Reviews Forged Ball Trunnion Type

TaylorMade SIM 2 Max Driver Mens Right Hand Graphite Senior 12 Degree Ventus Blue

  • New Forged Ring Construction. Forged from a lightweight and high strength aluminum that is milled to an exacting shape, it unites a massive rear weight, a full carbon sole, crown and a new milled back cup face..
  • SIM Inertia Generator. The asymmetric Inertia Generator is designed to provide faster club head speed through advancedgeometry and aerodynamic analytics..
  • Speed Injected Twist Face. Improves ball speed by calibrating each head to the threshold of the legal speed limit with corrective face curvature also protecting against heel and toe mis-hits..
  • Thru-Slot Speed Pocket. Our most flexible Speed Pocket design engineered to maximize ball speeds and produce additional forgiveness on low face strikes..
  • Split Mass Weighting. Designed to enhance forgiveness while allowing for pinpoint target swing weights during custom assembly..
Check Stock

TaylorMade SIM 2 Max Driver Mens Right Hand Graphite Regular 9 Degree Ventus Blue

  • New Forged Ring Construction. Forged from a lightweight and high strength aluminum that is milled to an exacting shape, it unites a massive rear weight, a full carbon sole, crown and a new milled back cup face..
  • SIM Inertia Generator. The asymmetric Inertia Generator is designed to provide faster club head speed through advancedgeometry and aerodynamic analytics..
  • Speed Injected Twist Face. Improves ball speed by calibrating each head to the threshold of the legal speed limit with corrective face curvature also protecting against heel and toe mis-hits..
  • Thru-Slot Speed Pocket. Our most flexible Speed Pocket design engineered to maximize ball speeds and produce additional forgiveness on low face strikes..
  • Split Mass Weighting. Designed to enhance forgiveness while allowing for pinpoint target swing weights during custom assembly..Sport type: golf.
Check Stock

DURATECH Heavy Duty Ball Joint Press & DURATECH 8-Piece Pliers Set

  • ...nclude 4-wheel drive (4WD) adapter. The Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
  • DURATECH Heavy Duty Ball Joint Press - Made from heavy-duty forged steel technology, through the Charpy impact test, black oxide coated on the adapter with a robot hands helps improve oxidation and corrosion resistance, ensuring durability and long life. It is even ideal for professional mechanics.
  • DURATECH 8-Piece Pliers Set - Professional forged Cr-V Steel & Cr-Ni Steel & high quaility steel, heat-treated, provides high strength and durability. Chrome plated for rust resistance, with high hardness and wear resistance.
  • DURATECH 8-Piece Pliers Set - These pliers tool come with a soft TPR handle that makes them more comfortable and secure than others. The pliers set comes with a premium roll-up pouch for easy organization and convenient storage, and the tailored cover keeps pliers from sliding out.
Check Stock

TaylorMade SIM 2 Max Driver Mens Right Hand Graphite Stiff 10.5 Degree KuroKage Silver

  • New Forged Ring Construction. Forged from a lightweight and high strength aluminum that is milled to an exacting shape, it unites a massive rear weight, a full carbon sole, crown and a new milled back cup face..
  • SIM Inertia Generator. The asymmetric Inertia Generator is designed to provide faster club head speed through advancedgeometry and aerodynamic analytics..
  • Speed Injected Twist Face. Improves ball speed by calibrating each head to the threshold of the legal speed limit with corrective face curvature also protecting against heel and toe mis-hits..
  • Thru-Slot Speed Pocket. Our most flexible Speed Pocket design engineered to maximize ball speeds and produce additional forgiveness on low face strikes..
  • Split Mass Weighting. Designed to enhance forgiveness while allowing for pinpoint target swing weights during custom assembly..
Check Stock

TaylorMade SIM 2 Max Driver Mens Right Hand Graphite Regular 10.5 Degree KuroKage Silver

  • New Forged Ring Construction. Forged from a lightweight and high strength aluminum that is milled to an exacting shape, it unites a massive rear weight, a full carbon sole, crown and a new milled back cup face..
  • SIM Inertia Generator. The asymmetric Inertia Generator is designed to provide faster club head speed through advancedgeometry and aerodynamic analytics..
  • Speed Injected Twist Face. Improves ball speed by calibrating each head to the threshold of the legal speed limit with corrective face curvature also protecting against heel and toe mis-hits..
  • Thru-Slot Speed Pocket. Our most flexible Speed Pocket design engineered to maximize ball speeds and produce additional forgiveness on low face strikes..
  • Split Mass Weighting. Designed to enhance forgiveness while allowing for pinpoint target swing weights during custom assembly..
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life. Includes two stands - enough for both heads.
Check Stock

JET JWBS-15 15-Inch Woodworking Bandsaw 1-3/4HP 1Ph 115/230V 714600

  • Toolless Adjustments: Independently adjustable, upper and lower ball bearing guides.
  • Optimum Blade Support: Rigid, four-sided guide post with rack and pinion adjustment.
  • Three Heavy-Duty Tensioning Settings: Full tension, partial tension, and full release.
  • Maximum Support and Stability: Cast iron trunnion and precision-ground cast iron table.
  • Smooth and Easy Adjusments: Cast iron handwheels and ergonomically-designed knobs.
Check Stock

BTSHUB 5 in 1 Ball Joint Separator Pitman Arm Puller Tie Rod End Front End Service Splitter Removal Tool Set

  • This ball joint separator tool set is designed for removal of most of popular types of pitman arms, tie rods, and ball joints on most compact cars, mid-size cars and light pickup trucks.
  • Press type ball joint separator allows for ball joint removal without damage to boots and other part.
  • Allows for easy removal of most popular types of pitman arms, tie rods and ball joints.
  • Durable heavy duty forged tools constructed from heat-treated alloy steel with anti-rust plating finish.
  • You will get 1x Ball joint separator, 1x Tie rod and ball joint remover, 1x Conical pitman arm puller, 1x Pitman arm and tie rod end puller, 1x Pitman arm puller, 1x Well-organized plastic carry case.
Check Stock

Brian Tooley BTR Trunnion Kit V2 Rocker Arm Trunion LS1 LS3 4.8 5.3 5.7 6.0 6.2

  • BTR Trunnion Kit V2 Rocker Arm Trunion Kit. The all new Trunnion Kit V2 features a Trunnion with pre-installed inner race bearings..
  • The V1 kits have stood up to an enormous amount of abuse, but BTR decided to upgrade the to a pressed inner race comprised of 52100 Heat Treated Bearing Steel, over the more commonly used 8620 Carburized Steel found in our V1 kits and many OEM applications..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • Additionally, these feature a self oiling axle with priority feeding to the Trunnion itself..
  • FOR LS1/LS3/99-13 LS TRUCK STYLE ROCKERS. Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

Reese Towpower 8339 Fold-Down Gooseneck Hitch Platform

  • Takes only seconds to raise or lower the ball into position.
  • Forged, heat-treated 2-5/16" chrome ball standard.
  • Includes mounting hardware and integrated drop down spring loaded safety chain loops.
  • Platform and the ball are rated for 25,000 lbs. GTW and 6,250 lbs. vertical load.
  • Designed to allow unrestricted use of the truck bed.
  • Requires no alteration of factory exhaust systems.
  • Fold-down design allows unrestricted use of the truck bed when not towing.
Check Stock