Reviews Furniture Shim Set

StewMac Acoustic Guitar Neck Shims Maple - Set of 10

  • Fitting an acoustic guitar neck into a dovetail joint is precise work - many times you need to shim a loose side of a dovetail when fitting the neck.
  • This wafer thin shim stock is well made for a clean fit, and is just large enough to create a taper or wedge.
  • Maple shim stock is a problem solver in a busy repair shop, and we found this size has a million uses around the shop—from shimming a saddle, to....
  • Each shim is a 2" x 5" rectangle, approximately 0.022" (0.55mm) thick.
Check Stock

6 Pieces Brass Strip Brass Shim Stock Assortment 1 Width x 12 Length 0.002 0.004 0.006 0.008 0.012 and 0.016 Thickness,Brass Sheet Metal Shims

  • ✔ If you happen to need some brass shim stock, you do not have to drive mile to hardware store to find these, our brass shim stock assortment with 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • ✔ Brass flat strip is made of brass material,has nice bend-ability and good processability, excellent conductivity, you can use it according to your requirement..
  • ✔ Brass strip has high strength, high hardness. It can still work well under hot condition and has good corrosion resistance..
  • ✔ Brass shim stock assortment size: 12" Length x 1" Width, 0.002", 0.004", 0.006", 0.008", 0.012" and 0.016" Thickness. Nicely polished up..
  • ✔ Brass shim stock widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
Check Stock

FASONLA Bed Risers (Set of 8) Furniture Risers Lifts Height 3", Solid Natural Wood Risers for Bed, Furniture Risers with Non-Slip Recessed Hole (Monolithic Wood, 3" Height - Dark Brown)

  • ✔️ MADE FOR STRENGTH AND DURABILITY: Our Raisers are cut from a single block of solid Oak wood. They are strong and durable enough to support the heaviest furniture in your home and can be used for a lifetime..
  • ✔️ NON-SLIP RECESSED HOLE: The 2.40” square recessed hole on top with universal fit contours designed to helps securely hold all bed or furniture feet to up 2.40 inches wide and prevents legs or wheels from slipping out of the riser..
  • ✔️ IDEAL DESIGN FOR MUTIPLE USES: HAVE 2 OPTIONS FOR INSTALLTION - OPTION 1: USED FOR LESS THAN 2.40" WIDTH OF BED/FURNITURE LEGS - OPTION 2 : USED FOR MORE THAN 2.40" WIDTH OF LEGS OR FOOTLESS BED/FURNITURE..
  • ✔️ FULL ACCESSORIES: 8 x Risers, 8 x Wooden Shim, 8 x Small Anti-Slip Pads and 8 x Big Anti-Slip Pads.
  • ✔️ GUARANTEED SATISFACTION: If you are looking for top quality wooden risers, this set of 8 furniture risers is just what you need. If unhappy with the purchase, please let us know for a free replacement or full refund, no questions asked. Click ‘Add to Cart’ now!.
Check Stock

Hot Cams DB Electrical HCSHIM02 Complete Shim Kit Compatible with/Replacement for Arctic Cat ATV DVX 400 /Honda CRF 450R CRF450X TRX 450ER TRX 450R /Kawasaki KFX 400 KFX 450R KLX 450R KX 450F/Suzuki

  • Fits: Shims in each size 2004 - 2008 Arctic Cat DVX 400 Shim Kits ATV 2006 - 2014 Honda TRX 450ER Shim Kits ATV 2004 - 2009 Honda TRX 450R Shim Kits ATV 2003 - 2006 Kawasaki KFX 400 Shim Kits ATV 2008 - 2014 Kawasaki KFX 450R Shim Kits ATV 2006 - 2009 Suzuki LT-R 450 Shim Kits ATV 2003 - 2013 Suzuki LTZ 400 Shim Kits ATV 2004 - 2013 Yamaha YFZ 450 Shim Kits ATV 2009 - 2014 Yamaha YFZ 450R Shim Kits ATV 2010 - 2011 Yamaha YFZ 450X Shim Kits ATV 68-2072, 0925-0011, 560894, HCSHIM02, 18997-00, 870967.
  • Replaces:Western Powersports 68-2072, Lemans 0925-0011, Tucker Rocky 560894, Marshall, Southern HCSHIM02, Advantage Performance 18997-00, Automatic Distributor's 870967 ".
  • 100% New aftermarket unit built to meet OEM specifications.
  • 1-year warranty protects you after your purchase.
  • Factory direct pricing with no middleman markup delivers exceptional value.
Check Stock

Allstar ALL60200 Upper Control Arm Shim, (Pack of 10)

  • Also available in . 125 thickness by ordering Allstar part 60201 (sold separately).
  • Shims allow easy adjustment of caster/camber during front end alignment.
  • Control arm shim is an upper type that is . 062 inch thick and designed for individual mounting.
Check Stock

Air Shim Bag - 3 Pack

  • Air Shim Bag – 3 PCS Pack. 3 sizes in Small, Medium, and Large, to meet a variety of work needs..
  • Air Shim Bag – A variety of purposes, including moving and adjusting the level..
  • Air Shim Bag – Allows a single installer to hold the unit in place, accurately adjust and level..
  • Air Shim Bag – Improve work efficiency and reduce unnecessary labor..
  • Air Shim Bag – ABS+TPU+420D nylon commercial grade quality, durability and performance..
Check Stock

3 Pcs Guitar Neck Shims Made of Solid Maple Protective Guitar Neck Gasket for Bolt-on Neck 0.25° 0.5° and 1°Degree Guitar Plate for Guitar and Bass Repair

  • 【 FUNCTION 】 Guitar neck shims are used to change the angle of a bolt-on guitar neck for protection purposes. The shims are carefully angled and molded from tapered maple to provide the exact angle of tilt needed without creating an air pocket, thus protecting the guitar's neck and base from wear and damage..
  • 【 PERFECTLY RESTORE YOUR GUITAR OR BASS 】 Our guitar neck shims are ideal for repairing electric guitars and basses. They are made with a highly versatile design and can be easily customized to fit your specific needs by cutting or sanding, to protect your guitar from corrosion and improper angle damage..
  • 【 MADE OF SOLID MAPLE 】 The choice of solid maple for guitar neck shims is preferred over plastic for its better resonance, stability, and ability to produce a more beautiful sound..
  • 【 HARD MAPLE SHIM SET WITH THREE TAPERS 】 A set of three hard maple shims with tapers of 0.25, 0.5, and 1 degree, each with a rectangular shape featuring rounded edges and measuring 55 mm by 75 mm. The approximate taper specifications are 0.76 mm to 0.48 mm for the 0.25-degree shim, 0.71 mm to 0.20 mm for the 0.5-degree shim, and 1.52 mm to 0.25 mm for the 1-degree shim..
  • 【 EASY TO USE 】 To ensure a quick turnaround for a common guitar repai....
Check Stock

IMPROVED 2 Piece Durable Air Wedge Bag Pump Professional Leveling Kit & Alignment Tool Inflatable Shim Bag for a Variety of Jobs. 300 LB Rating

  • DESIGN IMPROVEMENT - 300 POUND load rating ↑ Material thickness improved to 0.8mm ↑ Two side coating （interior & exterior）TUP durable material ↑ With rounded corners, stiff durable edges, smooth exterior and INTERNAL STIFFENER for easier insertion.
  • ACCESSORY IMPROVEMENT - 2 Piece free non scratch pry tool ↑ Hose lengthened to 10 inches ↑ Upgrade the 3rd generation push button air valve, thicker and more durable, precise leveling.
  • SAVE TIME，EFFORT - Work done by many people may only need one person to complete.A variety of purposes, including moving and adjusting the level of. Air regulate shim for window, cabinet, door, installations, appliances!.
  • PROTECT THE MATERIAL - Unlike other tools or wood shim, it will not damage or wear and contact the surface of the object during use..
  • SO MANY USES -- Appliances, Beams, Cabinets, Doors, Equipment, Furniture, HVAC, Plumbing, Joists, Countertop, Mantels, Bathroom Fixtures, Curtain Walls, Flanges, Windows, and more!.
Check Stock

Allstar Performance ALL60205-10 Upper Control Arm Shim, (Pack of 10)

  • One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
  • Shims allow easy adjustment of caster/camber during front end alignment.
  • Control arm shim is an upper type that is . 250 inch thick and a dual mount design for use with 6 inch bolt spacing.
Check Stock

Allstar Performance ALL60204-10 Upper Control Arm Shim, (Pack of 10)

  • One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
  • Shims allow easy adjustment of caster/camber during front end alignment.
  • Control arm shim is an upper type that is . 185 inch thick and a dual mount design for use with 6 inch bolt spacing.
Check Stock