Reviews Fuel Hose Clamp

NEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case

  • NexADD 4Pcs Fuel Line Pliers Set Does It All★- Eliminate the problems associated with removing fuel line connectors or undo fuel lines.This set includes 4 Pcs fuel line hose pliers,a hose remover pliers, a 9'' fuel filter caliper, a hose pipe clamp clip and 80 degree disconnect pliers . You’ll save about 30 percent when you buy NexADD fuel line pliers combo kits instead of buying each tool . Just Add to Cart!.
  • Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
  • Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum openin....
Check Stock

Koehler Enterprises KEDIS220 220 Piece Hose Clamp Set in Mountable Rack , Red

  • Wide Applicability : Hose finisher clamp is apply to the flexible hose tube. This is not only a hose clamp, but also a hose connector..
  • Repeatable Use : There is a captive screw on the hose clamp, you can disassemble and install it easily, and can also be reused..
  • Suitable for fuel hose, oil hose, diesel hose, water hose and so on, perfect to apply in automotive..
  • Hex hose finisher can be reused and recycle if you do not want them to stay in the original place..
  • Package Included: 4 x Car Hose Finisher Clamp Adapter.
Check Stock

X AUTOHAUX 4pcs AN10 Hex Car Hose Finisher Flexible Rubber Pipe Clamp with Screw Band Adapter Fitting for Oil Fuel Water Tube Purple

  • HIGH QUALITY: Our auto Hose Clamp Plier is made by heavy duty carbon steel with firm grip rubber handles for fuel & coolant pipe spring line clip..
  • CAPACITY: This flexible hose clamping tool kit is with a max opening of 1-3/4 inch, which can be used on most ring-type or flat-band hose clamps for easy removal and installation..
  • LOCKING FEATURE: Locking ratchet that holds the clamp open for easy/quick installation and removal. Tips swivel to allow access in confined areas and can be used at any angle. Finger tip "position lock" makes it easy to replace the lower radiator hose..
  • WIDE APPLICATION: The long reach of these plyers allows you to work in confined and tight spaces. Our automobile hose cable clamp remover and release tools can get into those narrow spaces and get the job done with ease!.
  • EFFICIENT: Non-slip handle assure steady grip and decrease hand fatigue during use. The ratcheting action is smooth and releases when you want it to. Lock it in place and it just stays allowing you to move the hose clamp wherever you want. It is great for a backyard mechanic..
Check Stock

Hoshizaki 427443-05 Hose Clamp

  • 【NO EDGES OF SHARPNESS】-- These worm gear hose clamps have no edges of sharpness to cut into the hose, which will not hurt your hands or tubes.
  • 【PREVENT FLUID LEAKAGE】-- Item Type: Hose clamp. Spring hose clamp is perfect for attach hoses to fittings to prevent fluid from leakage.
  • 【VERY TIGHT HOSE CLAMPS】-- Carbon steel color zinc plating. These clamps are very tight, so you have no worry about fixing of the threads comes off.
  • 【HIGH QUALITY CARBON STEEL】-- Type: Elastic hose clamp. Hose clamps are made of high quality carbon steel material, which is durable for a long service life.
  • 【EASILY ADJUSTED BY SCREWDRIVER】-- Fuel hose clamp kit can be easily adjusted by a screwdriver to fit your pipes or tubes, hose clip clamps are great for indoor or outdoor operation.
Check Stock

DURATECH 6pcs Hose Clamp Pliers, Pinch Pliers, Line Clamp Pliers Set for Flexible Hoses Fuel Hoses Gas Lines Brake Hoses Radiator Hoses

  • 3 Different Sizes: This set comes with 6 red color fuel line clamps in 3 different sizes. Small 1/8-in to 5/16-in, Medium 1/2-in to 3/4-in, Large 3/4-in to 2-1/4-in..
  • Insulation Material: Our Line Clamps are made of PA6. Heat resistant reinforced nylon construction, non-conductive to ensure security. And with liquids like fuel, these help keep you safe!.
  • Wide Application: These hose clamp pliers are great for use on flexible hoses, such as brake hoses, fuel hoses, gas lines, coolant hoses, radiator hoses, lawnmower fuel gas lines and more. NOT for use on hard, reinforced, or high pressure lines..
  • Anti-Slip Handle&Safety Buckle: The grips of clamp pliers are anti-slip and provide extra comfort, easy control to reduce hand fatigue. With security card buckle, these pliers can lock into position leaving your hands free to repair..
  • Make Repairs Easier: Using hose clamp pliers helps keep the mess to a minimum. Our plastic clamp pliers close off flexible hoses while leaving them undamaged. The smooth, Special-radius jaws and rounded jaw edges can effectively prevent damage to internal hose reinforcement..
Check Stock

DASBET 9pcs Wire Long Reach Hose Clamp Pliers Set Fuel Oil Water Hose Auto Tools

  • Universal Hose Pliers Set: Includes long-reach cabled hose clamp pliers, Clic-R type collar pliers, swivel jaw band clip and spring wire clip pliers, regular and angled flat band hose clamp pliers, hose removal pliers, a dual-headed screwdriver, and a hose hook for fuel, oil, and water hose repair, removal, and replacement in car, truck, and motorcycle engines..
  • Comfortable Grip: Molded, rubberized handles for less user fatigue and more productivity.
  • Pliers feature a ratchet locking mechanism that holds clamp in an open position which saves your fingers from accidents and injuries.
  • Durable: Corrosion-resistant nickel chromium steel.
  • Long-reach hose clamp pliers with 24-inch (61cm) flexible wire cable shaft allows access to awkward angles.
  • Approximate 1.2 to 1.75-inch (3 to 4.4cm) jaw openings swivel to access hose clamps in any position (approximate 8-inch / 20.3cm overall length).
  • Package includes: 1 X Hose Clamp Plier, 1 X Swivel Jaw Spring Wire Clip Plier, 1 X Swivel Jaw Band Cliper Plier, 1 X Angled Flat Band Hose Clamp Plier, 1 X Hose Remover Plier, 1 X Click-R Collar Plier, 1 X Flat Band Hose Clamp Plier, 1 X Screwdriver, 1 X Hose Remover..
  • Portable: The hose clamp tool is housed in a hand-held blow molded plastic case with handle for easy car....
Check Stock

T-Bolt Hose Clamp Adjustable Stainless Steel Titanium Blue Clamp Diameter Ranger for 2.75\ inch（72-80mm）#4124

  • Size & Package: AN8, Included: 4 Pc x Hose Pipe Clamp.
  • Universal: Aluminum Hex AN4 clip pipe finisher, Fit for Braided Fuel Hoses / Vacuum Hose.
  • Fuel line clamp feature: anti-rust, anti-corrosion, waterproof, oil-proof. Pipe clamps are sturdy, strong and reliable.
  • Easy Installation: Design to Hex, better work with the wrench and looks more fashion and tidy appearance to your hoses with easy installation of a hose clamp.
Check Stock

CLAYTON MACHINE WORKS Firewall Mount Brake/Gas Pedal Assembly P/N TA-206-BKA1

  • Hose Clamps: These flexible pinch off pliers can lock into position leaving your hands free to repair.
  • please note that these are not for use on rigid, reinforced, or high pressure lines.
  • Multi-Use: These tools are ideal to use as coolant hose clamp pliers, fuel line clamps, brake line clamp, and even as fuel line clamp pliers.
  • Reliable Material: These hose pinch pliers kit are durable, light weight, non-conductive and rust-proof, easy to use.
  • Dimensions: The large pliers measure approximately 9.93 x 2.12 x 0.75 inches, the medium pliers measure 7.18 x 1.87 x 0.75 inches, the small pliers measure 6.12 x 1.62 x 0.62 inches.
  • What's Included: You will receive a total fo 3 hose pinch off pliers in 3 different sizes.
Check Stock

ZIPCCI Hose Clamp 25 Pack Stainless Steel Worm Gear fuel line hose clamps 16-25mm 5/8-1 inch

  • Package includes: 25 pieces 3/4 inch hose clamps..
  • Hose clamp clamping range from 16 to 25mm (5/8 to 1 inch).
  • 304 Stainless steel hose clamp provides maximum corrosion resistance to salt and most chemicals..
  • Adjustable style hose clamp for a variety of applications for marine, auto, water pipes, fuel lines, etc...
  • Use a screwdriver to tighten or loosen the screw of hose clips then adjust the size, Secures pipe clamp tightly in place..
Check Stock

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

  • 6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
  • Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock