Reviews Fuse Wire Wound Resitor

ASI PTF-76-10, 5 x 20 mm PCB Fuse Holder for Printed Circuit Board Mount, 15 mm Pin Spacing, No Center Pin, 10 Amp, 250V, UL (Pack of 10)

  • 【12v Inline fuse holder for standard blade fuses 】-Fuses holder kit including 12PCS 14 AWG inline fuse holders with 60PCS standard car fuses (2A,3A,5A, 7.5A)X5PCS+(10A,15A,20A,30A)X10PCS . The auto fuse size:19mm x 5mm x 18.5mm.14 Gauge Waterproof Pigtail In-line Fuse Holder can support fuses rating of 1A 2A 3A 4A 5A 7.5A 10A 15A 20A ATC/ATO blade fuse..
  • 【Good Conductivity&High-Temperature Resistance】-The Standard blade fuse holder made of tinned copper as a conductor to ensure good bending performance, refractory resistance and excellent electrical conductivity.Heavy duty 14AWG red power wire suitable for cars, trucks, Jeeps, boats，marine ATVs, UTVs, SUVs, etc. Adding circuit protection for car alarms,car recorder, GPS, dashboard camera, VCD player, etc..
  • 【waterproof rubber cap design】-This 14 Gauge heavy duty inline wiring harness with tight-fitting waterproof rubber cap,theses fuse link wire are not easy to fall off or enter water that can protect all standard blade fuse inside ,your car and electrical device from short circuit..
  • 【Inline Blade Fuse Holder Easy Installation】This 12V-DC ATC/ATO TC/ATO in line fuse holder has long enough wire loop Length.
  • automotive fuse holder loop length: 11.8 inches / 30cm.Firstly,cutting the inline....
Check Stock

MCIGICM 12 AWG Inline Fuse Holder with 30A ATC/ATO Blade Fuse 5 Pack

  • Heavy duty 12AWG wire, better protection to the circuit..
  • Wire length: 8.7 inches 12 gauge wire each side, Fuse holder dimension: 41x35x15mm.
  • Fits for 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuse..
  • The rubber cap fits on tightly to protect any standard blade fuse inside..
  • Package included 5 x fuse holder & 5 x 30A blade fuse..
Check Stock

Fuse Holder, Ardor 4 Gauge or 8 Gauge in-Line AGU Fuse Holder with 1PC 80A AGU Fuse for Car Audio Alarm Amplifier Truck Audio(AR1122N)

  • 【Quality Fuse Holder】The fuse holder made of high-quality transparent PC material has excellent dust resistance and durability, which can protect the fuse well. It is a very practical fuse holder..
  • 【Waterproof and High Temperature Resistant】The 4 gauge fuse holder will not enter water after being immersed in water for a short time, providing waterproof protection for the fuse. It can be used at a high temperature of less than 130 degrees..
  • 【Compatible Wire Specifications】Suitable for 4-gauge wire or 8-gauge wire input and output, with a compatible current rating of 80A. This fuse holder can well protect the circuit from overload and short circuit..
  • 【Multipurpose Fuse Holder】AGU fuse holder is an ideal choice for inverters, car audio amplifiers and other 80Amp current applications, escorting your electronics equipment..
  • 【You Will Get】You will get 1 fuse holder with 1 80A AGU fuse with nickel plated. The mini portable size makes the fuse holder easy to carry and store. If you have any dissatisfaction with our fuse holder, please feel free to contact us..
Check Stock

Inline Fuse Holder, Ardor 4GA or 8GA in-Line Mini ANL (AFS) Fuse Holder with 1PC 80A Fuse for Car Audio Alarm Amplifier (AR1130N)

  • 【Quality Fuse Holder】The fuse holder made of high-quality transparent PC material has excellent dust resistance and durability, which can protect the fuse well. It is a very worthable fuse holder..
  • 【Waterproof and High Temperature Resistant】The 4 gauge fuse holder will not enter water after being immersed in water for a short time, providing waterproof protection for the fuse. It can be used at a high temperature of less than 130 degrees..
  • 【Compatible Wire Specifications】Suitable for 4-gauge wire or 8-gauge wire input and output, with a compatible current rating of 80A. This fuse holder can well protect the circuit from overload and short circuit..
  • 【Multipurpose Fuse Holder】Mini ANL (AFS) fuse holder is an ideal choice for inverters, car audio amplifiers and other 80Amp current applications, escorting your electronics equipment..
  • 【You Will Get】You will get 1 fuse holder with 1 80A Mini ANL (AFS) fuse with nickel plated. The mini portable size makes the fuse holder easy to carry and store. If you have any dissatisfaction with our fuse holder, please feel free to contact us..
Check Stock

Painless Performance 70114 Cirkit Boss Heavy-Duty Auxiliary Fuses Block, 3 Ignition-Hot Circuits

  • Safe way to add electrical accessories to any vehicle.
  • This kit allows for the addition of 3 fused circuits to your already existing factory fuse block.
  • Simply mount the fuse block and relay, route the large 10-gauge wire to the battery, route the ignition wire and then route the 3 accessory circuits to the accessories needing power.
  • Main power wire is 8 feet long from fuse block.
  • Each accessory circuit has 8 feet of wire length from fuse block..
  • Provides three ignition hot circuits with a maximum total amperage handling of 70 Amps.
  • Includes: 70-amp SPST relay, Relay base/fuse block with harness, Crimp-on terminals and mounting hardware.
Check Stock

MCIGICM Fuse Holder 10 Gauge Inline Fuse Holders 10 AWG Waterproof with 40 Amp Fuse 3 Pack

  • Heavy duty 10AWG wire, better protection to the circuit..
  • Wire length: 6 inches 10 gauge wire, Fuse holder dimension: 41x35x15mm.
  • Fits for 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, 40A ATC/ATO blade fuse..
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside..
  • Package included 3 x 10 gauge fuse holder & 3 x 40A blade fuse..
Check Stock

Recoil WFH12-3 3 Pack Waterproof ATC/ATO Inline 12AWG Fuse Holder with 3pcs 15A & 3pcs 20A Fuses

  • 5x20mm Fuse Holder: 6pcs fuse holder inline screw type with 18 AWG wire, suitable for 5x20mm glass fuse..
  • 6x30mm Fuse Holder: 4pcs fuse holder inline screw type with 18 AWG wire, suitable for 6x30mm glass fuse..
  • Fuse Dimension:5x20mm/0.2x0.78in,6x30mm/0.23x1.18in,Fuse Voltage: 250V.
  • Fuse Model:5x20mm/10 kinds:0.2A 0.5A 1A 2A 3A 5A 8A 10A 12A 15A ,6x30mm/5 kinds:0.5A 1A 5A 10A 15A..
  • Package Quantity: 5x20mm Fuse Holder x 6pcs,6x30mm Fuse Holder x 4pcs,100pcs glass fuse(6x30mm Each model 10pcs,5x20mm Each model 10pcs),All glass fuses are packed in reusable boxes for easy management..
Check Stock

Blue Sea Systems 5129 Fuse ANL 200-AMP

  • Wire Gauge:- It can securely hold the fuse and use it with 1/0,2,4AWG Ring Terminals..
  • Application：These inline fuse will protect your controller, wire, and battery from overcurrent，suitable for auto car, boat ，truck audio video systems or other vehicles..
  • Material：ANL fuse made of copper alloy and gold plating on the surface, durable and reliable to use, heat resistant, melting resistance and good conductivity, clear cover and holder features transparent design, allow you to visually see the operation of the fuse, waterproof cover protect the internal fuses from water and further damage..
  • Notice：Because the fuse will be damaged during transportation, the fuse and fuse box are packed separately and can be used after simple installation after receiving the goods..
  • Package:2pcs ANL Fuse+2pcs ANL Holder+4pcs Copper Ring Terminal+4pcs Heat shrinkable tube.
Check Stock

MUYI 2 Set Mini Blade Fuse Holder 14 Gauge Waterproof Pigtail Inline Fuse Holder with 15A ATM Fuses

  • Material:copper+rubber, Fuse holder dimension:38x25x13mm.
  • In-line fuse holder for mini blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A, ideal for car truck atv boat.
  • 14 AWG thick red pigtail wire allow you to cut and splice it into any project, Wire length:30cm/12inches, Wire range:14 AWG.
  • Waterproof design, the rubber cap fits on tightly to protect any mini blade fuse inside.NOT easy to fall off or let water in..
  • Package Included: 2 X Mini Blade Fuse Holder and 2 X 15A Mini Blade Fuse.
Check Stock

10ga Fuse Holder 2 Pack MUYI Inline Fuse Holder 10 Gauge Fuse Holders 12v Waterproof Pigtail Blade Fuse Relay with 40AMP ATC Fuses

  • 10 AWG thick red pigtail wire allow you to splice it into any project..
  • Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm.
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. NOT easy to fall off or let water in..
  • Inline Fuse Holder for standard blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A,30A,40A, ideal for car truck trailer atv boat marine.
  • Package Included: 2 X Standard Blade Fuse Holder and 2 X 40Amp Standard Blade Fuse.
Check Stock