Reviews Forming Abs Plastic With Heat Gun

Mini Hot Air Gun, 300W Portable Heat Gun for Embossing Shrink Wrapping Paint Drying Crafts

  • Product dimension: 9-in x 1.7-in. The wire length of the heat shrink gun is 39-in. Built in a heat sink makes the internal temperature of the hot air gun is reduced and life is prolonged..
  • Material: the mini heat gun is made of high-quality ABS plastic exterior and stainless steel inside, portable, simple and durable..
  • Function: the portable hot air gun heats up in seconds and quickly gets hot temperature up to 200°C/390°F. Please DO NOT make it work more than 8 minutes in one time, also please DO NOT get too close to the material..
  • Application: NEX heat shrink gun Comes with an additional replaceable protecting cap, it's great for rubber stamp, embossed powder, heat shrinkable film, heat shrink tubings and drying paint, etc..
  • Customer First: any issue about the product, please do not hesitate to reach out to us, we will be glad to assist you!.
Check Stock

Single Large Boat Shrink Wrap Kit - Heat Gun, Tools & Accessories - Includes Shrinkfast 998

  • Quality Material: The hot air gun is made of high quality stainless steel inside and ABS plastic outside, heat resistance, lightweight, simple and durable..
  • Easy to Use: When using the heat gun, just press the button to open it, keep the nozzle 5-6cm distance from your items and better to heat it at about a 45 degree angle until completed. The temperature can not be adjusted, but it can reach to about 200°C/392°F in few seconds..
  • Unique Design: The heating gun handing part is made with ergonomic non-slip design that ensure safe hand holding with small energizing. The heat vents of heat gun tail can decreased the internal high temperature and extend the life. Safe Heat Dissipation..
  • Multi Occasion Usage: The mini heat gun can be used for heating shrinkable film, clay, embossed powder, rubber stamp, remove old painting, heat to shrink film, defrost and remove mud and dirt etc. Built-in stand for self-support and table top use..
  • Good Gifts: If you are a DIY fan, this heat air gun could be a good tool for you. It can be used for making handmade candle, rubber stamp and so on. Note: P....
Check Stock

SEEKONE Heat Gun 1800W Heavy Duty Hot Air Gun Kit Dual Temperature Settings 752℉&1112℉ Overload Protection with 4 Nozzles for Crafts Shrinking PVC Stripping Paint

  • ★【Strong Power With 2 Modes】 1800W heat gun provides strong power to quickly heat up in seconds and can generate enough hot air for almost any....
  • ★【Fire-resistant material &Overload Protection】Heat gun is made of high-quality ABS plastic shell and stainless steel air outlet, which are....
  • ★【Hands-Free & Convenient to Use】The Integrated hands-free design allows the heat gun to run stably on the workbench, freeing hands to complete....
  • ★【4 Versatile Accessories & Wide Applications】Heater Gun comes with 4 multi-purpose nozzles. Attachments meet different application needs. Great....
  • ★【100% Satisfaction Guarantee】 Noted that the heat gun will emit white smoke in a short time after the first time starting up, which is a normal....
Check Stock

Cordless Heat Gun, Uaoaii 21V Hot Air Gun w/ 2x 4.0Ah Rechargeable Battery, 4 Nozzle, Led Light & Suitcase, 2-Temp Setting Max 1022°F(550°C) Heat Gun for Crafts, Shrink Tubing, Resin & Decorating

  • ...your soldering gun and circuitry and its lock-off switch is also designed to ensure the heat gun not be activated accidentally. Designed with a lock-on Button, after activated, press the Button to keep the Heat gun running, truly free your hands..
  • ✔️Ergonomic & Durable Design: The heat gun housing is made of ABS plastic, and its stainless steel air outlet, oxidation heating wire, fan and all-copper motor are resistant to high temperature and corrosion, greatly extending its service life. ergonomics design can prevent repetitive strain injury and improve the comfort of use..
  • ✔️Four Nozzles & Suitcase: Four different types of nozzles can control airflow and concentrate heat to specific areas, greatly improving the practicality of heat fans. Ideal for paint removable, crafts,shrink wrapping,epoxy resin,thawing pipes,electronic repair,loosening rusted bolts bending plastic and much more. The included suitcase makes it easy to pack up the Heat Gun and all its accessories and take them out to work..
Check Stock

WeldingCity 2-pk Gas Nozzle 21-50-F (Flush Tip) 1/2\ for Lincoln Magnum 100L and Tweco Mini/#1 MIG Welding Guns

  • 【Craftsmanship】 The welding gun nozzles are processed by exquisite craftsmanship, and the surface is fine and smooth, and the high-quality speed welding nozzle is more practical..
  • 【316 Stainless Steel】 Comparing to other material plastic welding nozzle, such as 304 stainless steel, 316 stainless steel is higher grade and better for rusting resistance, corrosion resistance, strength, welding, and heat resistance..
  • 【Performance】 The nozzle has stable performance, is not easy to oxidize and deform, has strong high temperature tolerance, is not easy to be polluted, and has a long service life..
  • 【What Do You Use the Welding Kits In】 Arc Welding nozzles and tips are suitable for hot air hand tools such as hot air welders, heat guns. Good replacement nozzle for vinyl heat gun..
  • 【Widly Applications】 This hot air welding gun nozzles can be used to weld ABS, PE, PP, PVC and other plastic plates, professional and practical. Suitable for a wide range of work including plastic fabrication, plastic welding, civil engineering, geomembrane, bumper repairing, roofing and vinyl floor welding etc..
Check Stock

Duco ABS Plastic Sheet 1/4 Inch Thick 12' x 12' - Two-Sided Rigid ABS Sheet (Textured Plastic Front & Smooth Back) - DIY Home Decor and Robotics Competitions Use - Black Plastic Sheet (Pack of 1)

  • ...hdpe, hdu, and pvc, ABS plastic sheeting is a great and more economical solution for heavy-duty applications..
  • MOLDABLE – Each sheet acts as a moldable plastic that hardens, making it perfect for any thermoform, shrink or vacuform project. Duco’s packs of ABS sheets are malleable in other ways through molding or forming via vacuum or shrink techniques..
  • DUAL-SIDED – The 6mm thick ABS plastic sheet black has two sides with one hosting a thin haircell pattern and the alternative side hosting a smooth material pane..
  • MULTI-PURPOSE – With Duco’s ABS plastic sheets, the possibilities are endless! Use these for projects inside or outside on a car dashboard or dash install, different types of repair, thermoplastic wall, heat resistant projects, fit a car audio frame, and many other DIY crafts..
  • MADE IN THE USA – Duco Plastics & Supply square paneling boards are all proudly made in the USA with high grade material that is lightweight in density, similar to plexiglass acrylic sheets and host a 1/8″ tolerance. Duco is the place for all of your formable plastic, acetal delrin rod, corrugated plastic sheet and closure strip essentials..
Check Stock

Duco ABS Plastic Sheet 1/8 Inch Thick 12' x 24' - Two-Sided Rigid ABS Sheet (Textured Plastic Front & Smooth Back) - DIY Home Decor and Robotics Competitions Use - Black Plastic Sheet (Pack of 1)

  • ...hdpe, hdu, and pvc, ABS plastic sheeting is a great and more economical solution for heavy-duty applications..
  • MOLDABLE – Each sheet acts as a moldable plastic that hardens, making it perfect for any thermoform, shrink or vacuform project. Duco’s packs of ABS sheets are malleable in other ways through molding or forming via vacuum or shrink techniques..
  • DUAL-SIDED – The 3mm thick ABS plastic sheet black has two sides with one hosting a thin haircell pattern and the alternative side hosting a smooth material pane..
  • MULTI-PURPOSE – With Duco’s ABS plastic sheets, the possibilities are endless! Use these for projects inside or outside on a car dashboard or dash install, different types of repair, thermoplastic wall, heat resistant projects, fit a car audio frame, and many other DIY crafts..
  • MADE IN THE USA – Duco Plastics & Supply square paneling boards are all proudly made in the USA with high grade material that is lightweight in density, similar to plexiglass acrylic sheets and hosts a 1/8″ tolerance. Duco is the place for all of your formable plastic, acetal delrin rod, corrugated plastic sheet and closure strip essentials..
Check Stock

Mini Heat Gun for Crafts, 2000W Hot Air Gun Kit with Variable Temperature Control 50℃ - 650℃, 4 Nozzles for Crafts, Fast Heating for DIY, Shrink PVC Tubing, Wrapping, Paint Removing, Epoxy Resin

  • ▶【Powerful 2000W Heat Gun】Different jobs need different temperatures. Heat Gun has 2 airflow speeds, ideal for DIY restoration, paint stripping, heating PVC, bending copper pipes..
  • ▶ 【 2 Modes Operating Temperatures】 Ⅰ：50 ℃-400 ℃, 200L/min-300L/min.
  • Ⅱ：50 ℃-650 ℃, 350L/min-500L/min. Heat gun provides strong power quickly heat up to 650℃ in 35 seconds..
  • ▶ 【4 Types of Nozzles】 ① Large concentrator nozzles.
  • It is suitable for any work scene and meets all DIY needs of the family..
  • ▶ 【High-Temperature Resistant】Heat Gun is made of ABS plastic, heat-resistant nylon, cold-rolled steel pipe. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 50℃ to 650℃..
  • ▶【Overload Protection】Our heat gun also possess overload protector to avoid damaging your heat gun and circuit. Wide application for crafts, paint stripping, skirting board covers, shrink and vinyl wrapping, cell phone repair, rusted bolt removal..
Check Stock

Mini Heat Gun,350W 662℉ (350℃) Dual Temp Hot Air Gun Tool for Craft Embossing,Shrink Wrapping,Stripping Paint,Vinyl Wrap,Candle Making,Sublimation,Phone Repair & DIY,Epoxy Resin,6.56 FT Long cable

  • ☆ Variable Speed & Heat：Its simple pencil-like design features dualhigh (662F/350℃) and low (392F/200℃) temperature settings with a concentration nozzle to meet the needs of a variety of projects.The heat vents of mini heat gun tail can decreased the internal high temp and extend the life.
  • ☆ Versatile Application：Small craft heat gun for resin,embossing powders,shrink wrap,vinyl wrap,decals,jewelry making,candle making,sublimation tumblers,ceramics,bubble busting.
  • ☆ Efficient and durable：Fast heating！6.56 FT Long cable！Make your work efficient and convenient.The mini heat gun made of high quality ABS plastic outside and stainless steel inside,lightweight,simple and durable.
  • ☆ Centralized Heating：The mini hot air gun is especially ideal for getting into hard-to-reach places and concentrating high heat on the tight area.Retractable bracket lets this heat shrink gun stand on the table stably and use it hands-free.
  • ☆ What You Will Get：1 x 350W mini heat gun,1 x Reflector Nozzle,1 x User Manual,40 x Heat-Shrinkable Tubes,If for any reason you're dissatisfied,contact our customer care team and we'll make things right.
Check Stock

Heat Gun Variable Temperature, Yome 1800W 140℉~1112℉（60℃- 600℃） Hot Air Gun with 2 Speed-Setting, Overload Protection, 4 Nozzle Attachments for Shrink Wrapping, Crafts, Cell Phone Repairs, Orange

  • ...gun with strong power can rapidly heat from 140 ℉ (60 ℃) to temperature of 1112 ℉ (600 ℃). The heat gun has 2 wind speed modes and variable temperature control dial: 1: 140℉-752℉ (60℃-400℃), 300L/min. 2: 140℉-1112℉(60℃-600℃), 500L/min..
  • 【MATERIAL & DESIGN】The heat gun is made of ABS plastic, heat-resistant nylon and stainless steel. It is sturdy and durable and weighs only 2.25 pounds. The heat gun is designed with an Ergonomic handle and side bar to prevent accidental touch, with built-in overload protection to ensure safety during use, support the hands free use..
  • 【PAY ATTENTION TO COOLING】After each use of the hot air gun, be sure to cool the nozzle. Be aware of scalding caused by the high temperature of the nozzle. We designed the brace and handing ring for easy cooling and storage.
  • 【WIDE APPLICATION】7 multi-purpose attachments are perfect for shrink and vinyl wrapping, crafts, cell phone repair, paint stripping, rusted bolts removing, frozen pipes heating, heat-shrink PVC tubing, floor tiles replacing, and grill or BBQ preparing..
  • 【AFTER-SALE SERVICE】Within 30 days after you purchase it, if you received a heat gun with damages or which does not help you to finish your work, we’d like to send a f....
Check Stock