Reviews Fr4 Epoxy Glass Cloth

MG Chemicals 6\ x 4\ Positive Presensitized Copper Clad Board, Single Sided, 1 oz Copper, 1/16\ Thick, FR4, cat# 606

  • This flame retardant laminate is translucent in color and made of continuous woven glass cloth impregnated with epoxy resin.
  • The copper on 1 ounce boards is 1.34mil thick (0.0341mm, 34.1 microns).
  • The boards are made of FR4 which is a flame retardant version of G-10 material.
  • Developed specifically for the circuit processing industries requirements.
  • Complies with UL #E214381 (select boards comply to UL #E213990).
Check Stock

Fiberglass Cloth 6 Ounce by 50 Inches Wide - 3 Yards - 37.5 sq/ft for Boat and Pool Repair

  • This fiberglass cloth is a flexible fabric that wets-out transparently and is well suited to a wide range of lightweight, general purpose applications including laminating, reinforcing and sheathing / waterproofing..
  • Provides Uniform Strength Horizontally and Vertically This six ounce cloth is 3.9 mils thick.
  • Compatible with Epoxy, Polyester and Vinylester Resin.
  • Often Used on Surfboards, Sailboats and Cedar StripCanoes.
  • This 6 oz. cloth is the standard “E” glass volan-finished boat cloth Style 3733.
Check Stock

Fiberglass Cloth 6 Ounce by 60 Inches Wide - 10 Yards Rolled- 150 sq/ft for Boat and Pool Repair

  • This fiberglass cloth is a flexible fabric that wets-out transparently and is well suited to a wide range of lightweight, general purpose applications including laminating, reinforcing and sheathing / waterproofing..
  • Provides Uniform Strength Horizontally and Vertically This six ounce cloth is 3.9 mils thick.
  • Compatible with Epoxy, Polyester and Vinylester Resin.
  • Often Used on Surfboards, Sailboats and Cedar Strip Canoes.
  • This 6 oz. cloth is the standard “E” glass volan-finished boat cloth Style 3733.
Check Stock

Fibreglass Plate Sheet, FR4 Glass Fiber Sheet Panel Home Epoxy Glass Craft Supplies Template Fibreglass Plate Sheet DIY Portable Glassfibre Board High Tensile and Impact Strength FR4 Epoxy Fiberglass

  • FR-4 is a thermosetting industrial laminate consisting of a continuous filament glass..
  • Epoxy Glass board is ideal for constructing many parts on your models, such as Control surface horns, servo trays, autogyro rotor plates and many general strengthening parts. For DIY handle.
  • Cloth material with an epoxy resin binder. It has characteristics of high strength..
  • Store at room temperature but also under humid or moist conditions..
Check Stock

Fibreglass Plate Sheet, FR4 Glass Fiber Sheet Panel Home Epoxy Glass Craft Supplies Template Fibreglass Plate Sheet DIY Portable Glassfibre Board High Tensile and Impact Strength FR4 Epoxy Fiberglass

  • FR-4 is a thermosetting industrial laminate consisting of a continuous filament glass..
  • Epoxy Glass board is ideal for constructing many parts on your models, such as Control surface horns, servo trays, autogyro rotor plates and many general strengthening parts. For DIY handle.
  • Cloth material with an epoxy resin binder. It has characteristics of high strength..
  • Store at room temperature but also under humid or moist conditions..
Check Stock

Bubujia 13\ Fiberglass Fabric Cloth Mesh, 6 Oz. Fiberglass Mat Material Roll Woven Roving for Tub Shower Boat Pool Repair (164 Feet)

  • This fiberglass cloth is a flexible fabric that wets-out transparently and is well suited to a wide range of lightweight, general purpose applications including laminating, reinforcing and sheathing / waterproofing..
  • Provides Uniform Strength Horizontally and Vertically This 4 ounce cloth is 0.0059” thick.
  • Compatible with Epoxy, Polyester and Vinylester Resin.
  • Often Used on Surfboards, Sailboats and Cedar Strip Canoes.
  • This 4 oz. cloth is the standard “E” glass volan-finished cloth Style 1522.
Check Stock

Electronics-Salon 1uH to 1000uH E12 Standard 37 Values Programmable Inductor Board.

  • Each value corresponds to a separate inductor, no series or in parallel..
  • Tolerance +/-10% inductors, 1uH to 1000uH total 37 values..
  • 4mm banana sockets with plugs, easy to connect wires..
  • Programmable Inductance: 1uH to 1000uH, E12 standard total 37 values..
Check Stock

Yikai Fiberglass Woven Roving Cloth (2.6 Oz, Plain Weave), 8.6\inch x 164'feet (22cm x 50m) Long for Boat & Pool Repair

  • This fiberglass cloth is a flexible fabric that wets-out transparently and is well suited to a wide range of lightweight, general purpose applications including laminating, reinforcing and sheathing / waterproofing..
  • Provides Uniform Strength Horizontally and Vertically This six ounce cloth is 3.9 mils thick.
  • Compatible with Epoxy, Polyester and Vinylester Resin.
  • Often Used on Surfboards, Sailboats and Cedar Strip Canoes.
  • This 6 oz. cloth is the standard “E” glass volan-finished boat cloth Style 3733.
Check Stock

Fiberglass Cloth Roll - Chopped Strand Mat 50' x 360' 1.5 Oz - Resin & Epoxy Compatible - E-Glass Fiber Glass Sheet CSM GRP for Molding Casting Roofing Boat Marine Repair

  • Marine grade fiberglass chopped strand mat by Nordstrand.
  • Suitable for boat building, marine repairs, roofing, insulation, casting, lining and more.
  • Can be used with epoxy, polyester or vinyl ester resin including West Systems epoxy.
  • Premium quality cloth with E-glass strands, ideal for molding and mold making.
  • The roll is 50in x 30ft with a weight of 1.5oz per square foot.
Check Stock

Purse Organzier Bag Organizer with Metal Zipper Large Beige

  • ★32 pieces double sided PCB prototype boards well packed in a plastic tray which is very easy to store and take out.
  • ★5 different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects.
  • ★4 mounting holes at the corners of the board are very convenient for installing them together..
  • ★Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects.
  • ★High quality of durable glass fiber –FR4 material with 1.6mm thickness makes a very solid and sturdy prototype circuit board.
Check Stock