Reviews Foundation Repair Shims

StewMac Neck Shims for Guitar Shaped - 6 Pack of 0.25 Degree Shims

  • Used to change the angle of a bolt-on guitar neck.
  • Made of solid maple to match the guitar neck.
  • Better than the typical homemade "guitar pick" neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck.
  • Keep these on hand for a quick turnaround on this common repair.
  • Set includes 6 (six) 0.25-degree hard maple shims.
  • this taper offers the most versatility - stacking them will let you really dial in the neck angle....
Check Stock

StewMac Bass Neck Shims for Bolt-on Necks, Made of Solid Maple, Shaped, Set of 3

  • Used to change the angle of a bolt-on bass neck.
  • Made of solid maple to match the guitar neck.
  • Better than the typical homemade "guitar pick" neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck.
  • Keep these on hand for a quick turnaround on this common repair.
  • Set includes 3 hard maple shims in the following tapers: 0.25-degree taper, 0.5-degree taper and 1-degree taper.
Check Stock

StewMac Guitar Neck Shims for Bolt-on Necks Made of Solid Maple Blank Set of 3

  • Used to change the angle of a bolt-on guitar neck.
  • Made of solid maple to match the guitar neck.
  • Better than the typical homemade "guitar pick" neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck.
  • Keep these on hand for a quick turnaround on this common repair.
  • Set includes 3 hard maple shims in the following tapers: 0.25-degree taper, 0.5-degree taper and 1-degree taper.
Check Stock

3 Pcs Guitar Neck Shims Made of Solid Maple Protective Guitar Neck Gasket for Bolt-on Neck 0.25° 0.5° and 1°Degree Guitar Plate for Guitar and Bass Repair

  • ...itar neck for protection purposes. The shims are carefully angled and molded from tapered maple to provide the exact angle of tilt needed without creating an air pocket, thus protecting the guitar's neck and base from wear and damage..
  • 【 PERFECTLY RESTORE YOUR GUITAR OR BASS 】 Our guitar neck shims are ideal for repairing electric guitars and basses. They are made with a highly versatile design and can be easily customized to fit your specific needs by cutting or sanding, to protect your guitar from corrosion and improper angle damage..
  • 【 MADE OF SOLID MAPLE 】 The choice of solid maple for guitar neck shims is preferred over plastic for its better resonance, stability, and ability to produce a more beautiful sound..
  • 【 HARD MAPLE SHIM SET WITH THREE TAPERS 】 A set of three hard maple shims with tapers of 0.25, 0.5, and 1 degree, each with a rectangular shape featuring rounded edges and measuring 55 mm by 75 mm. The approximate taper specifications are 0.76 mm to 0.48 mm for the 0.25-degree shim, 0.71 mm to 0.20 mm for the 0.5-degree shim, and 1.52 mm to 0.25 mm for the 1-degree shim..
  • 【 EASY TO USE 】 To ensure a quick turnaround for a common guitar repair, it's helpful to have quality ready-made shims on hand. Follow the steps in t....
Check Stock

Metallor Electric Guitar Neck Plate 4 Holes with Screws Compatible with Strat Tele Style Electric Guitar Bass Parts Replacement Chrome 64 x 51mm.

  • Used to change the angle of a bolt-on guitar neck.
  • Made of solid maple to match the guitar neck.
  • Better than the typical homemade "guitar pick" neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck.
  • Keep these on hand for a quick turnaround on this common repair.
  • Set includes 3 hard maple shims in the following tapers: 0.25-degree taper, 0.5-degree taper and 1-degree taper.
Check Stock

Outback Designs Guitar Neck Shims – Durable Bolt-On Neck Plate for Guitar and Bass Repair – Protective Guitar Neck Gasket made from Flexible Nylon – 0.25° 0.5° and 1°Degree Guitar Shims - Set of 3

  • HEAVY-DUTY NYLON GUITAR SHIM – Our bolt-on neck shims for guitars have been expertly crafted using high-end flexible nylon plastic. We chose this....
  • NECK PROTECTION WITH NO AIR POCKET – These guitar plate shims have been carefully angled and molded in order to provide the exact angle of tilting....
  • PERFECT FOR GUITAR REPAIR – Whether you’re installing a new sized bridge or simply repairing the neck, our guitar neck shims are designed to fit....
  • MUST HAVE FOR ANY ENTHUSIAST – Our guitar neck plates are a must have for anyone who plays their guitar often and needs parts for quick and easy....
  • SATISFACTION GUARANTEE – If for any reason you’re not 100% satisfied with your acrylic bolt-in guitar plate, simply contact our friendly customer....
Check Stock

Composite Shims (36 Pack) - Hard Composite Shims for Home Improvement - Never Rot Shims for Leveling - Restaurant Table Shims - Table Wedges - Toilet Shims - DIY Furniture Levelers - Stock Your Home

  • Proudly Made in the USA: Made of 100% recycled materials, our composite shims are great for leveling in both indoor and outdoor applications. Our stackable shims are a heavy duty solution to wooden wedges that won’t rot, warp, or crack. With 37 pre-scored lines, our composite shims are 4x easier to snap than wood. They also support more weight, allowing you to level heavy appliances, furniture, and more!.
  • Never Rot Shims: Unlike wooden shims, our composite shims are rot-proof, and resistant to decay. Our never rot shims for leveling are also weather-proof, easily holding up to rain, snow, and other harsh conditions. In fact, our composite wedges won’t split or crack due to pressure. Our shims are able to support 30% heavier loads than wood. You can be sure that our shims will last you a lifetime..
  • No Additional Cutting: Save time and energy with our pre-scored shims. Designed with 37 notches, there is no need for additional cutting or trimming with our furniture levelers. All you have to do is measure, and snap our shims to the size you need – no tools required!.
  • Multipurpose Wedges: Whether you’re a professional or are working on some home improvement projects, our shims will help you get the job done right. Use our heavy duty composite shims f....
Check Stock

Composite Shims (24 Pack) - Hard Composite Shims for Home Improvement - Never Rot Shims for Leveling - Restaurant Table Shims - Table Wedges - Toilet Shims - DIY Furniture Levelers - Stock Your Home

  • Proudly Made in the USA: Made of 100% recycled materials, our composite shims are great for leveling in both indoor and outdoor applications. Our stackable shims are a heavy duty solution to wooden wedges that won’t rot, warp, or crack. With 37 pre-scored lines, our composite shims are 4x easier to snap than wood. They also support more weight, allowing you to level heavy appliances, furniture, and more!.
  • Never Rot Shims: Unlike wooden shims, our composite shims are rot-proof, and resistant to mold & decay. Our never rot shims for leveling are also weather-proof, easily holding up to rain, snow, and other harsh conditions. In fact, our composite wedges won’t split or crack due to pressure. Our shims are able to support 30% heavier loads than wood. You can be sure that our shims will last you a lifetime..
  • No Additional Cutting: Save time and energy with our pre-scored shims. Designed with 37 notches, there is no need for additional cutting or trimming with our furniture levelers. All you have to do is measure, and snap our shims to the size you need - no tools required!.
  • Multipurpose Wedges: Whether you’re a professional or are working on some home improvement projects, our shims will help you get the job done right. Use our heavy duty composite sh....
Check Stock

12 Pieces 304 Stainless Steel Strips Stainless Steel Shim Stock Assortment 1 Width x 6 Length 0.001 0.0015 0.002 0.003 0.004 0.005 Thickness Metal Shims

  • ✔ 304 stainless steel strips are made of premium 304 stainless steel which has excellent rust & corrosion resistance performance and widely loved by people..
  • ✔ Stainless steel shims are bendable, smooth surface without burrs, can be machined or cut into various parts such as gaskets, washers, shims and spacers..
  • ✔ With 6 popular thicknesses to meet your various needs, 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005" thickness,6" length x 1" width, 2 pieces for each thickness..
  • ✔ Stainless steel shim stock widely used in all kinds of gaskets,mechanical parts,electronic components,metal stamping parts,chemical equipment,machine repair and maintenance,precision machinery,and so on..
  • ✔ Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

Pro-Grade Composite Shims for Heavy Duty Leveling. 24 pk 7.75 Inch, Never Rot, Easy Snap, Level Wedges. Water, Weather Resistant for Toilets, Doors, Windows, Sheds. Support Appliances and Furniture

  • SUPER STRONG & DURABLE COMPOSITE SHIMS: Our plastic wedge shims, made from 100% high-quality recycled materials, boast 30% more load support and pressure capacity than wooden shims. These stackable shims are perfect for all your leveling, repairs, and home improvement projects, ensuring superior durability and strength..
  • INDOOR/OUTDOOR MULTI-USE WEDGES: Our 7.75-inch composite shims cater to a variety of indoor and outdoor projects. Use these Heavy Duty Shims for leveling, plumbing, appliances, cabinets, countertops, doors, windows, furniture, decks, spas, fountains, gazebos, and mailboxes, providing unmatched versatility..
  • LIFETIME MONEY-BACK, NO NONSENSE GUARANTEE: ensuring 100% satisfaction for all your leveling needs. We stand behind our durable, high-quality shims, and if you're not completely satisfied, we promise to make it right. Trust our weather-proof, never-rot shims for a lifetime of reliable use, backed by our unwavering commitment to your satisfaction..
  • NEVER-ROT & WEATHER PROOF SHIMS: Our Never Rot shim levelers are waterproof and decay-resistant. Unlike wooden shims, these plastic shims won'....
Check Stock