Reviews Furniture Bolts

4 Inch Wooden Furniture Legs, Tchosuz Set of 4 Solid Wood Pyramid Sofa Legs Couch Feets with 5/16 inch Bolt & Rubber Floor Protectors & Screws, Mid-Century Furniture Replacement for DIY Ottoman Black

  • DURABLE SOLID WOOD - Tchosuz Wooden Furniture Legs are made of eco-friendly rubberwood and well finished with 2 layer black coating. Solid wood material makes the product can support more than 250lbs. With its humidity .
  • DIY FURNITURE REPLACeMENT - Raise the height of low furniture by replacing our modern furniture legs, make you easy to clean the place under the furniture.
  • Or upgrade your furniture and your home's style to a modern look in minutes, giving your furniture a restyling has never been easy or more affordable!.
  • SUCH EASY INSTALLATION - There is a full hardware kit contains 4 furniture legs with pre-installed 5/16’’ hanger bolt, 4 insert nuts, and enough screws, you only need a screwdriver to install these replacement legs within 3 mins. Each wood leg also comes with a rubber protector! Use them to protect the floor from damage to the feet, or as an additional stabilizer for your tables or chairs..
  • 5/16’’ HANGER BOLTS - Tchosuz replacement feet are pre-drilled 5/16 inch threaded bolts, which will fit most furniture. Please kindly pay attention, if our furniture legs do not fit into your old furniture attached with different bolts, please don’t worry, you can use our In....
Check Stock

11 Degree Angled Leg Mounting Plates, Furniture Leg Attachment Plates Industrial Strength T-Plate M8 Sofa Legs with Hanger Bolts,Screws,Set of 4

  • 11 DEGREE ANGLED.Strengthen/ Repair Furniture- No more wobbly legs ! This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 11 DEGREE ANGLED.Your chair woods need NOT to cut in 11 degree in order to fit the mounting plates..
  • Industrial Standard – Each T-Plate is 2" by 2" (L x W) and 1/4" deep (approx). Plates have 5/16" threaded (metric M8) attachment holes for hanger bolts ,have 4 unthreaded holes(5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
  • 4 sets pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock

Anwenk Leg Mounting Plates, Furniture Leg Attachment Plates Industrial Strength T-Plate 5/16\ (M8) Sofa Legs with Hanger Bolts,Screws,Strengthen Weak Furniture Repair Damaged Sofa Couch Seat,Set of 4

  • Strengthen/ Repair Furniture- No more wobbly legs ! This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more..
  • Industrial Standard – Each T-Plate is 2" by 2" (L x W) and 1/4" deep (approx). Plates have 5/16" threaded (Metric M8) attachment holes for hanger bolts ,have 4 unthreaded holes(5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10 hanger bolts, these plates allow you to use standard 8mm to convert to U.S. Standard Legs by simply attach these mounting brackets with the over the hole in the furniture frame..
  • 4 sets pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock

Leg Mounting Plates, 4 Sets Furniture Leg Attachment Plates, 5/16\(M8) Industrial Grade Flat Mounting T-Plates with Hanger Bolts, Screws, Strengthen Weak Furniture Repair Damaged Sofa Couch Seat

  • 【Widely Application】 The mounting plates fit most types of furniture in the market, is good helper in repairing the furniture, attaching legs to new or damaged sofas, couches, seats, ottomans and more, no more wobbly leg..
  • 【Industrial Standard】 Each T-plate is 2" x 2" and 1/4" deep (approx), plates have 5/16" threaded (Metric M8) attachment holes for hanger bolts, have 4 unthreaded holes..
  • 【Easy to Install】No need to purchase compatible hanger bolts and the screws, can be installed in a few minutes. package includes all necessary parts, 4 pcs sofa leg mounting plates, 4 pcs M8 hanger bolts, 4 pcs M8 female converters, 16 pcs screw..
  • 【Convert to U.S. Standard Legs】 If your sofa legs are pre-drilled for M10 hanger bolts, these plates allow you to use standard 8mm to convert to U.S. standard legs by simply attach these mounting brackets with the over the hole in the furniture frame..
  • 【Sturdy & Durable】The strong mounting plates is made of premium metal, can hold up the furniture well and extend the life of yourcouch, dresser, table and ottoman. if you have any question about our mounting plates, please feel free to contact us immediately..
Check Stock

14 Degree Angled Leg Mounting Plates Furniture Table Leg Attachment Plates Brackets T-Plate M8 Sofa Legs with Hanger Bolts,Converters, Screws,Full Set of 4

  • 14 DEGREE ANGLED. Strengthen/ Repair Furniture- No more wobbly legs ! This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 14 DEGREE ANGLED.Your chair woods need NOT to cut in 14 degree in order to fit the mounting plates..
  • Specification – Each T-Plate is 1.89" by 1.89" (L x W). Thickness 1.2mm. Plates have 5/16" threaded (metric 8mm/ M8) attachment holes for hanger bolts ,have 4 unthreaded holes(4.5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
  • Application- Fit most sofa chair /couches/seats/ottomans/bench/ dresser/ end table and ottoman in market. Full 4 set pack.You have everything ready for the setup.Add t....
Check Stock

Hyever Table Sofa Furniture Leg Mounting Plate with Hanger Bolts Attachment T Plate,Pack of 4

  • Good quality galvanized iron mounting plate designed for new or damaged sofa legs and couches,table,ottomans,etc.
  • Can be used repairing the sofa or other furniture when they are damaged, missed the threaded nut or the T-nuts have wiggled loose.
  • Mounting plate include hanger bolts and mounting screws. You can easy to installation and fix you furniture legs use them.
  • 2mm thickness attachment plate connect the furniture legs firm, you don't worry about them getting loose.
  • The hanger bolts can screwed into the leg of the furniture and not need the female converters screw.
Check Stock

Btibpse Furniture Legs Attachment Plates with Hanger Bolts Screws Adapters for Furniture Sofas Couches Seats

  • 4 pieces of 5/ 16 inch (M8) hanger bolts.
  • Easy to install and time saving, no need to buy hanger bolts and screws..
  • Furniture repairing replacement: this furniture leg mounting plate can attach legs to new or damaged sofas, couches, seats, ottomans, etc..
  • Furniture Leg Mounting Plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place.
  • 4 sets pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock

Btibpse Mounting Plates for Wood Furniture Legs Sofa Legs Attachment Plates with Hanger Bolts Screws Set of 4 (Black)

  • The strong metal mounting plates are made of premium metal, can hold up the furniture well, and extend the life of your bench, couch, dresser, end table, and ottoman..
  • 4 pieces of 5/ 16 inch (M8) hanger bolts,4 pieces mat..
  • Furniture Leg Mounting Plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place.
  • Furniture repairing replacement: this furniture leg mounting plate can attach legs to new or damaged sofas, couches, seats, ottomans, etc..
  • Easy to install and time saving, no need to buy hanger bolts and screws..
Check Stock

Binding Screw, PK5

  • Product Type: High Quality Stainless Steel Furniture Bolts Nuts Set..
  • Outer Diameter: 8.0mm, fit for 5/16" (8mm) Hole Dia..
  • Package Included: 10 Pairs (10 PCS Furniture Bolts and 10 PCS Barrel Nuts)..
  • Ideal Application for all kinds of DIY art, leather crafts, and clothing making..
Check Stock

Interstate Pneumatics TRB750K 2 in 1 Thread Locker Kit Includes High/Medium Strength 50ml Each Bottle

  • ...ay on 3/8” Steel (TB750): 45 in-lb, Torque Prevailing on 3/8” Steel (TB750): 100 in-lb, Size: 50ml (1.69 Fl Oz), Fixture Time: 10 min., Full Cure Temperature (°F): 77, Full Cure Time: 24 hr..
  • Recommended For: TR750 - Use on metal fasteners up to 1” (25 mm) in diameter such as bolts on decks, ready-to-assemble furniture, mounts, rings, gear bolts and frame bolts, TB750 - Use on metal fasteners 1/4" (6 mm) to 3/4" (19 mm) in diameter such as bolts on small engines, swing sets and furniture.
  • Not Recommended For: Use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials, Use on plastic parts, particularly thermoplastic materials where stress cracking of the plastic could result.
  • Volume: Bottle contains 50ml (1.69oz) To minimize spill during shipment an oversize 100 ml bottle is used..
Check Stock