Reviews Fork Joint

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit CV Axle Removal Tool Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • ⚒️ Quick to Remove CV Axle ⚒️ - With this CV axle removal tool the axle assembly is popped out of trans axle, and install the new axle,not need spend a lot of effort. Without damage to transmission case or inside roller bearing..
  • ⚒️ Perfect Joint Fork ⚒️ - This slide hammer puller set includes opening 63mm and 48mm CV joint fork disassembly adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use..
  • ⚒️ Heavy Duty ⚒️ -This slide hammer weighs 10.5 pounds and is 19.5 inches long, which is larger than the normal ones. So it has enough length to slide to generate more force, easier to use and work better.The hammer and VC joint fork are made of heavy-duty steel, durable and not easy to break..
  • ⚒️ Easy to Use ⚒️ - You need to attach the inner CV axle puller to your axle slide hammer, then place the adapter around the axle after the inner start. Slide the 10 lb. hammer weight back and forth to create torque and pull out the axle. Note: you can use....
Check Stock

OEMTOOLS 25202 Ball Joint Separator, 15/16 Inch Pickle Fork Tool, Heavy Duty Steel Tie Rod Removal Tool, Ball Joint Removal Tool, And Joint Splitter

  • Pickle Fork Separator Tool: The tapered fork wedge design of this ball joint separator tool focuses on the fundamentals of machine technology for an easy and uncomplicated process.
  • Precision Performance: Striking the handle with a hammer separates the ball joint cleanly.
  • Designed with a 15/16 inch opening for a firm hold and secure removal.
  • Hardened Steel: The heat treated steel alloy construction of this ball joint separator stands up to tough jobs.
  • Zinc plating resists rust and extends service life.
  • Thoughtful Design: Ball joint separator handle features a nonslip knurled texture.
  • Used as designed, this front end service tool will stand up to years of use.
  • Versatile Uses: This universal ball joint separator can be used for a variety of repairs.
  • For example, the ball joint tool can also be used on CV drive shafts.
Check Stock

ATPEAM 5-Piece Ball Joint Separator Set | Pickle Fork Tool Set | Tie Rod Removal Tool Set | 1-1/8", 15/16", 11/16", for Cars and Light Vans

  • A Complete Ball Joint Separator Set: Five different SAE standard pieces. Forks are designed to interchange with either of the handles, making it easy to remove standard-size ball joints, tie rods, and pitman arms from a variety of cars and light trucks..
  • Premium Quality: The 40# steel used in these premium tie rod removers has been forged and heat treated for greater strength and durability, and chrome-plated surfaces protects them from corrosion, extending their service life..
  • Knurled Handles Design: The knurled handles of these pitman arms separators provide sure grip for complete control of your work without slippage, and protect tool threads to extend tool lifetime and provide technician comfort..
  • The set includes: (1) Track rod fork 11/16”.
  • (4) 7-7⁄8 knurled striking handle for use with conventional hammers.
  • (5) 6-31⁄32" adapter handle for use with air hammer..
  • Blow Mold Case: The ball joint separator set is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great f....
Check Stock

OEMTOOLS 37201 Tie Rod/Ball Joint Separator Set, 5 Piece, Replace Tie Rod, Separate Ball Joints and Pitman Arms, Pickle Fork, Ball Joint Removal Tool

  • SPEED UP REMOVAL PROCESS: Pickle fork tool set quickly separates tough-to-reach ball joints during tie rod replacement or maintenance.
  • CORRECT WHEEL ALIGNMENT: Eliminate uneven tire wear, handling problems, steering wheel wandering, and vibration with confidence using the tie rod and ball joint separator tool.
  • Return smooth steering back to working order.
  • BUILT FOR LONGEVITY: The ball joint remover tool has a rust-resistant finish and features knurled handle for a no-slip tight grip.
  • Pickle forks are perfect professional auto mechanics’ tools for difficult and heavy-duty applications.
  • WIDE VARIETY OF OPTIONS: The ball joint pickle fork set includes five different sizes: 11 inch x 1-1/8 inch, 11-3/4 inch x 1-5/8 inch, 11-5/8 inch x 1-7/16 inch, 16 inch x 11/16 inch, 16 in x 15/16 inch.
  • EASY ORGANIZATION: Tie rod removal tool set includes a sturdy blow-molded case for neat organization and rapid identification.
  • Tie rod tool set is easily transportable.
Check Stock

OEMTOOLS 25112 Ball Joint Separator for Cars, Trucks, and SUVs, Ball Joint Removal Tool, Adjustable Ball Joint Puller Extends Up to 2 3/8 Inches

  • For Cars, Trucks, and SUVs: Efficiently separates the ball joint from the spindle support arm on most newer domestic and import front wheel drive vehicles, including trucks and SUVs.
  • Extended Range: In order to fit the variety of vehicles this near universal tool can service, it adjusts up to 2 3/8 inches for various ball joints.
  • Designed With Care: This ball joint splitter tool carries less risk of damaging the boot than a pickle fork joint remover and a hammer.
  • Low Profile: Give yourself plenty of room to work.
  • This ball joint separator is designed to access tight access where most ball joint separators won’t fit.
  • Easy to Use: This ball joint removing tool is designed to be the easiest means to replace top of the line ball joints.
  • Simply twist the removable nut until the joint pops out.
Check Stock

Topeak XC1 & XC11 One set for 29\ Wheel Defender

  • front and rear fenders offer excellent coverage and easy adjustability.
  • attachment (front) - two pieces qr bolt-on fork attachment fits 36 - 48.5 mm fork legs (xc1).
  • attachment (rear) - qr slip joint clamp fits 25.4 - 34.9 mm seat posts (xc11).
  • adjustable - multiple angles adjustable (xc11).
  • material - two tone injected high impact resistant plastic.Sport type: Cycling.
Check Stock

10lb Heavy Duty Inner CV Axle Removal Tool for FWD Vehicles Front Wheel Drive Axle Half Shaft Removal Tool,CATUDIY Inner CV Joint Puller Tool & Slide Hammer Puller Set with 48&63MM Joint Fork Adapters

  • Useful CV Axle Puller: To replace or repair the CV axle joints easily, use this slide hammer kit. The CV joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components.
  • Efficient Front Wheel Drive Axle Puller Set: Efficient & Heavy-Duty: Our 10.5 lb curved slide hammers are heavier and larger, and the length of 19.5 inches ensures sufficient length slide to generate more force(so the generated pulling force is also twice than normal 5lb slide hammer). Save efforts and works more efficiently.
  • Combination Kit Fits All Needs: The CV axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. All you need to remove CV axle or half shaft are put in this easy-carrying plastic case.
  • Superior Material: Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Slide hammer and the VC join fork is made of high quality heavy steel materials w....
Check Stock

Neiko 20687A Ball Joint Separator Tie Rod End Remover Pickle Fork Set | 5 Piece | Automotive Specialty Tool

  • [APPLICATION]: The ball joint separator is used for separating the ball joint from the spindle support arm on front wheel drive vehicles, both domestic and import..
  • [QUALITY]: This set comes with a one piece alloy steel construction that ensures durability and strength to withstand the heavy duty hammering force transferred to automotive attachments in your home garage or work..
  • [DESIGN]: The knurled handle creates a strong, tight, controlled, and well-placed grip when handling the separator on oil and greasy surfaces in automotive work and allows for precision and accuracy in its application..
  • [DURABLE]: The heat-treated tapered fork smoothly separates ball joints and slips in between the ball and housing, which makes it easy for maintenance tasks and automotive repairs on most car vehicles..
  • [VERSATILE]: The pickle fork tool in this automotive collection varies and comes in 5 sizes, making it usable for a variety of pitman arms, ball joints, and tie rods of automobiles including cars, trucks, and SUVs..
Check Stock

DPTOOL Ball Joint Separator Kit Heavy Duty Control Arms Steering Knuckles Tie Rod Ends Remover Tool 22mm 24mm 27mm 31mm 36mm Compatible with BMW/Benz/Land Rover

  • Application: Compatible with BMW E38, E39, E52, E60, E61, E70, E83, E90, E91, E92, R50, R52, R53, RR1, RR2, X5. compatible with Mercedes W211, W219, W220, and W230. Compatible with Porsche 996 Carrera. Compatible with Audi A4, A6 lower suspension ball joint.
  • Efficient Removal Ball Joint: Specially for quick and easy removing the ball joint connections, removal of tie rod ends, steering knuckles, and lower control arms to replace a ball joint. If you are doing any type of suspension work, this is a essential too. It makes separating ball joints as easy as a snap.
  • Not Damage Ball Joint Boot : Use this tool instead of the pickle fork. This tool is quieter, takes less effort, and most important of all, it does not damage the ball join boot. A must have if you are working on the suspension and have to separate the ball joint but are not planning on replacing it.
  • Easy To Use: lubricated the threads on this separator and applied turns slowly to the driver screw. the ball joint will violently popped out of the steering knuckle.
Check Stock

DURATECH 5-Piece Ball Joint Separator Set Pickle Fork Tool Set Tie Rod Removal Tool Set 1-1/8 15/16 11/16 for Cars and Light Vans with Suitcase

  • This is a complete set of coverage, including five different SAE standard pieces. Forks are designed to interchange with either of the handles, making....
  • The 40# steel used in these premium tie rod removers has been forged and heat treated for greater strength and durability, and chrome-plated surfaces....
  • The knurled handles of these pitman arms separators provide sure grip for complete control of your work without slippage, and protect tool threads to....
  • The set includes: (1) Track rod fork 11/16”.
  • (4) 7-7⁄8 knurled striking handle for use....
  • Tie rod removal tool set includes a sturdy blow-molded case for neat organization and rapid identification..
Check Stock