Reviews Flexible Gas Line

EZ-Fluid 24" Stainless Steel Corrugated Yellow Epoxy Coated 1/2" MIP x 1/2" FIP Gas Flex,Flexible Natural Gas Connector Hose Supply Line For Gas Pipe,Hot Water Heater,Range,Dryer,Stove(1 Pack)

  • EZ-Fluid Stainless Steel Corrugated Flexible Natural Gas Hose Connector Suppy Line Has Yellow coated polymer exterior for extra protection and flexibility.
  • EZ-Fluid 3/8" FIP or 1/2" MIP x 1/2" FIP Stainless Steel Corrugated Yellow Epoxy Coated Gas Flex,Flexible Natural Gas Connector Hose Supply Line. CSA certified and ideal for indoor and outdoor use.
  • Comes with MIP and FIP flare fittings. Fits on 1/2" FIP Gas valve or 1/2" Flare x 1/2" FIP Gas Valve,Male end Flare Fitting come with 1/2" NPT outter Thread and 3/8" NPT inner Thread..
  • Application For residential/commercial tank and Gas tankless ,Hot water Gas heater, boiler, fryer, stove,Dryer,Range,Gas Pipe ,Fire pit ,Grill and more.
  • The corrosion-resistant yellow coating protects the product from exposure from harsh weather and certain chemicals.
Check Stock

IKENIUP One Stop Gas Appliance Hook Up Kit, 22'' Stainless Steel Flexible Gas Connector with 1/2''Brass Gas Shutoff Valve for Gas Log, Gas Dryer, Garage Heater, Gas Stove, Wall Heater and Fireplace

  • INCLUDES EVERYTHING FOR INSTALLATION - This Gas Appliances Installation Kit Includes 22” flexible gas line (with 1/2" Female Flare on both end) , 3 different adapters (1/2" Male Flare x 1/2" Male Pipe, 1/2" Male Flare x 3/8" Male Pipe & 1/2" Male Flare x 3/8" Female Pipe), 1/2" brass gas shut off valve, and yellow gas pipe thread seal tape. It has everything needed for installing most gas appliances and easy to install..
  • HIGHLY DURABLE & LONG SEVERITY LIFE - Made of High Quality 304 Stainless Steel. Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances..
  • CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise..
  • BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown..
Check Stock

EXCELFU Flexible Dryer Gas Hose Dryer Gas Appliance Line Connector with Fittings Compatible with 1/2' OD 1/2' MIP x 1/2' FIP Hose Connection, Stainless Steel(6 Feet)

  • Hose Fittings are compatible with 1/2" MIP and 1/2" FIP, it can create a secure metal connection for heavy-duty use.
  • Designed for gas dryer: This 72" Flexible Stainless Steel Gas Appliance Line is not universal, it is mainly designed for gas dryers and not for ovens or ranges.
  • Product Parameters: Inner dimensions of this line are 3/8", Outside dimensions of this line are 1/2".
  • Corrugated design: This gas line hose with corrugated design can achieve full flexibility, it snaked into small spaces including corners and bends easily.
  • Easy to install: No tools need to install the piping. It come with male and female iron pipes for easy connections. Make sure you are in need of 1/2 gas piping otherwise this will not fit.
Check Stock

F271239 One-Stop Universal Gas-Appliance Hook-Up Kit for Replacement Mr.Heater fits Gas Stoves, Gas Dryer, Garage Heaters, Gas Fireplaces and Wall Mounted Heaters

  • 【Product Features】Replacement Mr.Heater F271239, 22" Universal Appliance Hook-Up Kit. The Brass Gas Shut-Off Valve Shuts Off Flow Directly for Easy Equipment Maintenance or Summer Shutdown..
  • 【Applicable Objects 】Ideal for Use with Gas Logs, Garage Heaters, Gas Stoves, and Wall Heaters. Compatible with: Heaters, Logs, Stoves, Dryers, etc..
  • 【Easy to install】This Gas Dryer Installation Kit is Very Easy to Install. All it Takes is a Wrench and a Bit Of Teflon Tape and You'll Be Set Up in Minutes..
  • 【Quality Assurance】The Gas Dryer Fitting Kit is Made of Highly Durable Steel and Is Designed For Safety and Optimal Flow. It is Gas-Tight, Durable, Rust-Resistant, and Corrosion-Resistant. The Flexible Gas Hose is Designed with Corrugation, Which is Highly Flexible and not Easily Damaged. and The Corrugated Gas Fittings are Staggered Every 2 Inches to Eliminate Noise..
  • 【Product Includes】You will Get a 6-Piece Universal Gas-Appliance Hook-Up Kit. Includes 22" Flexible Gas Line, On/Off Valve, and 3 Different Couplings..
Check Stock

Grehitk Flexible Gas Line Connector for Dryer(3/4 24inch), Gas Hose Connector Kit for Stove, Water Heater, Gas Log, Pipe Diameter 1 in. OD(3/4 in. ID), Connector Size 3/4" FIP.3/4"MIP, Stainless Steel

  • SIZE- Length 24 inch flexible yellow coated 304 stainless steel gas connector hose, flexible gas hose supply gas line connector adapter:2 pack 3/4 Inch FIP, 2 pack 3/4 Inch MIP(Tapped 3/8In FIP ), and 1set threaded tape..
  • HIGHLY DURABLE- High quality corrugated stainless steel gas hose with multiple types of threaded joints to create a safe metal connection.Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • It has good air tightness, durability, rust and corrosion resistance..
  • COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor..
  • EASY TO INSTALL- Only one wrench and a little bit teflon tape are all you need to install the hose. Trust me, no more than 2 minutes. Note: The one side of joint connected to the yellow corrugated pipe cannot be wrapped with raw tape! Otherwise it will cause air leakage!But the other side of the joint should be wrapped..
Check Stock

Gas Connector Kit 24 inch Yellow Coated Stainless Steel, 3/8” OD Flexible Gas Hose Connector for Gas Log and Space Heater, 1/2" FIP x 3/8" MIP Stainless Steel Fittings, 24” Gas Appliance Supply Line

  • ...long with a 3/8” outer diameter and 1/4” inner diameter. Includes a 1/2" FIP x 3/8" MIP stainless steel fitting..
  • CORRUGATED DESIGN FOR FULL FLEXIBILITY. A corrugated gas appliance gas connector offers maximum flexibility, as the corrugated design makes for a flexible gas hose by allowing to bend and snake the yellow coated gas line connector into small spaces, bends, and corners..
  • REINFORCED HEAVY-DUTY QUALITY: Our gas supply connectors are quality tested and CSA certified, to serve you faithfully for years to come. Gas hose withstands 30 bends without leakage and 15 applications of 90 degree twists. Works in temperatures up to 800 degrees. Fittings create a leak-free seal within a torque of 1,040 inch-pounds..
  • EASY INSTALLMENT: No special tools required to install this gas connector. Includes stainless steel corrosion-resistant fittings with threaded end connections which easily connect to your gas supply line, and create a secure, leak-free seal..
  • ONE YEAR WARRANTY: We stand behind our products to ensure only the best quality materials and product performance. We o....
Check Stock

Mr. Heater F271239 One-Stop Universal Gas-Appliance Hook-Up Kit,Small

  • 5-piece universal gas-appliance hook-up kit.
  • Comes with everything needed for installing most gas appliances.
  • Includes 18-inch flexible gas line, 3 different couplings and on/off valve.
  • On/off valve provides easy servicing of appliances or summer shutdown.
  • Solid brass fittings. One Stop Universal Gas Appliance Hook Up Kit has everything needed for installation and can be used with gas logs, unvented wall mount heaters, gas stoves, and garage heaters.
Check Stock

Kinchoix 24" Flexible Yellow Coated Gas Hose Connector Kit for Stove Dryer Furnace Gas Water Heater Flexible Gas Line with Connector 3/4" FIP & 3/4"MIP Fitting

  • ...ainless steel gas line hose mainly use for connecting gas stove, gas dryer, furnace, gas water heater. Gas pipe outside dimension of 1'', inner diameter 3/4''. Thicker pipe diameter can transmission gas quickly..
  • 「STURDY MATERIAL」- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, comes with a 3/4" male brass fittings on both end, standard male and female pipe threads for easy connection..
  • 「EASY TO INSTALL」- Easy to install the hose connector kit for your gas dryer. Only one wrench and a little bit teflon tape are all you need to install the hose..
  • 「CAUTION」- The connectors and fittings are designed for use only on the original installation and not to be reused for another gas appliance or at another location. Test for leaks only with leak test solution. Rinse with clean water after leak testing..
Check Stock

RealFyre Split Oak Designer Plus Vented Gas Logs (SDP-30), 30-Inch

  • Peterson Real Fyre gas logs are meticulously hand painted to re-create the look of natural wood.
  • Superior refractory ceramic logs are reinforced with steel rods for greater integrity.
  • Efficient design helps preserve and protect natural resources.
  • This Peterson Real Fyre gas log set is designed for indoor use only.
  • Includes Flexible Gas Line Connection Kit for easy hook up.
Check Stock

Aero-Flex® Universal Replacement Trimmer Head - Four Flexible line Blades - Fast & Easy to Change Flexible Blades | Saves Time - No More Line Trimmer Line!

  • EASY CHANGE: Aero-Flex line blades require less than one minute to change. Better than the bump head!.
  • FLEXIBLE BLADES: Aero-Flex line blades are flexible & safe but maintain their stiffness when cutting.
  • AGGRESSIVE: Aero-Flex runs its patented flexible blades which will help you finish your job faster.
  • DURABLE: Aero-Flex line blades are durable for grass/brush & edging. Best when run at lower speeds.
  • MADE IN THE USA: We make the product in The USA & it fits most gas-powered trimmers and some cordless (see list).
Check Stock