Reviews Frost Free Pressure Relief Valve

Eastman 10 Inch Frost Free Sillcock with Vacuum Breaker, 1/2 inch MIP x 1/2 inch Sweat, Brass Plumbing Fitting, 80227

  • FROST PROOF SILLCOCK: Outside faucet valve will provide a source of water to areas of a structure that are subject to freezing.
  • ideal for use with new installation or to replace an existing sillcock.
  • FEATURES: Frost free sillcock features a large wheel handle and is equipped with a vacuum breaker that prevents backflow.
  • EASY TO INSTALL: Outdoor hose valve features a notched flange for installation on the siding for easy installation.
  • DURABLE: Outdoor spigot valve is composed of strong and sturdy brass, and is corrosion free.
  • SPECS: Freeze proof sillcocks feature a maximum pressure of 125 PSI, and a maximum temperature of 160 degrees F.
Check Stock

Watts Brass & Tubular 374A 3/4 Boiler Relief Valve

  • 1/4" male NPT 175 PSI Industrial air compressor / tank pressure safety relief valve..
  • Also known as a "Pop Off" or "Blow Off" valve..
  • This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
  • The relief pressure of this valve is set at 175 PSI and is accurate within + or - 3% of the set pressure..
  • Features a silicone rubber soft seat relief valve to prevent leaks.
Check Stock

Tool Daily Thermal Release Valve for Pressure Washer Pump, 1/4 Inch NPT, 2-Pack

  • Fitting: 1/4″ NPT. The outside diameter of male thread is 0.54 inch. Include 2 pieces pressure washer release valve..
  • Compatible with many brands, such as Generac,Homelite, Karcher, Briggs, Power Stroke, Husky, Black Max, Craftsman, Him Ore and Ridged pressure washers. Replaces Homelite part numbers 678169004, 678169002 and 678169001. Replaces Briggs and Stratton parts 208673GS, 21783GS, 194298GS and B3090GS..
  • Thermal Relief Valve protects pressure washer pumps operating in a safe temperature range to prevent overheating. When water temperature reaches above 145º F, pump seals may fail. The thermal relief valve will open to release hot water and allow cold water to enter the pump. So it continues to operate at a safe temperature. If the pump have ever overheated, the thermal relief valve must be replaced..
  • Made of brass. Max. inlet pressure of pumps is 200 PSI..
  • Quick reply within 10 hours. Any issue or question, please free to contact with us..
Check Stock

DEF Fuel Injector Common Rail Fuel Plug-1050070 for 2003-2007 Ram 2500 3500 5.9L

  • Fitment:2003-2007 Ram 2500 3500 and 5.9L Cum-mins..
  • Material:Made of Stainless Steel to avoid cracking and excessive heat.Effective anti-oxidation,anti-rust,anti-corrosion..
  • Usage:Replace the factory banjo bolt mounted on the top side of the pressure relief valve..
  • Features:Maintain fuel rail pressure during high engine load conditions.Prevent high-pressure fuel from being returned to the fuel tank.Eliminate....
  • Benefits:Weld-free construction that give fuel valve better leakproofness.Capped off completely pressure relief valve increase security..
Check Stock

EVIL ENERGY Diesel Fuel Rail Pressure Plug Valve Compatible with Dodge 5.9L Cummins 2003-2007 213072800

  • INSTALLATION SITE AND FIT- EVIL ENERGY Fuel Rail Plug replaces the factory banjo bolt mounted on the top side of the pressure relief valve.Compatible....
  • Eliminate your stock pressure relief valve with this Fuel Rail Plug, which also prevents high-pressure fuel from being returned to the fuel....
  • APPLICATION-This is for maintaining fuel rail pressure under heavy acceleration. Also prevents bleed off overnight if the stock valve is stuck open or....
  • RIGID STEEL CONSTRUCTION: Each Fuel Rail Plug is constructed of stainless steel to avoid cracking and excessive heat expansion.Effective....
  • Weld-free construction that gives Fuel Valve better leakproofness.Threads in perfectly and doesn't leak..
Check Stock

UPE Group New 1/4 ASME Brass Safety Relief Valve 140 PSI American Made Compressed air pop Off Valve

  • 1/4" male NPT 140 PSI Industrial air compressor / tank pressure safety relief valve..
  • Also known as a "Pop Off" or "Blow Off" valve..
  • This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
  • The relief pressure of this valve is set at 70 PSI and is accurate within + or - 3% of the set pressure..
  • Features a silicone rubber soft seat relief valve to prevent leaks.
Check Stock

Webstone 44443WPR-LF 3/4' IPS Isolator EXP E2 Tankless Water Heater Service Valve Kit with Clean Brass Construction

  • Lead free - meets all federal & state standards for lead levels in Drinking water system components.
  • 3/4 IPS lead free isolator EXP E2 with lead free pressure relief valve.
  • Hot and cold set tankless water heater service valve.
  • Full port brass ball valves with adjustable packing gland.
  • Hi-flow hose drains ( 500 WOG) &pressure relief valve ( 150 psi/200K BTU).
Check Stock

PPE Race Fuel Valve for 2004.5-2010 Duramax LLY/LBZ/LMM 113073000 with PPE Viton O-Ring Upgrade for PPE Race Fuel Valve

  • The PPE Race Fuel Valve (heat treated stainless steel construction) replaces stock or a shimmed pressure relief valve..
  • This valve helps maintain fuel rail pressure during high engine load conditions by completely blocking the pressure relief port (effectively eliminating fuel return to the fuel tank). It eliminates potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient PRV spring pressure..
  • Kit Includes PPE Viton O-Ring 1137073001.
Check Stock

Midline Valve 8426 Sillcock Pipe Chrome Plated Brass Body Frost 1/2 inch MIP/Sweat Connection and 3/4 inch Hose Bib Lead Free, 4

  • 4 inch long Frost free valve for 150 wwp working water pressure.
  • Connects to water supply with a 1/2 inch swt or with 1/2 inch mip connect.
  • Receives a hose with a 3/4 inch male hose threaded connect.
Check Stock

Acecare Charging Station Also Called Filling staion for Compressed air refilling

  • CONNECT. Connect compressor with valve to fill gases to tanks or pcp air guns..
  • WITH GAUGE. It is with gauge that shows the pressure in the tank or gun that receive the gases..
  • EASY TO INSTALL. It is easy to connect the valve and compressor, just very few steps..
  • WITH PRESSURE RELIEF KNOB. It is with pressure relief knob that will relief the rest pressure in hose to keep it safe when you take off it from valve..
  • WITH HOSE. The filling staion is with hose on it, and you do not need to prepare another hose when you fill gases..
Check Stock