Reviews Flush Cut Pliers

VIM Hand Tools V2300 Push Pin Removal Pliers Set, 2-Piece

  • [Ensure Flush Cuts]: Whether cutting wires and trimming spurs from models or removing trim clips and pins, the ABN Panel Clip Pliers Automotive Trim Pliers will create clean, precise cuts.
  • [Flat Blade Design]: Flush right angle side cutters pliers have flat 1-inch (2.5cm) long cutter blade that provides flush cuts on up to 12-gauge copper wires.
  • 2.5mm hole allows for easy insulation trimming.
  • [Finish Projects]: Flat edge trims plastic and metal from models and circuit boards.
  • Use electronics right angle cutting pliers wire snips as push pin pliers, rivet removal tools, electrical nippers, jewelry wire flush cutter pliers, craft cutters, or floral wire cutter.
  • [Trusted Quality]: Spring-loaded panel clip cutter pliers cut quickly and cleanly and open automatically, while durable forged steel construction ensures maximum strength.
  • [Anti-Slip Grip]: 4-inch (10.2cm) long rubberized handles provide a secure, comfortable grip for convenience and optimal operation of this wire clipper automotive clip removal pliers.
Check Stock

170 Wire Cutters Flush Cutter Pliers Set (red)

  • Precision Side Cutters: Flush Cutters angled tip is nice for tight cuts. Producing a flat, flush cut. Cutting Pliers for artificial flowers, electronic industry repair, jewelry processing, zip ties, circuit boards, plastic, model making and fishing, etc.(But do not cut the steel wire, please pay attention to this.).
  • Ultra-Sharp Wire Clippers: Improved knife design easily snips wire up to Φ1.3mm, flush cut pliers weight approx. 63-64g / 2.2-2.3oz..
  • High Hardness Diagonal Cutters: Our small wire cutters made of high quality Cr-V steel, The Cr-V steel surface is coated with anti-rust oil and has a long service life. Pure fire treatment makes the clamp body more sturdy and durable..
  • Spring Loaded Model Nippers: Wire cutters heavy duty with Steel return spring for increased comfort during repetitive cutting. The side cutters pliers handle can automatically reset, easy to open and close, fast, and more efficient.
  • Rubber handle Micro Cutter: Wire cutters for artificial flowers are rubber-coated handle, Comfortable ergonomics handle can reduce fatigue when using.Our diagonal pliers are professionally processed and tested, As a designer and manufacturer of dykes cutter, we are very much looking forward to receiving your suggestions and ideas about our heavy duty....
Check Stock

WISEPRO Mini Diagonal Pliers, 4.5 Inch Micro Wire Flush Cutters, Precision Side Cutting pliers with spring shrapnel loaded

  • Mini Diagonal Pliers: The precision diagonal pliers features two 45 degree sharp cutters, the wire flush cutter are used for general cutting and provide a flush cut for cutting thin metal wire and jewelry string wire, help cutting to the edge you need..
  • High Leverage Designed: The mini pliers are designed with labor saving concept. High leverage joint design for greater cut force. Powerful gripping require less force when using the pliers..
  • Spring Loaded: Each mini pliers are loaded with two leaf springs, allowing the pliers to stay open and work directly. save labor and easy to work in tight areas..
  • Lightweight: The mini pliers are very light in mass and easy to carry and handle, the soft TPR/PP grips fit well in hands, the handle is non-slip and at the same time help better control..
  • Premium Material: All the mini pliers are construct 45# carbon steel, high-frequency quenching, final nickel plating on the surface of the pliers, protect the precision pliers from rust and corrosion, build to last..
Check Stock

2Pcs 5 inch Small Flush Cutters Wire Snips Clippers Diagonal Cutters, Wire Cutter Soft Copper Wire Snips and Side Cutting Pliers for Electronic, Model, Jewelry Making (blue)

  • Ultra Sharp Wire Cutters: 5 inch cutting pliers, wire cutters are Ultra Sharp and made of special high quality hard alloy material, the jewelry wire cutters is very easy to use, side cutters pliers can snip wires up to 16 AWG..
  • Ergonomic Design for Side Cutters Pliers: The side cutters have a non-slip rubber handle, which is based on ergonomic design can play a protective role and provide a comfortable grip. floral wire cutter is very easy and comfortable to hold..
  • Flush Cut Pliers Ability: Cutting pliers cuts soft copper wire 16AWG mm (1.3 mm), 3D printing filament (1.5mm), iron wire 18AWG (1.0mm), the metal wire snips is easier to cut most hard things..
  • Versatility Wire Stripper Tool: The flush wire cutters, Wire Snips are suitable for cutting soft copper wire, plastic wire, small cable, aluminum wire, soft alloy wire, and this small wire cutters is ideal for jewelry making crafting, Soft materials, Electronics, Plastic, Edge banding, etc..
  • Metal Cutter Tool: Do not use the cutting pliers to cut objects beyond its cutting capacity, like hard metal, otherwise the cutting edge might be broken and cause irrecoverable gaps. please pay more attention that wire cutters are non-insulated, please cut off the power before using..
Check Stock

GEARWRENCH 5 Pc. Mixed Mini Dual Material Plier Set - 82100

  • Set includes 4-1/2 in. diagonal cutting pliers, 5 in. long nose pliers, 5-1/2 in. needle nose pliers, 4-1/4 in. end cutting nipper pliers and 5-1/4 in. flat nose pliers.
  • Slim handle and head design for unparalleled access.
  • Solid flush rivet for better access and tighter tolerance.
  • Spring keeps handles open to reduce hand fatigue.
  • Forged from durably strong premium alloy steel.
  • Dual material handles offer a more comfortable grip and higher performance.
  • Mini long nose pliers allows access into tight spaces, will grip small parts and bends wire.
  • Mini end cutting pliers to cut through wire, nails, springs and more, the almost flat blade head allows you cut close against the surface without digging into it.
  • Mini thin needle nose pliers reach into narrow spaces to pull, bend, twist and grip wires.
Check Stock

Wire Cutters, Flush Cut Pliers, Chrome-Vanadium Steel, Ultra Sharp, Floral Wire Cutters, Cutters Pliers for Wire Cutting 5 Inch

  • High-quality Material: The wire cutters pliers body is made of sturdy chrome vanadium steel, the entire blade is heat treated and blackened at high frequency, the surface is finely polished, there is no burr on the blade, and it is strong and wear-resistant..
  • Flush Cut: Double edge process, induction hardened, sharp and durable, resulting in a flat, flush and clean cut..
  • Easy To Grip: With rubberized handle, ergonomic handle and streamlined design are comfortable to hold, and spring-loaded wire cutters reduce fatigue..
  • Scope of Application: This flush cut pliers has a wide range of applications, suitable for cutting wires, wires, cable ties, plastics, etc. It is an essential tool for jewelry processing and handicrafts..
  • Reminder: Please note that the side cutters are non-insulated, please cut off the power before using this flat wire cutter. It is not recommended to use this wire cutter to cut wire or any other hard metal material..
Check Stock

AMERICAN MUTT TOOLS 8 Inch End Cutting Pliers, End Cutting Nippers – Heavy Duty End Nipper Pliers and Nail Puller Pliers | Nail Nippers Tool, Screw Cutter Tool, Fret Cutters Flush, End Cutter Pliers

  • Like a Hot Knife Through Butter: The end nippers flush cut heavy duty compound leverage design helps you effortlessly cut through nails, screws, staples, frets and more. Great nail cutting pliers for carpentry..
  • Ergonomic: Give your hands the break they deserve. Our end snips ergonomic handle design helps eliminate fatigue from extended use. The end cut pliers also easily fit into most tool pouches..
  • Built To Last: The 8 inch bull nose pliers heavy duty cutting heads undergo a specialty heat treatment process which allows these nipping pliers to cut just as cleanly the 100th time as they did the 1st time..
  • Heavy Duty: Made from precision forged alloy steel, this fret puller pliers tool works just as hard as you do. Our pincer pliers use compound leverage to allow you to slice through nails with just one hand..
  • Limited Lifetime Manufacturer Warranty: This bullnose pliers tool is backed by the American Mutt Tools Limited Lifetime Warranty for your complete peace of mind. Our brad nail puller is professionally made in China..
Check Stock

WORKPRO 2 Pack Wire Cutters, 6 Inch Precision Flush Cutters, Spring Loaded Side Cutting Pliers, Sharp Diagonal Cutters for Crafts, Jewelry Making, Electronics

  • Cutting Capacity: 5/32-inch (4mm) for copper wire, and 3/32-inch (2.3mm) for other soft wire. Not suitable for hard or big gauge wires..
  • Specialized Flush Cut: WORKPRO flush cutting pliers deliver superior cutting performance with precision ground blades for clean, smooth and precise cuts. The angled head allows for easier operation in tight spaces..
  • High Strength Steel Construction: The 2 pack flush cutters are made from heat treated and polished carbon steel, providing long-lasting durability and cutting strength. Rust protection reduces corrosion and increases tool life..
  • Spring-loaded Design: These 6 inch diagonal cutting pliers have ergonomic comfort grips for non-slip use and a spring mechanism for self-opening action to reduce hand fatigue..
  • Wide Application: Use these wire cutters to easily cut wire, zip ties, and other fine materials. Ideal for crafting projects, jewelry making, electrical work and home repairs..
Check Stock

Micro Wire Flush Cutter Internal Spring 5 Inch Professional Wire Cutting Pliers Electronic Shear Wire Cutters Side Cutters Pliers (Black-3pcs)

  • Small Size: Micro 170 side cutters flush,5 inch palm size.It’s perfect for cutting Max 1mm Copper Wire, Electronic Wire etc..
  • Wire cutters are made of high quality carbon steel, flush cutter’s edge is specially hardened with high-frequency heat treatment, provide durability and long life..
  • Wire side cutter pliers has 10mm long jaw with angled head design for flush-cutting applications,can be cut up to 18 AWG copper wire (0.04 "/ 1mm).PVC hand grips comfortable for operation and control,non-slip handle, spring loaded for easy use..
  • Lightweight spring design,easy to open and engage while using it.Suitable for cutting soft copper/iron wire,electronic feet,trimming plastic products,also can be used for DIY jewelry making,model cutting and fishing..
  • There is a small amount of lubricating oil in the pliers, which is a normal phenomenon,and it can keep the pliers to prevent rust. The oil can be wiped off easily..
Check Stock

Microworld 2Pcs/Set Mini Flat Nose Plier Nipper Tool for DIY 3D Metal Puzzle Model Kit Jigsaw Assembling

  • Microworld official recommend tool, professional for 3D metal puzzle cut tool, facilitates the building of 3D quality models from metal sheets..
  • Flush Cutter (Clipper) -Machined jaws provide maximum gripping strength. Induction hardened ensure cut edge stays sharp longer, allow you to cut....
  • Needle Nose Pliers (Flat Nose Pliers) - Smooth, non-serrated jaw faces won't mar soft metals or finished parts. Used to hold parts plus bend and twist....
  • Combining with ergonomic design, wide and flat handles with slim, nonslip grips provide comfortable fingertip control and reduce hand fatigue,....
  • 100% Quality Guarantee: Excellent nose pliers for hobbyists and crafters, especially for puzzle lover. Make it easy for model making, and other....
Check Stock