Reviews Flush Bottom

DeerValley DV-1F52816 White Ceramic Standard Comfortable Seat Height Elongated Dual Flush One Piece Toilet with Soft Closing and Quick Release Toilet Seat

  • ✅[Stylish and Personalized Design]: Contemporary and one-piece design, exactly what you are looking for. Perfectly suitable for your modern design bathroom..
  • ✅[Highly Efficient Dual-Flush]: 1.28 GPF for full flush (adjustable with floater) /0.8 GPF for half flush (adjustable on flush cistern) with a powerful flush system. It has two flush options and both are water-saving features..
  • ✅[Suprior Quality Seat]: With soft closing and push button removable design, this toilet seat makes easy to get off and will never disturb your family..
  • ✅[Fully Skirted Trapway]: Compared to two-piece toilets, it has no corners and grooves and is very easy to reach for cleaning. The way the bottom is shaped makes it easier to clean as well..
  • ✅[All-in-one packge]: Package Includes toilet, pre-installed soft closing toilet seat, pre-installed water fitting, high quality wax ring , floor bolts , and installation instruction..
  • ✅[Warranty]: DeerValley toilets are warranted to be free of defects for one year from the date. One-year Limited warranty on flushing mechanism and Soft-Closing toilet seat lid. Lifetime after-sale service, 24 hours online..
Check Stock

Newport Brass 502 Tank Lever for Kohler Highline Toilets, Antique Nickel

  • ...y locations such as a loft/attic, upper floor, ground floor, basement and even a garage. It's very easy to install in areas such as under the stairway for a half bathroom or an additional half bathroom in a bedroom or garage conversion..
  • COMAPCAT SIZE. Macerating toilet size is: 20.86”x13.18 ” x 18.11” and the bottom of toilet size: 16.92”x 10.23”. The size is almost same as normal toilets, only difference is that install a grind pump inside of the toilet..
Check Stock

HTDAK 12 Inch (About 30cm) Toilet Fill Valve Silent Toilet Repair Water Saving Dual Flush Fittings Silent Split Toilet Valve Top Button Replacement Assembly

  • Toilet flush valve: for split toilets with top button, button hole diameter 3.8cm, drain hole diameter 6cm-7cm, measured tank height: 27cm-34cm, with tank cover height: 32cm-40cm.
  • Toilet filling valve: for toilets with bottom inlet, installation thread G15/16, adjustable range according to different tank heights: 27cm-34cm..
  • The double flush valve of the toilet can adjust the water level up and down to achieve full flush or half flush, and save water by adjusting the flush volume to reduce unnecessary expenses..
  • The toilet replacement valve kit is made of stainless steel, high-density carbon particle rubber, and high-quality silica gel: it has anti-corrosion, wear-resistant, rust-proof, leak-proof and other properties, and is suitable for operation under various water pressures and water quality..
  • The universal toilet replacement valve body is simple in structure, easy to replace, and only takes 10 minutes to install. It is easy to clean and maintain, so that your toilet components can continue to run smoothly..
Check Stock

Pelican - Kayak Fishing Rod Holder - Flush Mount Rod Holder– Fishing Tackle Accessory - Recreational Kayak Rod Holder

  • Convenient: This flush-mount rod holder allows you to turn your recreational kayak into a fishing kayak. It's an essential tool for kayak fishing..
  • Strong And Durable: This flush-mount rod holder is made with strong polypropylene material. It has a watertight bottom to prevent any leaks. The....
  • Compatibility And Dimension: The installation of the flush mount rod holder requires a 6.35 cm (2.5 in.) hole. It fits any standard fishing rod..
  • Easy installation - mounting hardware included – requires a 2. 5 in. (6. 35 cm) installation hole.
  • Included: It comes with the mounting hardware..
Check Stock

CMT 806.690.41B Xtreme Compression Flush Trim Bits 2 Flutes Carbide Tipped

  • These XTREME flush trim bits guarantee the best possible finish along with extra-long life thanks to one-of-a-kind spiral technology..
  • The compression, spiral design with 4 cutting edges produce a flush trim bit that has an upcut shearing cut on one half of the bit and a downcut shearing action on the other half. This design eliminating splintering and tearout on the top and bottom of the material you’re working with..
  • Made with high quality carbide are crafted using special brazing techniques..
  • Ideal for flush trimming and pattern routing on projects involving solid wood, melamine and veneers..
Check Stock

Yonico Router Bits Pattern Bit Flush Trim Top and Bottom Bearing 2-1/2-Inch Cutting Length x 3/4\ Cutting Diameter x 1/2-Inch Shank 14135

  • This top and bottom bearing flush trim bit has a 2-1/2" cutting length and a 3/4" diameter. The total length of the bit is nearly 5" with a 1/2" shank.
  • Versatile top and bottom bearing flush trim router bit for challenging woodgrain.
  • Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge.
  • For use on table mount and handheld router.
  • Silver induction brazing for maximum strength and durability.
Check Stock

Sanimove One-piece Toilet for Small Space, 600Watt Macerating Toilet with the Macerator Pump Built in the Base for Basement Toilet System

  • ...y locations such as a loft/attic, upper floor, ground floor, basement and even a garage. It's very easy to install in areas such as under the stairway for a half bathroom or an additional half bathroom in a bedroom or garage conversion..
  • COMAPCAT SIZE. Macerating toilet size is: 20.86”x13.18 ” x 18.11” and the bottom of toilet size: 16.92”x 10.23”. The size is almost same as normal toilets, only difference is that install a grind pump inside of the toilet..
Check Stock

WINSOON Adjustable Floor Guide for Sliding Barn Door, Wall Mount Bottom Hardware System for Closet Bypass Doors TV Stand

  • [ POWERFUL FLOOR BOTTOM GUIDE ] - Made of high quality steel with powder-coated matte black finish, works great to replace the plastic door guide, our sliding door guides mounts to the wall/closet, cause no damage to the floor, help prevent cabinet door from swinging/wobbling..
  • [ CONCEALED BARN STYLE ] - Universal door guides are simple & easy to use, the glide will slide invisibly through any bottom grooving door, avoid accidently kick on your feet/toes, leave no marks on the surface, keep the door clean and safer..
  • [ ADJUSTABLE FIT DOOR THICKNESS ] - WINSOON Barn Door Guide can also act as stay rollers, by create a “U” shaped adjustable channel that accommodate a thicker non- grooving door up to 1-1/2 inch, or grooving door 1-9/16 inch..
  • [ SLEEK DESIGN FLUSH BOTTOM ] - Flat head screws, and countersunk mounting holes ensure a flat contact surface, won’t scratch/stick door, complete flush bottom of the door guides make the installation so easy, also looks very elegant and clean..
  • [ PRODUCT INCLUDES ] - 1 Pcs Floor Guide, 2 Pcs Flat Head Screws (for mounting) + 2 Pcs Adjusting Screws, 2x Ribbed Plastic Anchors, PLEASE CHECK THE MEASUREMENT ON THE PICTURE BEFORE PURCHASING, comes with 5 years product warranty, any proven defects/missing compone....
Check Stock

FaithLand Sliding Barn Door Floor Guide, Adjustable Wall Mount Stay Roller Guide, Non-Scratch Rollers, Flush Bottom, Barn Door Panel Non-Groove, 8 Setup Options, Black -Pack of 2

  • ✅ SUPERIOR FEATURES: Heavy duty - Quiet - Flush bottom - 8 Setup options - 2 Pairs of different lengths screws included - Countersunk holes - Fit door panel thickness up to 3 5/8".
  • ✅ HEAVY DUTY CONSTRUCTION: The body is made of high-quality carbon steel, it's STRONG & RELIABLE! Anti-rust with a frosted black finished surface. This durable floor guide prevents the door from swinging during the movement and keeps it stable and safe..
  • ✅ SMOOTH AND QUIET GLIDE: Engineered POM rollers will not scratch or discolor door, working smoothly and quietly..
  • ✅ COMPLETELY FLUSH WITH FLOOR AND ADJUSTABLE WIDTH: Flush bottom ensures the door guide sits on the floor without scratching the floor, more stable and beautiful. By adjusting the position of the rollers to fit your door panel, fit door panel thickness up to 3 5/8"..
  • ✅ 8 SETUP OPTIONS AND EASY TO INSTALL: Three guide rollers can be configured 8 different ways to fit your unique needs and style. 2 pairs of different lengths screws available for mounting, complete hardware included for hassle-free installation. Mount to the wall with screws, and no groove required for door. Suitable for floor, wall, window or TV cabinet..
Check Stock

Modern Fan Company Altus 52" Gloss White Ceiling Fan w/Wall Control (ALT-GW-52-WH-NL-001)

  • Model: 42" Modern Fan Company Altus Gloss White Hugger Ceiling Fan with Wall Control (ALT-FM-GW-42-WH-NL-001).
  • Design: The Modern Fan Company is the premier source for contemporary ceiling fan design. The Altus Flush Mount Ceiling Fan in a brushed aluminum finish features a modern look and sleek profile that upgrades bedrooms, offices, lounges and more. The three Altus Flush blades are constructed of plywood with 42" blade spans in aluminum color. These fan blades are positioned at the bottom of the fan, furthest from the ceiling, to allow for maximum airflow from a hugger style fan..
  • Measurements: 12.1" Height Top to Bottom / 42” Blade Sweep.
  • Airflow: High Speed CFM (Cubic Feet Per Minute) 4107.
Check Stock