Reviews Force Measurement

Mxmoonfree 500N Digital Force Gauge Push Pull Gauge with USB Output 500N/110Lbf/50Kgf Force Meter with Auto Power-Off, Auto Backlit LCD for Lab Tension and Compression Destructive Tests HP-500N

  • ...e gauge and various accessories can be put into the carrying case for convenient storage..
  • RECHARGEABLE BATTERY - The force gauge with USB output is equipped with a built-in Lithium battery and an AC adapter. When fully charged, it can be used continuously for about 6 hours, and each charge cannot exceed 12 hours..
  • 3 MEASUREMENT MODES - This pull gauge can switch three measurement modes (Real-time/PEAK/AUTO-PEAK). In "PEAK" mode, it can hold the maximum force applied shown on the screen..
  • PARAMETERS - Model: HP-500N | Capacity: 500N/110lbf/50Kgf | Resolution: 0.1N/0.01lbf/0.01Kgf | Accuracy: ±0.5% | Data Output: USB output | Lithium Battery: 5V, 1700mAh | Charger: Input (AC 100-240V 50-60Hz), Output (DC 5V 0.5A) | 2 sets of Installation Dimensions: 4-M3 (30*145mm), 4-M4 (40*90mm).
Check Stock

VANPO Digital Torque Wrench 3/8 Inch drive(5-99.5 ft-lbs./6.8-135Nm), ±2% Torque Accuracy, Electronic Torque Wrench with Preset Value, Buzzer and LED Indicator, Small Torque Wrench Set for Bike Moto

  • 【Memory Mode】 This digital torque wrench provides Track and Peak modes. In Track mode, a balanced force can be applied by changing the value of the display. Added 500 sets of data storage function, the torque value generated will be recorded in Peak mode, which is convenient for you to check at any time..
  • 【Measurement Mode】The electric torque wrench has four measurement modes: kg-cm, Nm, in-lb, ft-lb. Only need simple operation, you can clearly see the numerical conversion between the measurement units through the display screen. It will meet the switching use between the measurement units according to different situations..
  • 【Reminder Mode】 When using the 3/8 drive torque wrench to reach the preset torque value, a rapid buzzer will sound, and the LED light will change from a flashing green light to a solid red light. The reminder can effectively avoid screw damage caused by excessive force..
  • 【Quick release and high precision】This small torque wrench can easily and effortlessly replace accessories through the quick release design. And it has dual direction ratchet head function, and the clockwise accuracy can reach ±2%, which is more accurate and reliable than the value measured by a mechanical wrench..
Check Stock

Digital Force 100K Meter Gauge Pull & Push Magnitude Test Tester Newton Meter N/kg / lb/g Measurement for Manufacturing, Electronics, Building Hardware, Textile, Auto Parts

  • Force Range: ±100kgf / ±980N / ±220Lbf (3 measurement unit for selection and conversion, kg, N, lb. ).
  • Simple and convenient multifunctional instrument for high-accuracy push force and pull force test, push and pull load test, plug and unplug force test and destructive test..
  • With data memory and output function. Can memorize 99 groups of data and transmit to computers by USB cable (Not included) or Bluetooth adapter (Not included) for further analysis..
  • Being installed with a variety of test bench and fixture, and come with different tips and hooks, it is an ideal test machine for different uses..
  • Digital display & quick response with no guessing or errors..
Check Stock

Shimpo FGE-500HXY Digital Force Gauge 500 lb/200 kg/2500 N Measuring Range 4-Digit LCD Display 0.2% Accuracy

  • Measures tensile (pull) or compression (push) forces.
  • Displays present force or maximum positive or negative peak force.
  • Measurement accuracy of + or - 0.2 percent of full scale.
  • 1,000 hertz (Hz) maximum sampling rate updates measurements 1,000 times per second.
Check Stock

NaBalis G10 Upgrade Spaner Ultra-Lightweight Ball Bearing CNC Durable Crowbar Tool

  • If you need to find a multifunctional tool with simple long arm force, you must not miss it..
  • A screwdriver with a slotted head can open the handle to provide 1:100 torque and loosen the screws easily..
  • M5 and M6 wrench functions, and the extended handle provides 1:75 torque to easily open the nut..
  • Provide 5cm straight-line measurement. Simple line drawing..
  • G10 handle provides super friction force and refuses smooth handle..
Check Stock

Shimpo FGV-50XY Dart Digital Force Gauge Reversible Display 0.2 Percent FS Accuracy 0.01lbs Graduation 50lbs Capacity

  • Measures tensile (pull) or compression (push) forces.
  • Displays present force or maximum positive or negative peak force.
  • Measurement accuracy of + or - 0.2 percent of full scale.
  • 1,000 hertz (Hz) maximum sampling rate updates measurements 1,000 times per second.
  • USB, RS-232, and analog outputs provide connection to a computer or other compatible device.
Check Stock

Mxmoonfree 500N Digital Force Gauge Push Pull Gauge with Force Gauge Stand Wheel-Operated Manual Push Pull Test Stand Stroke 180mm/7\ with Digital Scale and HJJ-001 Clamp x2 (HLD Test Stand+HP-500N)

  • USB DATA OUTPUT - The Digital Force Gauge 500N can store up to 999 sets of PEAK test data. You can use the attached CH340 chip USB data cable to connect to a laptop and export real-time measurement data..
  • FREE SOFTWARE - We provide free software that can export test data or charts (force versus time curve). You can contact us to get the software. Mxmmonfree provides a 365-day warranty service and free technical support..
  • VARIOUS ACCRSSORIES - Digital Force Meter comes with Compression test parts *4, Tenslie test part *1, Extension rod *1, which are able to meet most of simple tests. The gauge and various accessories can be put into the carrying case for convenient storage. Test Sand comes with screws for installing the gauge and 2 pcs HJJ-001 Clamp for tensile tests..
  • DIGITAL DISPLACEMENT SCALE - This HLD Test Stand has a digital displacement scale (no output function), which can help you measure the displacement during the test. Measurement Range: 0-6"/ 0-150mm | Resolution: 0.0005"/ 0.01mm.
  • GAUGE PARAMETERS - Model: HP-500N | Capacity: 500N/110lbf/50Kgf | Resolution: 0.1N/0.01lbf/0.01Kgf | Accuracy: ±0.5% | Data Output: USB output | Lithium Battery: 5V, 1700mAh | Charger: Input (AC 100-240V 50-60Hz), Output (DC 5V 0.5A) | 2 sets of Installation Dimens....
Check Stock

Mxmoonfree 500N Digital Force Gauge Push Pull Gauge with Force Gauge Stand Force Test Stand Lever-Operated 70mm Stroke and HJJ-001 Clamp x1 (HPB Test Stand+HP-500N)

  • ... to 12.6 inches. When HP-series force gauge is installed, the height of the bottom of the gauge can be adjusted between 1.5 inches and 10.2 inches..
  • DISPLACEMENT SCALE - The digital displacement scale (no output function) helps you measure the displacement during the test. Measurement Range: 0-6"/ 0-150mm | Resolution: 0.0005"/ 0.01mm. And each force gauge stand comes with 1 Pcs HJJ-001 clamp..
  • VARIOUS TEST PARTS - Pressure test parts *4, Tenslie test part *1, Extensive shaft *1, which are able to meet most of the experimental requirements. The portable digital force gauge and various accessories can be put into the carrying case for convenient storage and carrying..
  • DATA STORAGE & OUTPUT - The digital force gauge can use USB for data output, and we provide free SOFTWARE for data analysis and recording. Each package will contain an RS-232→USB data cable. 【NOTE】If you need software, please find us to get it after completing the order..
  • RECHARGEABLE BATTERY - The force gauge with USB output is equipped with a built-in Lithium battery and an AC adapter. When fully ....
Check Stock

BAOSHISHAN NK-500N Force Gauge Push Pull Gauge Analog Mechanical Meter Tester with Portable Carrying Case

  • [PARAMETER] -- Capacity: 500N | Resolution: 2.5N | Unit: N/kg | Stroke: 10mm | Accuracy: ±1% | Net weight: 1.3kg/2.8lb | Relative moisture: 15%~80%RH | ONE YEAR warranty and professional technical support.
  • [HIGH QUALITY & ACCURACY] -- The shell of the tension force gauge is made of high-quality ABS plastic, with high strength and good toughness. The pointer dial is convenient for reading, accurate measurement and high precision..
  • [VARIOUS ACCESSORIES] -- Pressure test parts *4, Tenslie test part *1, Extensive shaft *1, which are able to meet most of the experimental requirements. The spring tension scale and various accessories can be put into the carrying case for convenient storage and carrying..
  • [PEAK/TRACK] -- The knob controller on the pull gauge can switch between the peak value load test and the continuous load test. Switching modes according to different experimental occasions can bring great convenience to your experiment..
  • [WIDELY APPLICATION] -- The handheld force gauge is widely applied in pull push load testing industry like electric, high & low voltage electric appliance, hardware, automobile parts, lighter and ignition system, light industry, mechanical, textile and insertion force or destructive experiment..
Check Stock

Digital Force Meter, 0N/100N/300N/500N Digital Display Dynamometer Force Gauge Push and Pull Tester Meter with 5 Side Heads for Industries Machinery (100)

  • HIGH QUALITY: This push-pull force gauge is made of high-quality metal + plastic materials, strong and durable, not easy to damage, and long service life..
  • TWO MODES: This digital push-pull force gauge supports peak/real-time two modes, adapting to changes.
  • it supports real-time display of values and also supports keeping the peak value unchanged..
  • INSTANT READING: high-definition large-screen display, high sensitivity, graduation value of 0.01, accurate value of thrust and pull, digital display design, reading is more intuitive, clear and convenient..
  • MULTIPLE UNIT CONVERSION: Newton, kilogram, pound and other commonly used measurement units can meet a variety of needs and are more convenient to use..
  • WIDELY USED: Digital push-pull force gauges are now widely used in electronics, high and low voltage electrical appliances, automobiles, chemicals, light industry, construction and other industries and scientific research institutions for tensile and compression loads, insertion and extraction forces, destructive test tests, etc..
Check Stock