Reviews Foot Control Relays

Ingcool Compatible with Raspberry Pi Expansion Board Power Relay Module Kits for Raspberry Pi 4B/3B+/3B/2B/ A+/B+ 5A 250V AC/ 5A 30V DV

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.
  • The RPi Relay Board gives your Pi the ability to control high voltage/high current devices, easily makes normal home appliances become intelligent..
  • High quality relays, loads up to 5A 250V AC or 5A 30V DC.Photo coupling isolation, prevent interference from high voltage circuit.
  • Relay control jumper, allows to control the relays by custom pins other than the default pins.Onboard LEDs for indicating relays status.
  • Comes with development resources, including examples in wiringPi, WebioPi, shell, python, and bcm2835.
Check Stock

MPC Emergency Manual Release Kit for Shaved Doors/Door Poppers

  • Built-in Relays - The new control module has built-in relays which eliminates 90% of wiring for a cleaner, faster, simplified installation. This system will shave AT LEAST an hour off the install time.
  • Single wire connections: No need to buy extra wire or make splice connections. Our new control module includes a wiring harness w/1 WIRE to run to each side of the vehicle & connect to the solenoid.
  • Programmable Safety Feature - To prevent accidents, our new control module automatically disables the door popper system if it sense that the vehicle is running.
  • Redesigned Remotes - Sleek two-button design w/a sliding cover to prevent accidental door opening while the remote is in your pockets. Press both buttons at the same time for optional trunk release!.
  • (2) Heavy-duty solenoids (45 lb. max pulling force), (2) chrome door poppers, RC receiver w/built-in relays per door, (2) 2-button 3 transmitters, (2) push buttons, steel linkage cable.
Check Stock

waveshare Raspberry Pi Power Relay Board Expansion Board Module Three Channel(3-ch) for Raspberry Pi A+/B+/2B/3B/3B+/4B Loads up to 250VAC/5A,30VDC/5A

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.
  • High quality relays, loads up to 5A 250V AC or 5A 30V DC.
  • Photo coupling isolation, prevent interference from high voltage circuit.
  • Onboard LEDs for indicating relays status.
  • Relay control jumper, allows to control the relays by custom pins other than the default pins.
Check Stock

Nilight 50023R 5 Pack 30A Fuse Relay car Truck Socket kit-30A Switch Harness Set-12V DC 4-Pin SPST Automotive 14 AWG Hot Wires-Auto Switches & Starters Set,2 Years Warranty

  • Upgraded Version – Automotive relays built in fuse socket included 30A blade fuses with heavy duty 14AWG wires for main contact. No need of a separate fuse holder, saving space and money. Bosch style 4-Pin SPST (Single Pole Single Throw) Relay..
  • Mounting Design Feature – The interlocking mounting design of unique male and female slot on each socket edge, connect relays together and manage cables easily, offering clean and neat installation..
  • Easy Wiring – The relay sockets come with color-labeled wires for load/accessories convenient wiring. Black – Ground (85), Red – VDC (30), White – Trigger (86), Blue – Output N/O (87).
  • Wide Application – Widely used in car keys power control, over-load protection, trunk release, polarity change, power door lock/actuator control, change a low current output to high current, add ignition/accessory outputs, control motors/other electronics etc..
  • Package includes: 5 relays, 5 relay harnesses, and 5x30A blade fuses..
Check Stock

MICTUNING 12V Fuse Relay Switch Harness Set - 30A ATO ATC Blade Fuse, 5 Pin SPST Automotive Electrical Relays with Heavy Duty 14 AWG Wires - 6 Pack

  • Upgraded Version - Automotive relays built in fuse socket with included 30A blade fuse, no need of a separate fuse holder, saving space and money. Heavy duty 14AWG wires for main contact.
  • Easy Wiring - The relay sockets come with color-labeled wires for loads/accessories convenient wiring. Black - Ground (85), Red - VDC (30), White - Trigger (86), Blue - Output N/O (87),Green-87a Output Closed Contact.
  • Neat Mounting Design - The interlocking design of unique male-female slot on each socket edge, easy to connect all relays together, offering clean and neat installationNeat Mounting Design - The interlocking design of unique male-female slot on each socket edge, easy to connect all relays together, offering clean and neat installation.
  • Good Construction - 12V DC (Max@14V DC) and 30A High Switching Capability. Bosch style 4-Pin SPST (Single Pole Single Throw) Relay. Metal mounting bracket on the electrical relay promotes easy installation.
  • Wide Application - Wide range of use, greatly used for car lights, fog lamps, wiper, starter, fans, speakers, traction control systems, etc.
Check Stock

Newest Raspberry Pi 8-Channel Relay Expansion Board 5V Power Relay Module for Raspberry Pi 4 3 2 Model B+ B Jetson Nano @XYGStudy

  • The RPi Relay Board (B) is an expansion board with 8-ch relays for Raspberry Pi.
  • It gives your Pi the ability to control high voltage products such as home appliances..
  • Standard Raspberry Pi 40PIN GPIO extension header, Supports Raspberry Pi A+/B+/2B/3B/3B+/4B and later versions, Jetson Nano.
  • High quality relays, loads up to 5A 250V AC or 5A 30V DC.
  • Photo coupling isolation, prevent interference from high voltage circuit.
Check Stock

IZTOSS 21-Slot Relay Box 7 Relays,9 ATC/ATO Fuses Holder with Metallic Pins and Relays Fuses for Automotive and Marine Engine Bay

  • SUPPORTS RELAYS & FUSES- Safely stores up to 7x Relays (compatible with 0.25" Pins), and (9x) middle size blade fuse (ATC, ATO).including 2 Pieces....
  • ACCESSORIES INCLUDED- Metallic pins are included so you can effortlessly swap out relays and fuses from the back of the fuse relay box..
  • INSTALLATION IS A SNAP- The Snap-Fit upper and lower cover cases allow easy access for relays, fuses, and wires..
  • VERSATILE MOUNTING OPTIONS- Since most modern vehicles have angular/sloping engine bays or trunk areas, we engineered the mounting legs to snugly....
  • OEM-STYLE PROTECTION- Tidy up your vehicle's engine bay by securely stowing away your relays and fuses in this sturdy relay box for a clean factory....
Check Stock

Electronics-Salon DIN Rail Mount AC/DC 24V Control 8 SPDT 16Amp Pluggable Power Relay Module, G2R-1-E

  • OMRON G2R-1-E industrial power relays, switching current up to 16A at 250VAC (or 30VDC), and easy to replace pluggable relays..
  • LED indicator for each relay channel , relay coil protection by means of a freewheeling diode..
  • High quality screw terminal block, FR-4 fiber glass PCB, dual copper layers..
  • Panel mount or DIN rail mount versions are available. Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the carrier can be taken apart for panel mount use..
Check Stock

GZAIR Smart Wi-Fi Indoor Air Quality Monitor, Data Logger, PM2.5, PM1.0, TVOC, CO2 Detector, Temperature & Humidity, Real-Time Data via App

  • 6 IN 1: Measure PM2.5, PM1.0, TVOC, CO2, Temperature, and Humidity, with a sensitive laser particle sensor, laser TVOC sensor, and accurate NDIR CO2 sensor. .
  • Automatic & Manual Calibration: Offer two calibration modes, Manual Calibration, and Automatic Calibration. We have calibrated it manually in the factory, and it can automatically calibrate during the detection..
  • Wi-Fi Enabled & APP Smart Control: Smart PT02 can connect to the Internet, works seamlessly with Tuya App, Set alerts, receiving air quality measurements anytime and anywhere..
  • Wireless IoT Controller: Create a Smart Scene in the Tuya app, make PT02 control the Smart home appliances. First, you should add Smart PT02 and other Smart home appliances to Tuya APP. Then set the conditions. The PT02 monitor will activate Smart Fans, Air Purifiers, or other appliances in response to changes in your home’s air quality..
  • Supports RS485/Relays Signal Output: The RS485 port and Relay port are located on the rear of the device. And the RS485 supports data export. The Relays can control the appliances directly (This function is only recommended for professional personnel or engineers.).
Check Stock

TE CONNECTIVITY / POTTER & BRUMFIELD T92P7D22-12 POWER RELAY, 12VDC, 30A, DPST-NO, FLANGE

  • Electromagnetic relays are widely used: household air conditioner compressor motors, fan motors, cooling pump motors, starter relays for car starters, spur relays, motors, generator circuit breakers, industrial relays, etc.
  • Product Name: Electromagnetic Power Relay.
  • Red mechanical indicatoe:It can intuitively judge whether the relay is attracted.
  • LED signal lamp : It can judge the AC or DC coil, and judge whether the coil is energized.
Check Stock