Reviews Fuel Filler Neck Hoses

Weld on Filler Cap, KIMISS Aluminum Alloy Weld On Oil Tank Filler Neck with Cap Filler Neck 1.5'' 1 1/2'' OD for Fuel Tanks Weld In Fuel Cell Cap Weld On Fuel Cap Fuel Filler Neck Aluminum Fill Cap

  • Scope of application: Weld On Billet Caps Aluminium Weld on Filler Neck does not need to be replaced frequently, with strong practical and durable. The filled neck with cover is suitable for oil tank, fuel tank, water tank, dry tank, etc. It is a high-quality, quality-guaranteed auto parts, and Fuel Filler Neck And Cap is your best purchase choice..
  • Product function: Weld On Fill Cap Fuel Filler Neck has smooth finished design, come with a O-shaped sealing ring and a natural aluminium screw on cap. Weld on Cap meets aviation hose fitting requirements, precision m....
Check Stock

TKKEUEP Gasoline Fuel Filler Neck Hose with 4 Hose Clamps,1 1/2 inches Inside Diameter Fuel Filler Hose, Reinforced Gas tank filler hose

  • Reinforced Fuel Filler Hose: This is good quality reinforced hose with the nylon cording inside for added strength.
  • Proper Fuel Filler Hose:Temperature Range: -40 Deg. F to +212 Deg. F (-40 Deg. C to +100 Deg. C).
  • Up to maximum concentrations allowed by the EPA.
  • Plenty Long Enough：Provided the length required for the extension from the tank to the filler cap；15 7/8" Long x 1 1/2" Inside diameter fuel filler neck hose（measure your old item to assist with the new one）.
  • Easy to Install:You can easy cut this gas line fuel filler neck hose to fit your purpose(Very flexible and easy to cut with box knife).
  • Applicable :Suitable for use with fuel line, fuel hose, fuel filler neck vent hose.
Check Stock

Gas Tank Fuel Filler Neck Hose - Fits Ford Ranger 1993-1997 and Mazda B2300, B3000, B4000 1994-1997 Non - Flareside and Splash Model - Replaces F47Z9034P, AL5Z9034A, AL5Z9034C, F47Z9034, ZZM042210C

  • REPLACEMENT FUEL FILLER NECK and HOSE - Located on the side of your truck the fuel filler neck tube and hose allows you to pump gas into your truck's gas tank. If your Ford Ranger or Mazda B Series pickup is leaking gas while you're pumping gas your fuel filler neck and hose should be replaced. Also if the gas pump is constantly clicking off while pumping gas into your truck your fuel filler neck should also be replaced..
  • FITS THESE VEHICLES (108" or 125" Wheel Base) - Ford Ranger 1993, 1994, 1995, 1996, 1997 and Mazda B2300, B3000, B4000 1994, 1995, 1996, 1997 - Includes model years 93, 94, 95, 96, 97 - DOES NOT fit Flareside or Splash Models.
  • OEM FIT, QUALITY, and FINISH - This Fuel Filler Neck is a direct replacement for the factory Ford assembly. While this is NOT a genuine Ford or Mazda part it is made to the same specifications. Featuring a rugged powder coated finish, a reinforced rubber hose, and stainless steel hose clamps this filler neck will last a lifetime..
  • REPLACES OE PART#s - F47Z9034P, AL5Z9034A, AL5Z9034C, F47Z9034, ZZM042210C, 577-902 found on the Ford Ranger and Mazda B2300, B3000, & B4000 Pickup models..
  • ONE YEAR WARRANTY - If you experience any issues with the Fuel Filler Neck and Hose on your Ford Ranger or Mazda B series pickup, s....
Check Stock

Qiilu 2in Weld On Filler Cap Aluminum Alloy Weld On Filler Neck and Cap 2' Weld On Fuel Filler Neck with Cap Fuel Tank Parts Car Refitting(Black)

  • 2" Weld On Filler Cap --- This fuel filler neck and cap is suitable for welding on 2 inch inner diameter pipe interface. The weld on fuel tank filler neck and cap is easy to install, no need complicated tools, convenient and practical for using.
  • Superior Quality Aluminum Alloy --- The weld on fuel filler neck with cap is made of high‑quality aluminum alloy material, firm, anti‑rust, and durable in use. 100% brand new, please be assured of your purchase.
  • Professional Manufacturing --- The aluminum weld on filler cap has excellent mechanical stability and corrosion resistance for high reliability. Precision‑machined to exact tolerances for trouble‑free performance.
  • Size --- The cap diameter is about 58mm / 2.3in, cap height is about 15.5mm / 0.6in, overall height is about 81mm / 3.2in, bore is about 47mm/1.85in, neck outer diameter is 2in, neck thread and cap thread are M52x2.5.
  • Quality Assurance --- As a professional seller, we provide high quality products and considerate services. Every fuel filler neck must go through strict inspection to ensure reliable quality. Please rest assured to buy our products, hope you have a pleasant shopping experience.
Check Stock

ECCPP Fuel Gas Tank Filler Neck Tube Pipe XL5Z9034KB XL5Z9034DB Fuel Tank Tube Fit for 1998-2000 for Ford Ranger 1998-2000 for Mazda B2500 1998-2000 for Mazda B3000 1998-2000 for Mazda B4000

  • FITMENT- Gas fuel tank filler neck tube pipe fit for 1998 1999 2000 for Ford Ranger 1998 1999 2000 for Mazda B2500 1998 1999 2000 for Mazda B3000 1998 1999 2000 for Mazda B4000.
  • FUNCTION- The fuel gas tank filler neck pipe is made of steel with low fuel permeability, gasoline resistance and chemical resistance, which can avoid fuel leakage during refueling and ensure the normal driving of the car.
  • REMINDER- Deterioration of the fuel filler neck will cause fuel leakage, fuel pump premature failure, fuel filter and injector blockage, wire damage etc,so replace a new pipe is very necessary.
  • EASY INSTALLATION- The fuel tank filler neck with light weight ,it is easy to install with simple hand tools in just minutes.
  • ATTENTION- Please check the descriptions and compatibility chart to ensure that the replacement fits your auto before your purchasing.Please contact us if you have any question.
Check Stock

Aftermarket Kawasaki Jet Ski Gas Cap Gasket & Fuel Tank Filler Neck Kit OEM # 59231-3734/51049-3714 Black

  • New Aftermarket Kawasaki Jet Ski Gas Cap, Gasket & Fuel Tank Filler Neck Kit - Select your Gas Cap Color.
  • Compatible with Kawasaki ~ Aftermarket Replacement Part ~ Filler Neck – Does NOT have Overflow Nipple (Filler Neck with the overflow nipple is no....
  • Replacement Parts replaces the following Part Numbers: Kawasaki Fuel Filler Neck Part #: 59231-3734 59231-3716 / Kawasaki Gas Cap Part #: 51049-3714.
  • Color: Black ~ Quantity: 1 kit ~ Each Kit Includes: 1 - Black Filler Neck / 1 - Gas Cap with screw to attach chain - select your color / 1 - Rubber....
  • Aftermarket Part fits the following Years, Make & Models: Kawasaki PWC: 2003-2011 800 SX-R / 2001-2002 900 STS / 1999-2006 900 STX / 1997-1999 1100....
Check Stock

Locking Pre-vent Cap for Auxilary and Transfer tanks

  • THIS ITEM HAS BEEN REPLACeD BY THE NEW AND IMPROVED FSS 754.
  • The Flow Security Systems PRE-VENT Fuel Cap represents the latest in fuel cap technoloy. The FSS 750 pre-vent cap is designed to permit the controlled release of fuel tank pressure from volatile fuels. When removing the cap to refuel a 1/2 turn of the cap releases the fuel tank pressure before the caps sealing gasket is released from the filler neck. This feature dramatically reduces the possibility of fuel expulsion from the filler neck when the cap is removed. The FSS 750 pre-vent security cap is for use on diesel, transfer and auxilary tanks. Allows pumping of fuel at 15 gpm without removal of cap. The FSS 750 pre-vent security cap helps to maintain fuel quality by reducing condensation and evaporation loss..
  • Patented Spinsecure design prevents unauthorized access to fuel, Suitable for use on all tranfer tanks.
  • For use on all 2” female threaded tanks, Tubular lock and key with over 50,000 combinations.
  • Can be keyed alike for multiple use convenience, Has weather proof self-closing latch covering the face of the lock.
Check Stock

Frienda 2 Pieces Flexible Racing Fuel Filler Hose Clear Racing Fuel Jug Hose Utility Jug Hose Gas Can Hose for Racing Fuel Jugs LC2 Jugs Auto Fuel Filler Hose Racing Fuel Container Gas Can Fuel Tank

  • ...pieces of racing fuel jug hoses in one package in total, they come in clear.
  • The racing fuel jug hose consists of a hose and thread combination, which is easy for you to use.
  • Sufficient quantities also allow you to replace them according to actual needs.
  • Thread design: the thread design of the clear racing fuel filler hose can be well connected to the tank and the vehicle, which can avoid fuel side exposure or dripping when dumping, preventing the dust from entering the tank and keeping the tank and the vehicle clearer.
  • Easy to install: the flexible fuel hose is easy for you to use, it has a simple operation, which is a good way to save your time and energy, and increase your productivity.
  • The simple use method is also very nice for novices, you do not have to worry about trouble when you use it.
  • Reliable material: the auto fuel filler hose is made of PVC, which has the characteristic of flame retardant, reliable and quality.
  • This material is also sturdy and strong, not easy to break and has a long service time, so you can use it with confidence.
  • Multiple applications: the PVC racing fuel jug hose can be applied in a variety of scenarios, it is ideal for assisting the fuel tank in professional off-road and closed race refueling.
Check Stock

Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Offset Outlet

  • Perfect for that custom build or off-road vehicle.
  • This tank features a fuel outlet that is 3" from the end opposite the filler neck.
  • Bracket bolt holes are spaced 4" from center to center.
Check Stock

Fuel Gas Filler Door Housing Pocket w/Hinge For 2009-2014 F150, 2010-2014 Lincoln Mark LT Replaces # 9L3Z-9927936-B, 9L3Z9927936B Gas Tank Cap Door Hinge

  • A ABIGAIL Fuel Filler Door Housing Hinge Pocket allows you to open the fuel cap and put the fuel nozzle for refilling. Your original gas door housing began to malfunction after a few years and therefore it may not close properly and need to be replaced..
  • High Quality: This Fuel Filler Housing Bracket Door Hinge features a redesigned enclosure that ensures longer duration than factory components. It is a direct replacement that will fit and work excellently like the OEM part though this is not a genuine Ford or Lincoln part..
  • Application: This Fuel Door Hinge is for 2009 2010 2011 2012 2013 2014 Ford F-150, 2010-2014 Lincoln Mark LT, the gas door housing is located near the left side rear fender of your truck..
  • Interchange Part No: Replaces # 9L3Z-9927936-B, 9L3Z9927936B.
  • This gas door housing is a direct replacement for these Ford part numbers..
  • Service: 100% satisfaction guarantee, If you have any issues with the fuel neck filler housing, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock