Reviews Flex Ducts

Deflecto Extra Heat Dryer Saver, Accommodates 4\ Transition Ducts, Includes 2 4\ Plastic Clamps, White (EX12)

  • Save the heat from your clothes dryer and divert it into your home with our Extra Heat Dryer Saver.
  • Adjustable flap deflects heat and humidity inside during cold weather and deflects them outside during warm weather.
  • Clean filter screen after each use for optimal performance and safety.
  • Do not vent gas clothes dryers into bathrooms or bedrooms.
  • Some building codes may restrict the use of this product, always check the local codes in your area.
  • Open doors in small rooms for adequate distribution of heat and moisture.
  • Use with UL listed Supurr-Flex clothes dryer transition duct (not included).
  • Product Dimension: 7.875 X 5.875 X 5.375 Inches.
Check Stock

Draft Blocker 6 Inch - Backdraft Damper - Draft Stopper - Backflow Preventer - Vent Deflector 6 Inch

  • Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring....
  • Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC....
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal....
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from....
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are....
Check Stock

Draft Blocker 4 Inch - Backdraft Damper - Draft Stopper - Backflow Preventer - Vent Deflector (4'' Inch)

  • Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
  • Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications.
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ....
Check Stock

Draft Blocker - 4'' Inch Backdraft Damper Duct - Draft Stopper - Backflow Preventer - Inline Fan Vent - Vent Deflector (4'' Inch)

  • Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
  • Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications.
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ....
Check Stock

Frida Mom 2-in-1 Lactation Massager - Multiple Modes of Heat + Vibration for Clogged Milk Ducts, Increase Milk Flow, Breast Engorgement - USB Cord Included

  • Increase milk flow: vibration + heat bust through buildup + clogged ducts, and get milk flowing. Choose the mode you need to get the job done..
  • Relieve clogged ducts + engorgement: the breast care tool to have on hand for pain-in-the-boob nursing + PUMPING moments and to prevent other symptoms and supply issues..
  • Different ends + sides: help unclog stubborn ducts, pull out blocked milk and empty breasts..
  • Pocket-size + rechargeable. No batteries Needed, just recharge with USB cord - even on-the-go!.
  • Water resistant. Designed to be used for massages in the shower (when the flow won't go!)..
Check Stock

30 FT Dryer Vent Cleaning Brush,Dryer Vent Cleaner Kit,Chimney Cleaning Brush Kit,Fireplace Chimney Brushes Kit,Dryer Duct Cleaning Kit,Use with or Without a Power Drill 1 Year Warranty

  • ... Cleaner Kit】Includes twenty-three 410mm flexible rods, two dryer vent cleaner brush heads,two drill connections,a wooden handle brush,an electrical tape.Dryer Duct Cleaning Kit Extends Up to 30 Feet, reaching anywhere you just can't quite reach.Fireplace Chimney Brushes Kit work great with PVC, flex ducts, metal ducts, pipes, and delivers results fast.Note:Please don’t use it for flexible foil duct work..
  • ❤【Multifunction Cleaner Brush Kit】Dryer Vent Cleaner Brush Kit can easily be used on chimney, dryer vent, and any pipes. using dryer vent cleaner brush kit to cleaning the trapped lint and dust in dryer gap and exhaust port.and also for cleaning the coils behind your refrigerator,accumulating dust and dirt anywhere , this dryer vent cleaner brush kit can easily reach in and clean it.the highly flexible POM rod that can be bent up to 90°or more..
  • ❤【Easy To Use】Dryer Vent Cleaner Brush Kit can be used with or without any kind of power drill.Connect the brush head to any of the rods and secure each connection with duct tape for added reinforcement.Always use the drill in a clockwise direction and low speed to prevent the rods from unscrewing at the threaded connections.Fireplace Chimney Brushes Kit extremely dura....
Check Stock

Allstar ALL42151 Black 3" x 10' Brake Duct Hose

  • Brake duct hose measures 3 inch diameter x 10 feet long.
  • Hose is flexible, features a non-kink design, and directs air from the front ducts to the spindle ducts.
  • Made from a black 3 inch double-ply neoprene-coated woven fiberglass hose with a spring steel inner and external fiberglass supports.
  • Features a smooth inner wall for unrestricted air flow.
Check Stock

DGT35 Galvanized Round Transition (5\)

  • 【Size】Made of galvanized steel. Adapts 8 inches to 6 inches. Round Ducting Adaptor.
  • 【Widely Application】Designed for bathroom extractor fans, HVAC systems, inline ventilators, cooker hoods, tumble dryers, hydroponics, kitchen..
  • 【Adventages】Maintains airflow efficiency by creating a connection between two different sized duct openings..
  • 【How to Use】The solid duct reducer or increaser can be used when connecting two different solid or flexible ducts or ducts to ventilators, 8 to 6 inch, or vice versa..
  • 【Easy to Install】Put it in the two ducting, easy to install the air duct reducer..
Check Stock

4 Inch Draft Blocker Backdraft Damper Duct Draft Stopper One-Way Airflow Ducting Insert Backflow Preventer Inline Fan Vent Deflector Silver

  • 【Material】The 4 inch backdraft damper is made of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel..
  • 【Installation】The backdraft damper is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation..
  • 【Function】This airflow regulating backdraft shutter fits over the TD lip and is designed to improve ventilation by preventing air from re-circulating when the fans are not in use..
  • 【Wide Application】 These backdraft dampers can be widely used in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other residential, commercial and industrial applications..
  • 【Note】Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different..
Check Stock

4 Inch Draft Blocker Backdraft Damper Duct Draft Stopper One-Way Airflow Ducting Insert Backflow Preventer Inline Fan Vent Vent Deflector (4 in)

  • 【Material】The 4 inch backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel..
  • 【Installation】The backdraft damper is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation..
  • 【Function】This airflow regulating backdraft shutter fits over the TD lip and is designed to improve ventilation by preventing air from re-circulating when the fans are not in use..
  • 【Wide Application】 These backdraft dampers can be widely used in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other residential, commercial and industrial applications..
  • 【Note】Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different..
Check Stock