Reviews Fully automatic Concrete Block Machine

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

5/16\-18 Double Expansion Shields (Pack of 12)

  • Zamac Zinc Alloy Concrete Anchors for Masonry Screws or Bolts.
  • Four Part design: a two-piece tubular shield, a hollow, wedge-shaped cone and a wedge-shaped nut-- brought together into a single anchor unit.
  • Used in soft masonry with machine screws or machine bolts.
  • Can also be used in harder materials, including stone, brick, concrete or block.
Check Stock

BoltHold - SP12-38 Zinc Plated Steel Asphalt Anchor (5/8\ x 12\) - with 1\ Hex Bolt & Washer - Chemical Anchors - for Installation of Sheds, Carports, Bike Racks, & More - 2000 lb Pull Rated - 6 PK

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

AMES BWRF5 Water Base High Strength Elastomeric Liquid Rubber, 5 Gallon White

  • Ames’ Block & Wall Liquid Rubber is a specially formulated blend of adhesive, high strength elastomeric, liquid rubber for waterproofing concrete walls, cinder block, and more..
  • Ames Block & Wall Liquid Rubber is an excellent coating for ICF (insulated concrete forms), metal, wood, concrete, and many other surfaces..
  • Block & Wall Liquid Rubber Waterproofer will fill cracks and crevices up to ⅛ inch. Block & Wall is thick, yet easy to apply and has up to 1800% elongation. Low odor and can be sprayed, rolled or brushed applied..
  • Ames Block & Wall Liquid Rubber is non-toxic, low odor, environmentally friendly, and made in the USA.
  • 5 Gallon, White – Ames Block & Wall is packaged in 5 gallon pails – It is high in solids and dries to a nearly impenetrable tough elastic membrane that is up to 1800% elongation to resist cracking and peeling..
Check Stock

GERYON Vacuum Sealer with Cutter and Vacuum Sealer Bag Rolls for Food Storage

  • GERYON Vacuum Sealer Machine with Built-in Roll Cutter:you can create custom-sized bags without using scissors. Fits up to 12'' width Geryon or other brand vacuum sealer bags and rolls.
  • GERYON Vacuum Bags For Great Vacuum and Seal Result: specially designed channels on both sides of each geryon bag sealer bags, which block both oxygen and moisture to maximize air removal, eliminate freezer burn. Keep the food 3-6 times longer fresh, lock freshness, flavor and nutrition inside.
  • Easy to Use and Clean: Geryon E2901-M model Food Sealer Machine have a separated design to separate the upper and lower lid, and then you can clean the sealer machine easily & safely. Compact size and lightweight design are also easy to store and move around. Geryon sealer machine with fully automatic vacuum sealing operation, soft touch digital buttons and LED indicator lights with electric plug in.
  • Food Sealer Bag Rolls Safety for Storage: 4 Mil, BPA-Free Material with it's multi-layer construction makes the bags safe and strong enough for freezing, microwaving, and simmering.
  • Fully Starter Kits: 1 x Air suction hose, 5 x Heat-seal bags (7.8"*11.8"), 1 x roll (7.8"*78"), 1 x User Manual, 1 x Vacuum Sealer Machine.
  • 2 rolls (8x16ft) , Manufacturer's Support.
Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

LSA 14 Inch Concrete Saw Diamond Blade,U Shape Carbide Tipped 14 Inch Turbo Segmented Saw Blade,for Concrete Block,Paving Brick,Reinforced Concrete

  • 【Specifications of 14 Concrete Saw Blade】 Segment height 12mm. Arbor 1 inch -25.4mm. MAX RPM 5460 r/min.The holes on core decrease weight and improve cooling,turbo blades remove the debris easily..
  • 【Diamond Sand】 The high density of emery makes the LSA 14 in. segmented diamond blade tip super hard to achieve fast cutting, smooth cut without burrs,extremely fast cutting speed..
  • 【Wet and Dry】 The LSA 14 diamond blade concrete dry cut ensures a smooth cut, while the wet cut gives you the same feeling as cutting butter to maximize cutting life while reducing the cost per cut..
  • 【Applicable Cutting Materials】Concrete block,paving brick,cured concrete,reinforced Concrete can be cut with 14 inch diamond blade stones, but not for cutting metal, plastic, glass..
  • 【Applicable Models】Hand held saw,masonry saw and walk behind saw.Premium diamond U shape teeth can less stress on the operator and machine..
Check Stock

14\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry 12mm Segment Height

  • MULTIPURPOSE - 14" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind..
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone. Not recommended for reinforced concrete and asphalt and green concrete..
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - high speed handheld saws or lightweight walk-behind saws recommended.
Check Stock

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 8.6 oz Cartridge, Gray

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
  • Formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block and unreinforced masonry..
  • PC-Concrete is excellent for filling and repairing cracks in concrete, and out-performs all caulks and hydraulic cements..
  • PC-Concrete will not come loose from any cleaned concrete surface and will hold during expansion and contraction of concrete..
  • PC-Concrete is the best solution for permanent concrete repair..
Check Stock

6 Piece Set (1", 2", 3",4",5",6") Supreme Series Diamond Core Drill Boring Bits to Cut Hard Concrete, Reinforced Concrete Brick and Block

  • 6 Piece Set (1", 2", 3",4",5",6") Supreme Series Diamond Core Drill Boring Bits to Cut Hard Concrete, Reinforced Concrete Brick and Block.
  • Cut the Hardest Materials: Hard Concrete, Cured Concrete, Reinforced Concrete, Concrete Block, Brick.
  • 17" Overall Length 14" Long Barrel Length.
  • Built for Pros who need the highest quality.
Check Stock