Reviews Flexible Gas Connector

Kinchoix 24" Flexible Yellow Coated Gas Hose Connector Kit for Stove Dryer Furnace Gas Water Heater Flexible Gas Line with Connector 3/4" FIP & 3/4"MIP Fitting

  • 「WHAT YOU WILL GET」- The gas hose connector kit mainly includes a 24in gas hose, 2 pc 15/ 16 -16 UN x 3/4'' FIP, 2 pc 15/ 16 -16 UN x 3/4'' MIP (Tapped 5/8'' FIP) and a sealing tape. Factory leak tested 100% pass!.
  • 「COMPATIBLE WITH」- A stainless steel gas line hose mainly use for connecting gas stove, gas dryer, furnace, gas water heater. Gas pipe outside dimension of 1'', inner diameter 3/4''. Thicker pipe diameter can transmission gas quickly..
  • 「STURDY MATERIAL」- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, comes with a 3/4" male brass fittings on both end, standard male and female pipe threads for easy connection..
  • 「EASY TO INSTALL」- Easy to install the hose connector kit for your gas dryer. Only one wrench and a little bit teflon tape are all you need to install the hose..
  • 「CAUTION」- The connectors and fittings are designed for use only on the original installation and not to be reused f....
Check Stock

TIG Welding Torch WP17FV Flexible 13 Feet Air Cooled with 10-25/35-50 Plug Valve 0.04 -1/8 Tungsten Electrodes TIG Welder Adapter for High Frequency/Lift TIG Welder

  • [Plug Size] WP17V flexible comes with quick fitting connector 10-25 and 35-50 plug(can be replaced as needed), air cooled with valve.
  • 0.02" to 3/32" tungsten electrode available.
  • [Flexible TIG Torch] Torch head can be adjusted to any angle as you want.
  • V-style torch knob to control gas on/off for quick and convenient control of shielding gas.
  • [Applicable Models] Can work with Reboot RBM-1300/RMB-1600/RBM-2100D/RBM-1550D as those welders support a LIFT TIG mode.Also the RBT-200PD/ACDC high frequency tig welder..
  • [How to use Lift Tig?] Connect to negative on the mig or stick welder with the quick fitting connector(correct your plug),blue cable for gas connection and leave the 2pins socket along,plug the ground clamp to positive.
  • [Standard Length] 13 Feet ,M16*1.5 & Two-pin socket,please check your tig welder before orders.
Check Stock

Beaquicy STV-90 Dryer Duct Connector - Snap to Vent 90 Elbow - Indoor Hook-up Dryer Vent Kit

  • ✅【PRODUCT DESCRIPTION】: The STV-90 dryer duct exhaust connector consists of a buckle to the exhaust 90 elbow, a buckle connector and a sealing ring connected to the wall conduit or dryer conduit. 90 degree diameter elbow dryer connectors are used to attach semi-rigid or flexible dryer hoses without hose clamps. Made of silicone and other sturdy materials to ensure that dryer hose vent fittings do not crack, tear or squeeze when using connectors..
  • ✅【AIRTIGHT】: STV-90 dryer conduit connector Universal dryer connector for electric and gas dryers. The silicon seal ring of STV-90 dryer pipe connector provides you with a sealed dryer connection. The silicone seal has a strong viscosity and is not easy to fall off, making your dryer more efficient while consuming less energy, allowing clothes to dry faster and saving electricity..
  • ✅【90 DAYS WARRANTY】:The STV-90 dryer duct exhaust connector supports 90 days return and exchange. Our company attaches great importanc e to the shopping experience of each customer. Risk-free shopping, if you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve t....
Check Stock

Flowmeter Hose with 5/8\-18 Male Connectors - 5 Feet Long

  • For its use with Flowmeters for Shield Gas in TIG and MIG Welding.
  • Gas Service: Argon, Argon/CO2 Mixtures, Helium.
  • 5 feet hose with 5/8"-18(M) connector fits flowmeter and all major welder brands. Designed for MIG and TIG welding.
  • 290 psi Max Pressure - Braided and flexible - Manufactured in high quality rubber..
Check Stock

EXCELFU Safety-Shield Gas Appliance Line Flexible Dryer Gas Hose Connector Kit - 5/8 In. OD (1/2 In. ID) 1/2 In. MIP X 1/2 In. MIP X 3/4 In. MIP X 48 In. Length Yellow Coated

  • Adapter Included 2 Pcs 5/8 In.OD Flare x 1/2 In. MIP (Tapped 3/8 In. FIP) and 2 Pcs 5/8 In.OD Flare X 3/4 In. MIP (Tapped 1/2 In. FIP).
  • This gas appliance connector kit are designed for Ranges, Stoves, Furnaces or Boilers.
  • 304 Stainless steel flexible tubing with plated steel end fittings capacity 106,000 BTU.
  • 48 inch long stainless steel corrugated gas range and dryer connector kit are perfect for indoor or outdoor use.
  • This gas line hose with corrugated design can achieve full flexibility, it snaked into small spaces including corners and bends easily.
Check Stock

ODOORGAS Portable Propane or Butane Heater Outdoor Camping, 2 in 1 Space Tent Heater, Stove w/Convenient Handle for Camping Heater Accessories, Orange

  • 【SAFETY IS THE KEY】Our Portable Outdoor Heater had CE certificate( safety certification mark), 4,400- to 10,000-BTU radiant heater for spaces up to 250 square feet. Piezoelectric ignition, built-in connector with over- pressure(auto) cut-off funtion for reduces leaking risk..
  • 【DUAL FUEL】One connetor work for different types of gas fuel.You can use propane gas or butane gas as your convenience. No more worry about proper gas is not available around. One connector can reduce the risk of gas leaking. Remember to use this portable heater in a ventilation space..
  • 【FLEXIBLE ANGLES】This propane space heater can be adjusted in different angles to meet your preference or anywhere you sit. It is small but powerful to heat up your food, and it can be a heater to heat up a small area quickly, Camping Tent Heater can not only keep you warm, but also bring you faster cooking..
  • 【FAST HEATING】This 2 in 1 Space Tent Heater can output can go up to 4,400- to 10,000 BTU/hr and heats up instantly. No need to wait! Having it, you would have a warm adventure outdoors, such as camping, ice fishing, hiking, backpacking, hu....
Check Stock

Portable Propane Heater Camping Stove with Hose, Outdoor Butane Heater Camping Gas Stove Camp Tent Heater for Ice Fishing Backpacking Hiking Hunting Survival Emergency, Black

  • 【SAFETY IS THE KEY】Our Portable Outdoor Heater had CE certificate( safety certification mark), 4,400- to 10,000-BTU radiant heater for spaces up to 250 square feet. Piezoelectric ignition, built-in connector with over- pressure(auto) cut-off funtion for reduces leaking risk..
  • 【DUAL FUEL】One connetor work for different types of gas fuel.You can use propane gas or butane gas as your convenience. No more worry about proper gas is not available around. One connector can reduce the risk of gas leaking. Remember to use this portable heater in a ventilation space..
  • 【FLEXIBLE ANGLES】This propane space heater can be adjusted in different angles to meet your preference or anywhere you sit. It is small but powerful to heat up your food, and it can be a heater to heat up a small area quickly, Camping Tent Heater can not only keep you warm, but also bring you faster cooking..
  • 【FAST HEATING】This 2 in 1 Space Tent Heater can output can go up to 4,400- to 10,000 BTU/hr and heats up instantly. No need to wait! Having it, you would have a warm adventure outdoors, such as camping, ice fishing, hiking, backpacking, hu....
Check Stock

Whitecap Industries G-3460SSC Stainless Steel Gas Spring - 12\ to 20\

  • 【Material】 - M8 thread is made of PA66A5,simple design, good quality, durable..
  • 【Feature】 - Gas spring strut joint connector end fitting..
  • 【Advantage】 - Gas spring end fitting connector can be used over and over again,easy removal..
  • 【Application】 - Gas spring end fitting connector is a good replacement of gas springs ball strut, and the gas springs are ideal motion control devices for lifting, holding, counterbalancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies..
Check Stock

DOZYANT 24 Feet 1/2 ID Natural Gas Hose Propane Gas Grill Quick Connect/Disconnect Hose Assembly with 3/8 Female Flare by 1/2 Male Flare Adapter for Outdoor NG/Propane Appliance

  • 1/2" ID natural gas hose with 1/2" Quick Disconnect Plug Kit x 1/2" Female Flare Fittings. Use to convert outdoor appliance to natural gas supply....
  • Comes with 1/2" Male Flare to 3/8" Female Flare Brass fittings, to convert your 3/8" connector propane/natural gas grill.
  • Perfect for hooking up weber grill, fire pit, patio heater, pizza oven and portable generator.
  • 24-foot durable rubber hose, flexible enough to move your gas device as needed. Quick disconnect feature allow to swiftly disconnect hose.
  • Supplies up to 100K BTU/Hr, provide adequate gas flow for 30-in and larger grills.
Check Stock

Plumb Shop Brasscraft CSSL54-24P Stainless Steel Gas Dryer Connector, 24-Inch

  • Flexible stainless steel corrugated tubing with stainless fittings.
  • A.G.A. Approved for indoor or outdoor use according to ANSI Z21.24 and Z21.45. 1/2" Male I.P.S. X 1/2" Female I.P.S. Fittings.
  • Corrugated flexible Stainless Steel gas dryer connector.
  • Polymer coated, 1/2-Inch inside diameter, 5/8-Inch outside diameter, tube with fittings.
Check Stock