Reviews Float Level Controller

JBJ Automatic Top Off Water Level Controller for Aquarium

  • Equipped with two float sensors that activated with in seconds when your water level drops.
  • Refills your sump or tank to reaches your set point.
  • Electronic controller allows for two modes of operation with a total of three different set up scenarios.
Check Stock

JBJ Automatic Top-Off (A.T.O.) Replacement Float Sensor

  • Replacement Float Sensor for the JBJ Automatic Top-Off (A.T.O.) Water Level Controller.
Check Stock

YOUMU Stainless Steel Automatic Dog Waterer Bowl with Float Valve and 1M Hose(one end 3/4''), Livestock Waterer for Dog Goat Cattle (with Drainage Hole)

  • -Package included: 1pcs stainless steel waterer bowl (with drainage hole) +1m hose +1 pcs plastic water level controller (if you have any questions about the product, you can contact us directly).
  • -Material and size: High-quality 304 stainless steel, strong and durable, will not rust all year round. The extended hose can meet your length requirements. Large capacity: maximum capacity of 2.5L to satisfy your pet's drinking water demand..
  • -Automatic and convenient: it use of float water level floating principle control the inlet and outlet water switch, to achieve a constant water level effect, keeps enough water and always clean water since the plastic water level controller will be bitten by pets， we fix the cover so that the pet cannot open it..
  • -Easy to install : Not only can be placed directly on the ground, but also the water bowl can be fixed on the wall with expansion bolts, which is easy to operate.(Rear 2 screw fixing holes, easy to fix ) There is a drainage hole at the bottom to release residual water.
  • -Smooth edge polished： to avoid traumatic infection the caused by scratching.
Check Stock

2 Inch Dial Face 1/4 Inch NPT Water Pump Pressure Gauge with 1/4 Inch NPT Male 1/2 Inch NPT Adapter Brass Fitting and Tape

  • NEW GENERATION: On the basis of the drain mode, our Ortis water level controller has added a water mode and 3 load running mode for you to choose, you can manully select the load running mode according to your needs. The Values are clearly displayed with LED indicators, easier to check and set for you.
  • HI-LO DUAL SENSORS: The hi-lo sensors uses a patented water level detection method, which keeps the electrode intact for 10 years. It is made of 304 stainless steel and is not affected by mineral or water debris. It has strong corrosion resistance and never needs to be cleaned. The height of two sensors is adjustable, you can decrease how often the pump turns on/off by adjusting the sensors in order to save energy and max your pump's service life.
  • SAFE & STABLE: Ortis pump controller can completely overcome the shortcoming of the tranditional mechanical float switch which is prone to mechanical failure. Long life and small size, no moving parts in pit ensures reliability and is used in various application scenarios, stable and safe.
  • OVERLOAD & PUMP FAILURE ALARM: When the pump power is greater than 23A, overload protection will be activated to protect your safety. Built-in alarms will alert you in case of pump failure, blocked discharge pipe, and more.
Check Stock

Water Filter Float Ball Valve 1/4 Inch Adjustable Float Valve Plastic Water Tank Float Valves for Ponds, Water Pump, Water Trough, Aquariums, Aquaculture, Water Tank, Reservoir (4)

  • Size and material: you can connect float valves to the 1/ 4 inch supply tube, you can install an appropriate number of water float valves according to the size of the water tank to meet your needs in different situations.
  • The ball of the water float valve is made of PE material, the other parts are made of POM material, low temperature resistance and corrosion resistance, durable and non-toxic, can serve you for a long time.
  • Adjustable design: the plastic water tank float valves come with adjustable arms, when the water level of the water tank is low, the gate of the float valve opens to ensure that water can enter, when the water level rises, the ball of the water float valve and the adjustable arm will form a flat angle and close in this state, realizing the automatic adjustment of high water level and low water level.
  • Wide applications: the adjustable sink float valve can be applied for ponds, small water tanks, toilet storage tanks, household water purifiers, pools, aquariums, aquaculture, reservoirs, industrial and large water tanks, etc., if needed, you can choose to use multiple float valves at the same time, so that water can be input faster.
  • Easy to operate: the angle of the valve ball is adjustable, you can flexibly set according to the requir....
Check Stock

Fluval Ribbed Hosing for 306/307 - 406/407 9.8Ft A20015

  • Kamoer ATO one se automatic water replenisher, a good helper for the fish tank at home! It has the function of adding water overtime alarm to prevent water level overflow caused by sensor failure..
  • This ATO is equipped with S1 float sensor, also called anti-overflow sensor (to prevent excessive water replenishment and water overflow), S2 optical sensor (also called water replenishment sensor) and S3 water replenishment bucket level sensor. It detects the water level of the refill bucket. . Usually note: In the case of ATO running normally, S1 is not working, and the float state is sinking. S2 works..
  • In daily use, S2 is a sensor that detects the lowest water level. The function of S1 is to cause the float to rise when the water level exceeds the S2 optical sensor and reaches the S2 float sensor when S2 fails (for example, foam is generated in the sea tank, etc.) Alarm, stop refilling..
  • The float sensor detects whether the water replenishment tank is short of water, and once the water is short, it will stop and alarm..
  • Please install the sensor correctly (the main picture has a picture description), otherwise the product will not work. And the distance between the two sensors is not less than 10cm. The height difference between the make-up bucket and the ....
Check Stock

MySpool Water Level Alert with Text Message and Email Notifications, Battery Powered with a Float Sensor

  • Email and text message notification when water level change is detected. All services are free..
  • Battery powered wireless water level detector using your WiFi, no app to install and no hub is required. Perfect as a standalone high or low water alarm..
  • Waterproof float sensor with a 3 ft wire connected to a rugged enclosure protecting smart electronics. This float sensor can be used to detect high or low water levels, the default setting detects high water levels. Flip the float ring and use this device to detect low water levels in aquariums, ponds, and storage tanks..
  • Alert is sent if the float rises to signal high water level. Flip the float ring to send alert when water level falls. 3 AAA batteries, included, last for years with limited activity..
  • Rugged enclosure supports up to 250 lbs, designed to operate in dusty and moldy environments. Avoid costly repairs by keeping MySpool Water Detector anywhere that has the potential for flooding or developing a leak..
Check Stock

Carefree 95663 Small Fountain Protector, 4-Ounce

  • MAINTAIN WATER LEVEL: This water auto fill system uses float water level floating principle to control the inlet and outlet water switch, automatically keeping the water level of the fountain constantly consistent, the water volume is sufficient, and the water is always clean. So there is no need to worry that the fountain will dry up, saving your manual filling trouble..
  • WATER AUTO FILL KIT: Includes 10 feet of 1/4" tubing, float unit with stainless steel base, fitting for hose or faucet connection and fitting for 1/2" threaded irrigation line. Its simple adjustable water level float, which you can flexibly set the angle according to the requirements of the water level, keeps the fountain at the required water level between 3 and 8 inches.
  • an float extender provided for water deeper than 6 inches..
  • PREMIUM PRODUCT: All components of the water auto fill system are made of plastic or stainless steel to prevent rust, oxidation, corrosion, etc. Easy to maintain, easy to replace accessories and easy to use. Small compact set..
  • QUICK INSTALLATION: Comes with complete instructions for easy installation. Includes 2 screws to mount the kit..
  • GOOD HELPER: Suitable for bird baths tiered fountains, sidewall fountains and ponds. just set it and forget it. It is abso....
Check Stock

Remote Control Submarine

  • 【Remote Control Submarine】This RC submarine can dive into water with instructions from the controller, just like a real nuclear submarine sailing....
  • 【Water Activated】There is no switch on the submarine. When put it into water, the submarine will activated and the head light will turn on....
  • 【Multifunction】It is a 4 channel RC toy which can go forward (Diving), go backward (float upward), turn left, turn right, dive, float upward.....
  • 【Easy to Charge】The submarine integrates a built-in rechargeable battery, and it can be charged by USB charging cable. The Remote Controller....
  • 【Specifications】Working Time: 8 mins, Charging Time: 10 mins, Remote Control Distance: 4m /13ft, Submarine Size: 3.7 x 2.6 x 2.4 inch.
Check Stock

2Pcs Brass Float Valve 1/2" Supply Tube Automatic Fill Water Adjustable Float Ball Valve with Adjustable Arm Water Float Valve for Livestock Waterer, Aquariums,Ponds, Aquaculture, Hydroponics

  • PACKAGE INCLUDED: You will receive 2 pieces water float ball valves and 1 roll plumber's tape..
  • PRINCIPLE of OPERATION: The float valve could control the flow rate and opening and closing of the inlet pipe through the floating of the ball. When the water level rises to a certain level, the water injection will be cut off.
  • when the water level drops to a certain limit, the water is automatically injected..
  • APPLICATION: The float valve is suitable for water storage tanks, pools, aquariums, fish tanks, livestock sinks, aquaculture, etc. 1/2" male thread inlet, suitable for most types of water pipes, easy to install and adjust..
  • HIGH QUALITY MATERIAL: The arm and connector of water float ball valve is made from high quality brass and the float ball body is made from plastic..
  • AFTER-SALES SERVICE: The float ball valve can only work properly if the water pressure is appropriate. We promise to provide every customers with satisfying shopping experience. If you come across any issues during use our products, please feel free to contact us..
Check Stock