Reviews Flow Measurement Valve

1\ HEAVY DUTY HIGH FLOW IN-LINE COMPRESSED AIR PRESSURE REGULATOR 180 CFM

CO2 pressure regulator has two valves to independently measure flow rate and remaining CO2 tank contents (CO2 tank sold separately).
Valves have dual-scale readings in psi and kg/cm.
Needle valve flow control provides precise flow adjustment and measurement.
Includes flow regulator, needle valve, electronic solenoid, and bubble counter.
NOTE:Kindly refer to the Regulator Set Up Procedure provided as a PDF manual in the product description section.

...ce, good sealing performance and repeatable installation..
【Easy to Use】The product is easy to install and maintain, and it is safe and reliable to work. If you need a long time and stable control, it is best to use it with a regulator..
【Widely Applications】Needle valve is an important part of the instrument measurement pipeline system, used to adjust the flow to the instrument or other industrial applications, open or cut off the pipeline path. Generally used in water, steam, gas, oil and other media with smaller flow and higher pressure. It is often used in industrial automatic control piping systems such as ships, oil refining, chemical, electric power, medicine, and food..

【Easy to Read】This regulator comes with a 0~180Psi dial gauge, Makes adjusting your pressure values a piece of cake..
【Port Size】The air regulator has 4 holes,Three holes of 1/4" and one Gauge Port 1/8"..
【Adjustment Knob】The air pressure regulator has a plastic adjustment knob that allows for smooth "light touch" flow settings..
【Accurate Measurement】The air compressor pressure regulator Provides accurate gas flow regulation and Accurately measures gases..
【Package included】1 x Air Pressure Regulator (Four-way valve), 1x Dial gauge for the 1/8" ,1 x Valve Shut Off Switch, 1 × 1/4" × 1/4" Male Pipe,....

★Needle valve is an important part of the instrument measurement pipeline system, used to adjust the flow to the instrument or other industrial applications, open or cut off the pipeline path.
★Generally used in water, steam, gas, oil and other media with smaller flow and higher pressure. It is often used in industrial automatic control piping systems such as ships, oil refining, chemical, electric power, medicine, and food.
★Made of high-grade solid brass, exquisite processing, can withstand greater pressure than other types of valves, good sealing performance, if you need a long time and stable control, it is best to use it with a regulator.
★Working pressure: rated ≤15MPa. The temperature range is -40℃ to 200℃.
★Packing includes: 2 PCS 1/4 " Female * 1/4"Female needle valve ，with 1 PC Teflon tape..

Built-in check valve prevents back-siphoning and protects CO2 system and air pump equipments from water damage.
Integrated bubble counter to accurate airflow measurement.
Air tube clip ensures secure air tube connection and continuous air-flow.

This 3/4″ water check valve is installed in the inlet side of the circulation pumps plumbing to prevent the back flow of water through the circulation pump once the jet pump is activated.
Works on Tiger River Spas, Hot Spring Spas, and Limelight Spas..
All water check valves have arrows stamped on the outside to indicate the direction of flow which should be pointer towards the circulation pump..
Troubling Shooting: The symptoms of a non-operative check valve are.
* Water Leak – If water is leaking from around the check valve, it should be replaced. * Rattling – A rattling check valve indicates that water is not being allowed to flow properly past/ through the check valve. * Verify the check valve is installed with the flow in the correct direction. * Heater High-Limit Tripping – Poor water flow through the check valve could lead to heater high-limit tripping. Ensure the check valve is n.

Extra fine ceramic micro bubble diffuser plate. Quantity in package: 1 piece..
Compact design enables optimal CO2 diffusion.
Provides an accurate measurement of the CO2 flow rate.
Check valve protects the gas system and air pump equipment from back-siphoning damage.

【PVC Ball Check Valve】Schedule 80 PVC ball check valves have a spherical ball inside the valve body which works as a check to allow flow in one direction and close off to prevent back-flow..
【INSTALLATION TIP】PVC union check valves are designed for VERTICAL installations, MUST be used in an upflow position to work properly. Check valves MUST be installed with the valve's flow arrow pointing in the direction of the flow. Do not install valve upside down.（NOTE: NO SPRING).
【PVC Union Check Valve】True union check valve, can be taken apart for cleaning, allows for easy removal without breaking down the piping connection..
【Material】1'' Slip check valve made of PVC material, O-ring with EPDM material, low-temperature-resistant, impact-resistance, ultraviolet-resistance, rust-resistance. Fits for Schedule 80 1 Inch Pipe..
【Application】PVC Swing Check Valve 1’’(DN25) - Non-return or "one way" valve is ideal for flow control, such as commercial plumbing, aquariums, irrigation, swimming pools, water parks and OEM applications..

✅DESIGN- Forged brass construction which provides strength and durability eliminating leaks. The chrome-plated finish gives it a modern look..
✅QUALITY- The Teflon seats of the valve resist corrosion and provide a watertight seal. Chrome-plated finish resists corrosion..
✅EASY TO USE- Brass ball mechanism provides ease of operation. It has a removable oval handle which provides easy grip..
✅FUNCTIONALITY-With 1/4 turn, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home..
✅MEASUREMENT- Professional Series Quarter-Turn Angle Stop Valve has a 1/2-inch Iron Pipe Inlet (FIP) x 3/8-inch OD Compression Outlet..

Automatic vacuum valve ensures proper fuel flow and eliminates the need for manual vent.
Portable Fuel Tank is designed for use in all Marine and non-marine small engine applications and will provide years of leak-free performance.
Low permeation tank virtually eliminates fuel evaporation and fuel loss.
Fuel Tank includes built-in gauge for easy reading and measurement.
Complies with 2010 EPA regulations and meets EPA CFR 40, California CCR 2468 and AS/NZS 2906:2001 standards.