Reviews Furnace Flue Sealant

LOCK-TOP 09505 8 in. x 17 in. Lock-Top II Chimney Cap-Damper

  • Energy Saving: Silicone Rubber Seals Chimney Tight, No Air & Water Leaks..
  • Premium Quality Damper, Made in the USA..
  • Includes: Sweeps Ring, silicone sealant, 30' stainless steel cable, and hardware set. Arrives Fully Assembled..
  • Warranty: Manufacturers Lifetime Warranty..
  • Material: Stainless steel and cast-aluminum construction, with silicone rubber gasket..
  • Fits Inside Flue Sizes: 6 x 14 to 9-1/2 x 17-1/2..
Check Stock

LZQ-7 Flowmeter 2-20LPM Acrylic Air Gas Flowmeter with Control Valve for Measuring Controlling Gas Flow

  • This gas meter is connected to hose to measure unidirectional gas flow.
  • Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure.
  • It is simple to use, and has 8mm barbs for convenient connection to hoses.
  • Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, , compressed air, argon.
  • Mainly used for detecting the flow, control flow and can be used in industry.
Check Stock

Gas Flowmeter, LZQ-7 Flowmeter 1-10LPM Flow Meter with Control Valve for Oxygen Air Gas

  • INSTRUCTIONS -- This gas meter is connected to hose to measure unidirectional gas flow.
  • MADE OF HIGH QUALITY ACRYLIC -- Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure.
  • IT IS SIMPLE TO USE -- It is simple to use, and has 8mm barbs for convenient connection to hoses.
  • MEASURABLE GAS -- Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, oxygen, compressed air, argon.
  • MAINLY USED FOR -- Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry.
Check Stock

Camping Mini Heater VSANSTAR Portable Stainless Steel Camping stove Tent Heating Cover for Outdoor Backpacking Hiking Traveling BBQ.

  • QUALIFIED MATERIAL: The mini heater is made of premium stainless steel, anti-rust, sturdy, heat-resistance and durable for long term use..
  • GOOD DESIGN:The vent design helps the furnace dissipate heat evenly, thereby obtaining a better heating effect. The groove design at the bottom can....
  • KEEP STABLE ON FLUE BOTTLE: There are four slots on the bottom, fit gas burner perfectly and stand stably on it..
  • EASY TO CARRY: Portable and lightweight, with a bag for easy carrying and storage. Suitable for outdoor camping activity..
  • HANDLE DESIGN: With a handle for taking the hot stove from fire to protect your hand from scald.
Check Stock

testo 310 I Residential Combustion Analyzer Kit I Flue Gas Detector Set for Heating Systems

  • The testo 310 co2 detector is ideal for more complex flue gas analyses, maintenance, safety checks, and furnace efficiency confirmations of residential heating systems.
  • With its advanced sensor technology, the carbon monoxide meter offers accurate readings of O2, CO2, ambient CO, draft and pressure, temperature and combustion efficiency.
  • Thanks to its rugged housing with an integrated, kink-resistant hose, the gas leak detector is securely protected from impact and leaks.
  • Equipped with a backlit display, quick-start and integrated condensation tap and magnet, the co2 monitor delivers a hands-free and easy application.
  • Includes a probe with cone, extra hoses and particulate filters as well as a pressure plug and a protective hard-shell case.
Check Stock

Tube Type Acylic Flowmeter, Air Flowmeter Oxygen Flowmeter,LZQ-5 Flowmeter 2.5-25 LPM Flow Meter with Control Valve for Oxygen/Air/Gas

  • 【FUNCTION】- This gas meter is connected to hose to measure unidirectional gas flow..
  • 【QUALITY MATERIALS 】- Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure..
  • 【EASY TO USE】- It is simple to use, and has 8mm barbs for convenient connection to hoses..
  • 【WIDE USE】- Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry.Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, oxygen, compressed air, argon, toluene, benzene, xylene, hydrogen sulfide, sulfur dioxide, ammonia, etc..
  • 【PROFESSIONAL AFTER-SALES SERVICE】- We guarantee the product is 100% brand new. Please feel free to contact us if you have any problems about our product, then we will make every effort to resolve it for you,and give you a satisfactory answer..
Check Stock

CHIMCARE Wind Directional Chimney Cap, 13\ x 13” High-Grade Stainless Steel Cap for Single Flue Tile, Downdraft Prevention, USA Made

  • TOP PERFORMANCE: Ultra-thick premium grade stainless steel with an advanced design, our Wind Directional Chimney Cap is a unique alternative to traditional fireplace weather cap - providing resistance to corrosion, bad weather and hostile flue gas..
  • ADVANCED CAP DESIGN: special design of the stainless steel cap forces wind around the top of the cap and does not let it enter the flue. It is designed to withstand high wind conditions, prevent the wind from going down your flue and causing cold downdrafts, and utilize the wind to create stronger updrafts..
  • UNMATCHED PROTECTION: It swivels to block the wind, prevents toxic smoke, twigs, leaves and other debris from entering your home and obstructing the chimney.
  • saving you money from costly repairs in the future. You can expect a better updraft the harder the wind blows..
  • SELECt YOUR SIZE: This chimney wind cap is designed to bolt onto the outside of your chimney flue tile. Measure from outside edge to outside edge - this is the size of your cap. It easily installs over a masonry clay flue tile. Wind directional chimney caps are also a common choice for factory-built metal chimneys. It will fit flue tiles up to 1” larger and 1.5” smaller than above dimensions..
Check Stock

CHIMCARE Black Galvanized Stainless Steel Chimney Cap, Powder Coated, 9” x 17” inch for Single Flue Tile, Removable Hood, USA Made…

  • 【PREMIUM MATERIAL】- Powder Coated Chimney Cap is made of the highest quality stainless steel.
  • to provide extensive durability and extended corrosion-resistance - allowing your cap to look new for over 15+ years.
  • 【UNMATCHED PROTECTION】- The fireplace chimney cap is ideal for keeping out rain, snow, leaves, debris, birds, animals etc that can cause damage to integrity of chimney, flue, and crown. Saving you money from costly repairs in the future.
  • 【EASY MOUNTING DESIGN】- designed to easily bolt-on to a masonry clay flue tile. To ensure you purchase the correct size - please see our instructions on how to measure the flue correctly from the outside edges of your flue tile. It will only fit Flue Tiles + or - 1.5” from Listed size.
  • 【SAFE & EFFICIENT】- acts as spark arrestor chimney cap, it prevents dangerous sparks from landing on your roof or nearby structures and reduces downdrafts. It has a removable hood for easy chimney cleaning.
  • 【MADE IN AMERICA】- Not all chimney caps are made the same - our caps are all custom-made here in the USA with a lifetime warranty.
Check Stock

CHIMCARE Black Galvanized Stainless Steel Chimney Cap, Powder Coated, 9” x 13” inch for Single Flue Tile, Removable Hood, USA Made…

  • PREMIUM MATERIAL: Powder Coated Fireplace Chimney Cap is made of the highest quality stainless steel.
  • to provide extensive durability and extended corrosion-resistance - allowing your cap to look new for over 15+ years..
  • UNMATCHED PROTECTION: The fireplace weather cap is ideal for keeping out rain, snow, leaves, debris, birds, animals etc that can cause damage to integrity of chimney, flue, and crown. Saving you money from costly repairs in the future..
  • EASY MOUNTING DESIGN: designed and engineered to easily bolt-on to a masonry clay flue tile. To ensure you purchase the correct size - please see our instructions on how to measure the flue correctly from the outside edges of your flue tile. It will only fit Flue Tiles + or - 1.5” from Listed size..
  • SAFE & EFFICIENT: Prevents dangerous sparks from landing on your roof or nearby structures and reduces downdrafts, causing smoke to enter the home. Fireplace chimney cap has a removable hood for easy chimney cleaning..
  • MADE IN AMERICA: Not all chimney caps are made the same - our stainless steel caps are all custom-made here in the USA with a lifetime warranty..
Check Stock

EternaBond EB-RB020-50R Roof Seal 2\ x50', Black

  • Designed & Engineered to Bolt-On to Existing Clay Flue Tile.
  • Fits a square flue size of 7 ½" x 11 ½" to 9 ½" x 13 ½".
  • Constructed of 100% 304 stainless Steel and built to withstand the toughest conditions.
  • Using slotted hex-head bolts, the unique corner mounting attachment design of a shelterpro chimney cover provides the securest possible fit to a masonry flue tile.
  • Lifetime limited warranty. Made in the USA..
Check Stock