Reviews Forging Valve Shaft

3000 psi Pressure Washer Pump for Excell Devilbiss XC2800 XR2750 XR2750-01 New

  • BRAND NEW OEM PRESSURE WASHER PUMP FOR 2800-3000 PSI UNITS.
  • Specs:2800-3000 PSI / 2.4 GPM – MAX 2.5 GPM FACTORY RATING, BRASS HEAD PUMP, INCLUDES THERMAL RELEASE VALVE, Chemical Injector. FITS 3/4″ SHAFT HOLE DISTANCES ARE 2 5/8″ CENTER TO CENTER ON OUTER HOLES / 1 7/8″ FROM CENTER SHAFT HOLE TO EACH OUTER HOLE..
  • **Fits Honda Excell units with 3/4″ shaft only!!! Some Excell units have the 7/8″ shaft and this pump will not work!**.
  • UNIVERSAL PUMP – FITS MANY MAKES AND MODELS! INCLUDES THERMAL RELEASE VALVE.
Check Stock

Double Burner Propane Forge Oval Knife Making Blacksmith Gas Forge Farrier Furnace

  • Double Burner Propane Forge with 2600 Degree Capacity, With the efficient Burner mechanism that gives out neutral flame.
  • Voluminous: Simple yet effective design leaves you with ample space even after insulation to carry out forging conveniently. Forge Internal Dimension measures 4.4” (H) x 6.3” (W) x 18” (L)..
  • Our Universal Gas Pressure Regulator connection fit for these countries: UNITED STATES, CANADA, AUSTRALIA, NORWAY, SWEDEN, NEW ZEALAND, FINLAND, and ISRAEL..
  • Portable & Compact: If required this forge is easy to move around from one place to another and also it won’t occupy much of your space..
  • Balance Right Temperature: The Air Intake Valve in the Burner and Regulator allows you the control the flow of air & gas and helps you to get to the right temperature for forging.
Check Stock

R22 R134a R12 A/c Hvac Valve Core Removal Tool with Dual Size Sae 1/4 & 5/16 Port, R410 R32 Brass Adapter, 20 Pieces Valve Cores and 10 Pieces Brass Nut Hvac Valve Core Removal Installer Tool Kit

  • What you can get: this package includes 1 piece of R134A valve core remover, 1 piece of R410 R32 brass adapter, 20 pieces of valve cores and 10 pieces of brass nuts.
  • Please check: if it is screwing tightly at the top along the removal shaft allowing refrigerant to spray out along shaft, if no, please screw it tightly and tightly by yourself.
  • If the sealing ring at the top of removal shaft allowing refrigerant and the spray out along shaft is missing, if sealing ring missing, please contact us.
  • Easy to install: the core grabber tool makes it easy to insert it into the inner valve, so you can control the core, needn’t to stop the machine or release the refrigerant, you can remove and install the valve cores conveniently.
  • Suitable for: the dual size size 1/4 and 5/16 can be adapted to R22/ R134A/ R410/ R32/ R12 air-condition,and there is external bypass port design, which can remove the valve cores.
  • Durable material: the valve core remover installer tools are made of brass, which is durable and won’t rust easily, and the metal knobs are in anti-slip design, which is durable and you can use them for a long time.
  • Main structure: there is ball value handle, metal cap, core grabber tool built-in magnet at part of bottom base, make it easy for you to use, sa....
Check Stock

3/4 Inch IPS Isolator Tankless Water Heater Service Valve Kit with Pressure Relief Valve, Clean Brass, 3/4 Inch Service Installation Valve for rheem,rinai,ecosmart,navien,noritz,takagi,bosch.

  • ...EAD FREE Certification】: The components are certified lead free. Meets all federal & state standards for lead levels in drinking water system components. You can also find the CSA certification on the pressure relief valve to prove its authenticity..
  • 【Excellent Integrated Design】: Thickened brass body, gravity forging, one-piece forged brass body can effectively prevent any leakage or dripping, the main isolation valve group has passed a leak-free test before leaving the factory ,and can be used for a long time..
  • 【Quality Commitment】: 100% full refund. If you don't like the product or it is not the product you want, please don't rush to leave a review, contact us as soon as possible, and we will process a return or a full refund for you. Your satisfaction is our greatest pursuit..
Check Stock

Weber 66754 Set of 2 Lighted Main Burner Control Knobs for Genesis II LX (Model Years 2017 and Newer).

  • Genuine Weber part 66754 Set of 2 "lighted" main burner control knobs for Weber Genesis II "LX" (model years 2017 and newer)..
  • The 2-7/8" diameter knobs feature a gray plastic body with chrome trim, translucent skirt for emitting light, a red position indicator and a rain boot on the valve stem shaft. The valve stem shaft extends 3/8" beyond the bottom edge of the knob..
Check Stock

The Bundling Off L116T Light and 2m ac Adapter

  • 2800 psi 2.5 gpm Universal Power Pressure Washer Water Pump 308653052 for Homelite.
  • Specs - Maximum Pressure: 2800 PSI. Maximum Flow: 2.3 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Shaft. 3 Bolt Pattern: 7 11/16” x 6....
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube.
  • This pump mounts vertical and is a rear facing (water inlets/outlets come out of the rear of the engine). Pump needs at least 5.5HP to handle PSI.....
  • This pump may require 1/2" spacers when installed, depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine....
Check Stock

Himore | 3000 PSI Pressure Washer Pump, Universal, 3/4' Shaft fits Many Troy Bilt, Honda, Excell, Husky & Generac Models

  • Fits Honda Excell units with 3/4″ shaft only. Some Excell units have the 7/8″ shaft and this pump will not work..
  • UNIVERSAL PUMP – FITS MANY MAKES AND MODELS!.
  • HOLE DISTANCES ARE 2 5/8″ CENTER TO CENTER ON OUTER HOLES / 1 7/8″ FROM CENTER SHAFT HOLE TO EACH OUTER HOLE..
Check Stock

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • ..." Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
  • This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", One - 5/16" 18 x 3 1/2".
Check Stock

ATIE Neverlube Diverter Valve Kit 4720 Replacement for Jandy 2 Port or 3 Port Never Lube Diverter Valve 4720

  • Fits Jandy NeverLube 2 & 3 Port Valves and Jandy Gray 2 & 3 Port Valves.
  • Kit included: 1 Diverter Valve, 2 Shaft O-Rings, 1 Cap O-Ring, 1 Knob (black).
  • Aftermarket Replacement For Jandy 4720 Divert Valve Repair Kit.
  • Fit the Jandy Never lube & Standard Valves.
  • Does not fit Jandy large Diverter valve 4718, 4719.
Check Stock

Portable Blacksmith Propane Gas Forge Double Burner with Two Side Doors, 2600F Rated, for Knifemaking Blacksmith Farrier Forging Bladesmithing - Stainless Steel Forge

  • Tenacious and Tough: Our Propane Forge is built from 16 Gauge (1.5mm) Polished Stainless Steel grade SS-304 Metal Sheets and Nozzle materials is of SS-304 grade as well, making it more durable and long-lasting..
  • Prompt Heating: With the efficient burner mechanism that gives out neutral flame and the heating area geared with 1 inch thick pre rigidized Ceramic Fiber Blanket of density 10# and 1 inch thick firebrick along with additional heat guard (needs to be applied by you). This offers superior insulation value to the forge with reduced fuel consumption and quick heating. It can resist temperature up to 2600°F (1425°C) approx..
  • Voluminous: Simple yet effective design leaves you with ample space even after insulation to carry out forging conveniently. Forge Internal Dimension measures 5.8” (H) x 5.8” (W) x 18” (L)..
  • Portable & Compact: If required this forge is easy to move around from one place to another and also it won’t occupy much of your space..
  • Balance Right Temperature: The Air Intake Valve in the Burner and Regulator allows you the control the flow of air & gas and helps you to get to the right temperature for forging..
Check Stock