Reviews Frequency Counter Using Arduino

EEEEE UNO R3 ATMEGA328P ATMEGA16U2 & Multi-Function Shield Starter kit (2 in 1) for Sensor WiFi Relay Bluetooth Module with Digital Display Switches with USB Cable Compatible with Arduino IDE

  • 1. Using this Ethernet shield, your for Arduino board can be used to connect to the Internet and can be used as a server or client..
  • 2. This Arduino Ethernet shield based on Wiznet W5100 Ethernet chip provides you with a way to easily get Arduino Online, because it is directly supported by the official Arduino Ethernet library..
  • 3. It adds a micro-SD card slot, which can be used to store files provided through the network..
  • It is compatible with Arduino Duemilanove (168 or 328), Uno and Mega (1280/2560) and can be accessed using the SD library..
  • 4. Wiznet W5100 provides a network (IP) stack that can support both TCP and UDP..
Check Stock

HiLetgo 5 Sets 433M Transmitter + Receiver Kit High Frequency Super Regenerative Transceiver Module for Burglar Alarm

  • Easy to use, nice range (using antenna on both), you can send strings (text) from one point to another. If you want to automate your house without....
  • Wireless Transmitter Modules allow your Arduino to wirelessly comunicate with other arduinos, or with radio frequency (RF) controlled devices that....
  • They work in pairs, meaning you need both a receiver and a transmitter to comunicate with each other.
  • Compatible with SparkFun’s 434MHz RF transmitter and RF receiver.
  • This Radio Transmitter & Receiver pair is perfectly matched to allow you to control items from a distance up to 500 feet wirelessly!.
Check Stock

Adafruit ATWINC1500 WiFi Breakout

  • Good when you want a lower-power and lower-voltage setup.
  • Same core chip in the Arduino UNO/Duemilanove/Mini/etc.
  • 95% of Arduino projects will work out of the box.
Check Stock

SunFounder Mega 2560 R3 ATmega2560-16AU Board Bundled with R3 Board and Ethernet Shield W5100 for Arduino

  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory.R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • With this Ethernet Shield, for Arduino board can be used to connect to internet. Can be used as server or client. Directly plug puzzle board, no soldering required. It is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be ....
Check Stock

ARCELI ESP-12E ESP8266 UART WiFi Wireless Shield Compatible with Arduino UNO R3

  • Standard pin interface to achieve full compatibility with the pitch Arduino Uno, Mega and so on. (Unless the standard size arduino, such as Nano, Mini).
  • 3.3V power supply using advanced chip (with the official expansion board power chip CC3000 same), so 3.3V Arduino board provided more accurate, so ESP8266 as official cc3000 chip work as normal, there is no gap..
  • It leads to a WiFi module power supply / service interface to facilitate developers to extend the power supply and maintenance..
  • Onboard ESP8266-12 stable industrial grade serial WiFi module, using an enhanced PCB antenna, signal better..
Check Stock

OCESTORE Crystal Oscillator Tester Frequency Counter Tester Meter 1Hz-50MHz Cymometer Measurement Tester Module LED DIY Kit

  • 【OPTIMAL PERFORMANCE】OCESTORE premium upgrade Frequency Counter Tester Meter based on PICmicrocontroller that can measure frequency of 1 Hz to 50 MHz,designed to measure the oscillation frequency of the most crystal oscillators..
  • 【HIGH QUALITY】OCESTORE premium Frequency Counter Tester Meter is made of high quality material which can use for a long time.Programmable addition and subtraction frequency settings, used to measure radio transceivers and other equipment..
  • 【SUPER IMPORTATNT】with crystal oscillator measurement function and programmable addition and subtraction frequency settings, five-digit digital tube display, convenient and intuitive, all use in-line components, simple circuit, easy to make..
  • 【OPTIMAL RELIABILITY】Power supply : USB 5V or DC 5-12V.
  • Crystal Test Range: about 4MHz-48MHz.Automatic range conversion, no need for manual switching.
  • All in-line components, easy to install and debug..
  • 【PACKAGE & SERVICE】Package Include: 1 Pcs x Crystal Oscillator Frequency Counter .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

FC-3000P Ham Radio CB Frequency Counter 27Mhz-3000Mhz - High Sensitivity with CTCCSS DCS Decoder for The VHF & UHF - CB Continuous Carrier Signal, Walkie-Talkies, DMR Radio Transceivers

  • ✔️ IDENTIFYING FREQUENCY - The frequency meter measures frequency parameters of the continuous carrier signal walkie-talkies , with signal strength indicator..
  • ✔️ PORTABLE FREQUENCY COUNTER - Counting continuous wave signal comes from Two-way Radio. VHF & UHF frequency measurement, useful for the CB amateur Ham Radio..
  • ✔️ FREQUENCY COUNTER METER RANGE - CB, HAm Radio, DMR frequency range 100Mhz-3000Mhz. Build-in DCS CTCSS Decoder Low PPM crystal time base used to achieve high accuracy measurement.
  • ✔️ EASY TO OPERATE - User friendly controlled with four buttons. The DMR radio frequency counter is compact and handy when needed..
  • ✔️ 100% MONEY BACK GUARANTEE 2 YEARS WARRANTY ensures this will quickly become your favorite no-risk purchase..
Check Stock

Discover It - iProtect 3 Band RF Anti-Spy Counter Surveillance Radio Frequency Bug Detector - Detect Listening Devices, Hidden Cameras, GPS, WiFi, Bluetooth, GSM, 3G, 4G/LTE, 2.4, and 5.8Ghz Signals

  • "THE DISCOVER IT - iPROTECT DD1216 - 3 BAND RF ANTI-SPY COUNTER SURVEILLANCE RADIO FREQUENCY BUG DETECTOR HAS GIVEN ME PIECE OF MIND!" - Did you know that countless families, businessmen & women and corporations have relied upon the Discover It - iProtect 3 Band RF Anti-Spy Counter Surveillance Radio Frequency Bug Detector to ensure their MAXIMUM level of privacy and security? Get ready to experience your greatest level of personal privacy yet!.
  • THREE BANDS OF DETECTION - Did you know that the detection frequency range of the Discover It - iProtect 3 Band RF Anti-Spy Counter Surveillance Detector has been split into 3 parts, each displayed by a separate bargraph: "VHF/UHF 50-700 MHz", "Mobile and wireless 700 MHz – 3 GHz" and "Microwave and wireless 3-12 GHz". Allowing the operator to understand what type of signal is detected, to detect several signals simultaneously and to sustain the ability of detection near sources of interference.
  • HAVE AMAZING PROFESSIONAL 5 STAR RESULTS WITHOUT QUESTIONING THE DETECTION RESULTS - Do you want to have amazing 5 STAR detection results each and every time you scan your home, car, office & conference board room or hotel room? Its never been easier to sweep and detect hidden bugs, hidden cameras or malicious RF sign....
Check Stock

SunFounder R3 BoardBundled with Mega 2560 R3 ATmega2560-16AU Board for Arduin

  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory..
  • R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
Check Stock

Galaxy DX-939 Backlit 40ch Mobile CB Radio with TalkBack & Roger Beep

  • Star Lite faceplate makes all lettering glow in the dark.
  • Large, easy-to-read meter with scales for power output, modulation, SWR and incoming signal.
  • Five-digit frequency counter and two-digit channel display using large blue LEDs , variable power output control, variable talkback circuit with on/off switch.
  • Automatic SWR circuit with an SWR alert LED, Roger Beep circuit with on/off switch.
  • Variable dimmer control, frequency display on/off switch, 3-position tone switch for receive.
Check Stock