Reviews Furniture Attachment

GorillaGlides 1 Inch Chair Sliders/Floor Protectors (16 Furniture Glides) Screw-On or Self-Adhesive, for Sliding on Carpet & Hard Surface Floors, Round, CB253-16

  • ...urniture legs / bottoms from damaging floor surface and great for use on carpet, tile floors, rugs, slate, timber decking, ceramic, and more (Use GorillaFelt CB257-16 or GorillaFelt CB2514 felt cap inserts to protect vinyl, laminate and wood floors).
  • SCREW ON OR SELF-STICK ATTACHMENT – Includes 16 round 1-inch plastic sliders which feature strong adhesive backings for quick attachment as well as 16 screws for more permanent attachment under chair or furniture foot.
  • 5 YEAR WARRANTY – GorillaGlides CB253-16 by Slipstick are covered by a free replacement warranty should any product fail due to premature wear or defect - Slider caps can be replaced and are sold separately (see GorillaGlides model CB254 or CB2514).
Check Stock

Slipstick Chocolate CB255 1 Inch Floor Protector Chair Glides/Furniture Slider Feet (Set of 8) Self Stick or Screw Brown, 1-Inch

  • Glides specially designed to make furniture slide effortlessly and quietly across hard surface floors and carpet.
  • Slippery smooth sliding surface of glides safely protects floors from sliding chairs or moving furniture.
  • Prevents furniture from scratching or damaging floors made of tile, laminate, ceramic, carpet and more (not recommended for protecting wood floors).
  • Ideal slider feet for kitchen chairs, dining room chairs, bar stools and furniture with straight legs 1 inch to 1. 25 inch in diameter.
  • Includes 8 slider glides that are 1 inch in diameter and screws for secure attachment or just peel and stick for instant attachment.
Check Stock

Baxton Studio Marieke King Size Ash Brown Finished Wood Headboard

  • This headboard is not pre-drilled for attachment to a bed frame.
  • To properly maintain your indoor furniture, clean it with a furniture polish bi-monthly. Spray the furniture polish onto a clean cotton cloth or rag.
  • DO NOT spray furniture polish directly onto the furniture. Wipe the furniture polish with the grain.
Check Stock

Slipstick CB190 ¾ Inch Floor Protector Chair Leg Glides/Furniture Feet Sliders (Set of 16) Self Stick or Screw On - Black

  • Attaches to bottom of chair legs or furniture feet to ease the sliding of furniture and protect flooring.
  • Glides feature super slick sliding surface for smooth and easy gliding on hard floor surfaces or carpet.
  • Ideal for kitchen chairs, dining room chairs, bar stools, and furniture with straight legs 3/4 inch to 1 inch in diameter.
  • Protects hard floor surfaces including tile, laminate, ceramic, carpet and more (not recommended for protecting wood floors).
  • Includes 16 glides and screws for permanent attachment and long lasting protection (also feature self stick adhesive attachment option).
Check Stock

GIB cleaningtool 32mm 1 1/4 inch Hardwood Floor Brush 1.25inch Vacuum Brush Multi Surface Vacuum Attachments 360 Degrees Swivel Head Hard Floor Brush 12in Wide

  • Compatibility: The inner diameter of the vacuum floor brush is 1.25 incn(32mm), fits standard size vacuum cleaner accepting 1 1/4 incn inner diameter attachment.(DON'T fit for Miele, don't fit for Dyson, don't fit for Shark or any other vacuum hose or wand accepting 1 3/8, 1 3/4 or 1 1/2 or 1 7/8 or 2 1/2 inch diameter)..
  • 360 degrees swivel neck of the shop vac brush allows easy cleaning around furniture or underneath tables while doing twists and turns. 12 inches wide span of the shop vac floor attachment covers a large area and makes your vacuuming much faster..
  • Soft and thick bristles of the shop vac floor attachment allows great suction and won't scratch your floors. And larger particle will be picked up by the open spots on the front of the brush. Adequate for wood floor and tile..
  • The vacuum floor brush attachment not only works well for cleaning the most delicate wood floor, but also great for use on leather furniture, walls, ceilings, and high areas that get cobwebs. Attach the vacuum brush replacement to your 1.22" hose or wand and gently clean your hard floor surfaces with ease!.
  • What you get: 1 x 12" wide floor brush attachment Note: Not Fit For 1 3/8, 1 3/4, 1 1/2, 1 7/8, 2 1/2 inch vacuum cleaner..
Check Stock

11 Degree Angled Leg Mounting Plates, Furniture Leg Attachment Plates Industrial Strength T-Plate M8 Sofa Legs with Hanger Bolts,Screws,Set of 4

  • 11 DEGREE ANGLED.Strengthen/ Repair Furniture- No more wobbly legs ! This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 11 DEGREE ANGLED.Your chair woods need NOT to cut in 11 degree in order to fit the mounting plates..
  • Industrial Standard – Each T-Plate is 2" by 2" (L x W) and 1/4" deep (approx). Plates have 5/16" threaded (metric M8) attachment holes for hanger bolts ,have 4 unthreaded holes(5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
  • 4 sets pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock

Anwenk Leg Mounting Plates, Furniture Leg Attachment Plates Industrial Strength T-Plate 5/16\ (M8) Sofa Legs with Hanger Bolts,Screws,Strengthen Weak Furniture Repair Damaged Sofa Couch Seat,Set of 4

  • Strengthen/ Repair Furniture- No more wobbly legs ! This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more..
  • Industrial Standard – Each T-Plate is 2" by 2" (L x W) and 1/4" deep (approx). Plates have 5/16" threaded (Metric M8) attachment holes for hanger bolts ,have 4 unthreaded holes(5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10 hanger bolts, these plates allow you to use standard 8mm to convert to U.S. Standard Legs by simply attach these mounting brackets with the over the hole in the furniture frame..
  • 4 sets pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock

Slipstick CB141 Rubber Pads, 4 Inch, Black, 6 Count

  • PRESCORED FOR MULTIPLE SIZE OPTIONS – Includes 6 square 4” rubber furniture pads each of which are pre-scored for easy cutting to multiple sizes such as 4”x4”, 3”x3”, 3”x2”, 4”x2”, 2”x1”, 1”x1”, L shapes and more (includes optional self-stick adhesive backings for a more permanent attachment to furniture).
Check Stock

Hyever 3\ Adjustable Heavy-Duty Aluminum Sofa Legs Set of 4 TV Stand/Cabinet/Furniture Adjustable Feet (Bronze)

  • Aluminum Alloy & Rubber. Heavy-Duty Furniture Legs, load-bearing up to 2,200 lbs. Great for long-term fixed furniture cabinets..
  • Furniture legs can be adjusted from 80 mm(3.2 inch) to 90mm(3.5 inch)..
  • Applicable furniture: Durable and sturdy. Bottoms installed with transparent rubber pads for non-slip and reduced noise. Ideal for kitchen furniture, TV cabinets, shelves, sofa, tea table, bed and so on..
  • Characteristics: Easy to Install, Bottom Transparent Rubber Pad Anti-slip and Noise Reduction.
  • Package included: 4 Aluminum Alloy adjustable legs come with 12 attachment screws..
Check Stock

14 Degree Angled Leg Mounting Plates Furniture Table Leg Attachment Plates Brackets T-Plate M8 Sofa Legs with Hanger Bolts,Converters, Screws,Full Set of 4

  • 14 DEGREE ANGLED. Strengthen/ Repair Furniture- No more wobbly legs ! This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 14 DEGREE ANGLED.Your chair woods need NOT to cut in 14 degree in order to fit the mounting plates..
  • Specification – Each T-Plate is 1.89" by 1.89" (L x W). Thickness 1.2mm. Plates have 5/16" threaded (metric 8mm/ M8) attachment holes for hanger bolts ,have 4 unthreaded holes(4.5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
  • Application- Fit most sofa chair /couches/seats/ottomans/bench/ dresser/ end table and ottoman in market. Full 4 set pack.You have everything ready for the setup.Add t....
Check Stock