Reviews Ftdi Basic Breakout 3v

FT231X Breakout

Save space by using this genuine FTDI FT232RL USB to serial IC breakout to program your microcontroller.
Has TX and RX LEDs that allow you to see serial traffic on the LEDs to verify the board is working.
Designed to decrease the cost of (Arduino-compatible) development and increase ease of use. Includes auto-reset feature.
The pins labeled BLK and GRN correspond to the black wire on the FTDI cable that is GND, green is DTR.
Uses a SMD 6-pin header on the bottom, which makes it smaller and more compact.

6 ft FT232 USB to TTL serial adapter 3.3V (with 6 pin 0.1” pitch female socket header) connects devices with 3.3 V logic level UART signals....
A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
6 feet FTDI USB to TTL serial cable 3V3 (6 way outputs) provides access to Tx, Rx, RTS#, CTS#, VCC (5v) and GND (power line provides 5V and data....
FTDI chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
6 pin header USB TTL UART converter cord is compatible with Windows 11, 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, MacOS, Linux 2.4 and greater.

The Adafruit ATWINC1500 WiFi Breakout uses SPI to communicate, so with about 6 wires, you can get your wired up and ready to go. Right now the Atmel-supplied library works great with Arduino M0's and M4s but does not work on Uno (328P) and may not work on other Arduinos. You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, a few seconds..
This module works with 802.11b, g, or n networks & supports WEP, WPA and WPA2 encryption. You can use it in Soft AP mode to create an ad-hoc network. For secure client connections, there is TLS 1.2 support in firmware 19.4.4!.
Since this is our new favoritest SPI-protocol WiFi module we've decided to make a little breakout for it. The breakout comes with level shifting on all the input pins so you can use it with 3V or 5V logic. A 3.3V voltage regulator that can handle the 300mA spikes lets you power from 3-5.5VDC..
There's also 3 LEDs that you can control over the SPI interface (part of the library code) or you can have controlled by the Arduino library. They'll light up when connected to an SSID, or transmitting data..

6 ft USB to TTL serial adapter (with 3 pin 0.1” pitch female header socket) connects devices with 3.3 V logic level UART signals interface to a....
A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
6 feet FTDI USB to TTL serial cable (3 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx and GND.
FTDI chipset on the PCB board has configurable internal EEPROM and 3.3V UART signals can be individually inverted by configuring the EEPROM.
3V3 TTL to USB converter cord is compatible with Windows 11, 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, Mac OS, Linux 2.4 and greater.

The TCA9548A Breakout board supports communicating with multiple I2C devices with the same address, making it easy to interface with them..
TCA9548A multiplexer features: bidirectional eight-channel I2C multiplexer, active low reset input.
The default address of this expander is 0x70, the address can be changed, and can be set within 0x70~0x77..
In the address of 0x70~0x77, 8 expanders can be cascaded, and each expander can be connected to 8 devices with the same address, so that the same I2C port can be connected to 64 devices with the same address and can be used normally..
The chip is compatible with 3V and 5V and can be used with any logic level.

Frequency Range: 136-174/400-480 MHz. FM Radio.
Comes with metallic rugged shell, more durable than previous UV-5R and UV-5RA. Cool and perfect for outdoor operation, car racing, off-road trip, emergency rescue..
Easy to program some basic settings via keypad or connect with PC. Support CHIRP and CPS. Recommend cable: Radioddity PC001 FTDI programming cable (work with latest Windows, macOS, Ubuntu systems)..
Classic UV-5R compact design, compatible with UV-5R 3800mAh extended batteries as well as other 5R series accessories..
Lightweight and versatile, full HD color LED display, exquisite and clarity..

【Application configuration】: Each LSM6DS3 Breakout has been designed to be super-flexible and can be configured specifically for many applications. With the LSM6DS3 Breakout you will be able to detect shocks, tilt, motion, taps, count steps, and even read the temperature!.
【Basic features】: The LSM6DS3 is a accelerometer and gyroscope sensor with a giant 8kb FIFO buffer and embedded processing interrupt functions, specifically targeted at the cellphone market. Due to the capabilities and low cost of the LSM6DS3 we've created this small breakout board just for you!.
【Special Note】: Please be aware that the LSM6DS3 is a 3.3V device so that powering voltages above ~ 3.6V can permanently damage the IC. A logic level change is required for any development platform operating at 5V..
【Data accuracy】: LSM6DS3 is capable of reading accelerometer data up to 6.7 kS / s and gyro data up to 1.7 kS / s for more accurate motion detection..
【Original manufacturing】: 100% of our products are made of original electronic components, please rest assured to buy and use.

Si5351A clock generator is an I2C controller clock generator. It uses the onboard clock to drive multiple PLLs and clock dividers through I2C instructions. By setting for and divider, you can make precise arbitrary frequencies..
Most importantly, we even provide excellent tutorials and libraries to help you get started! Our is designed to work for microcontrollers and IDEs, but it can be easily ported to your favorite platform through I2C support..
With the breakthrough for Adafruit's Si5351A clock generator, you will never look for another crystal! The chip has an accurate 25MHz crystal reference voltage source and internal for and frequency divider, so it can generate almost any frequency, from 003c8KHz to 150+ MHz..
There are three independent outputs, and each output can have a different frequency. Through a breadboard friendly plug or optional SMA connector, the output is 3Vpp..
Such convenient small chip is put on its own breakout board PCB, with 3.3V LDO regulator, so it can be powered by 3-5VDC. We also placed a level circuit on the I2C line, so you can safely use the chip under 3V or 5V logic..