly used to check the gap value between two joint surfaces..
Check Stock

K-MOTOR PERFORMANCE Spark Plug Gap Tool - 1 Set with Feeler Gauge (14mm Thread)

  • Compatible With M14 x 1.25 Threaded Spark Plugs ( 14mm M14 ).
  • Precise Gaps every time - No electrode damage.
  • Not more misfires or error codes due to the bad or inaccurate gap on your spark plugs - Designed and Assembled in California USA.
  • Package Includes: 1x Spark plug gap tool - 1x Feeler gauge.
Check Stock

Countertop Oven Gap Filler, Gap Covers for Stove and Counter,Heat Resistant and Easy-to-clean Brushed Stainless Steel, Heavy Gauge Metal Kitchen Oven Side Guards. (23.4‘’)

  • 【Heavy Gauge Metal Gap Filler】This Oven gap cover is crafted from durable, cleanable brushed stainless steel. Each filler lies flat against the countertop and the stove edge, fabulous option instead of silicone，and they as if they are part of the stove top,Ended up being a great accessory for you stove..
  • 【Minor Adjustments】The adjustable three springs of countertop gap filler make installation very easy,new range needed coverage for gap between range and counter top,functionally and aesthetically perfect..
  • 【Fabulous Option than silicane】Heat resistant and easy to clean .The “springy” tabs that provide tension are easily adjustable,no need take out as silicane cover,Stays in place when cleaning.Smart, simple design fits perfectly and snugly..
  • 【New Gap Cover Version 】These stainless steel side gap guard over the silicone ,Gives your stove that “built-in” look,they should come standard with the appliance.Easy maintenance, let the gap disappear with the metal match appearance..
  • 【Kindly Reminder】Choose the appropriate length to better cover the gap, simple hand wash or dishwasher, if you find it is not suitable, we provide free return, Please contact us for follow-up issues during usage..
Check Stock

Glarks 2 Pack Stainless Steel Feeler Gauge Set, 32 Blades 0.04-0.88 mm Dual Marked Metric and Imperial Gap Measuring Tool and 16 Blades Standard SAE and Metric Gap Width/Thickness Measuring Tool

  • ★【What You Get】: In this feeler gauge set, it include 32 blades dual marked metric and imperial gap measuring tool, 16 blades standard SAE and metric feeler gauge, they are well packed in a plastic box, easy for carry and store..
  • ★【High Quality】: All the feeler gauge are made of high quality steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust..
  • ★【Measuring Range】: 32pcs metric and imperial tool measuring range is 0.0015 Inch (0.04mm) to 0.035 Inch (0.88 mm), 16pcs standard SAE and metric feeler gauge measuring range is 0.0015 Inch 0.005 Inch(0.127) to 0.020 Inch ( 0.508 mm)..
  • ★【Easy to use】: Designed with a hole on each end, use screw for easy adjust and disassemble, from where you press the tooth gauge, you can easily rotate the blades, tools are contains a blade notch for easy blade removal, numbers are stamped clear for read..
  • ★【Wide Application】: They measure accurately and have almost no errors, will help you quickly and easily measure gap width/thickness. Suitable for designers, engineers, mechanics to measure the tappet clearances, spark plugs gaps, bearing clearances, piston ring gaps, guitars gaps, engines ....
Check Stock

Edward Tools Harden 32 Piece Feeler Gauge Set - Metric/Inch - (0.04-0.88 mm) - Thickness Gauge Measuring Tool for Spark Plug, Guitar, 3 D Printing - Metal Shims - Easy Read Numbers (1)

  • Easy to read gap measurements includes mm and Inch sizes.
  • Feeler Size for mm 0.04,0.05,0.06,0.08,0.10,0.13,0.15,0.18,0.20,0.23,0.25,0.28,0.30,0.33,0.35,0.38,0.40,0.43,0.45, 0.48,0.50,0.53,0.55,0.58,0.60,0.63,0.65,0.70,0.75,0.80,0.88+0.25mm Copper Sheet.
  • Feeler Size for Inches - 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035.
  • Multi use gap measuring tool - Works as spark plug measuring tool, guitar gap tool, metal shims, 3 D printing thickness gauge.
  • Lifetime Warranty - We guarantee this tool for life. Note - this feeler gauge comes with anti rust oil that may get on your fingers when first measuring.
Check Stock

CNRAQR Spark Plug Gap Tool - 1 Set with Feeler Gauge (14mm Thread)

  • Perfect Tool for Boosters, Great Gift for DIY Mechanics - Small, portable and solves a real problem..
  • Compatible With M14 x 1.25 Threaded Spark Plugs ( 14mm M14)..
  • Simply put the spark plug in one end and twist the knob at the other to apply smooth, even, and easy pressure to close the gap until the right measurement is found..
  • The easiest way to improve your workbench and boost engine performance - top tier auto performance is constantly evolving, our plug allows you to never have such out dated worries again while setting your spark plug gap. Just set it, forget it, and go enjoy the open road..
  • Includes 1x Spark plug gap tool - 1x Feeler Gauge..
Check Stock

StewMac Angle Gauge

  • A simple and fast way to consistently set the gap between strings and pickups.
  • Fret a string at the last fret, slide a gauge under it, and raise the pickup until the polepiece touches the gauge.
  • Made of non-magnetic brass, so it won't stick to the polepieces, making it more practical than steel rulers or feeler gauges.
  • Set of 4 gauges in the following thicknesses: 1/32", 1/16", 3/32" and 1/8".
Check Stock