Reviews Flat Leg Mounting

Universal TV Stand, Base Table Top TV Stand, TV Legs, TV Pedestal Feet for Vizio Samsung LG TCL Televisions with Mounting Holes Distance 2.16in/5.5cm or Within 1.77in/4.5cm

  • ATTENTION：This TV leg does not work with all TVs,So pls make sure there has 2 mounting holes on the left and right side of the back of the TV near the bottom,and mounting holes distance exactly 2.16in/5.5cm or less than 1.77in/4.5cm..
  • UNIVERSAL COMPATIBILITY：Tabletop TV replacement base works with Sony, LG, Sharp, Insignia, Vizio, Haier, Toshiba, Sharp, Element, TCL, Westinghouse TVs..
  • EASY TO INSTALL：Simple TV installation takes only a few minutes and comes with the necessary hardware..
  • HEAVY DUTY CONSTRUCTION AND STABILITY：TV Base Pedestal is made of nice aluminium alloy to support up to 99 lbs on the flat screen panel TVs..
  • NO SCRATCH：High quality padding under the leg base protects the top surface of your desk, dresser, cabinet top, or entertainment center..
Check Stock

General Tools 450-6 Flat Leg Divider, 6-Inches

  • Hardened and tempered Bow springs and fulcrum spools assure uniform tension without side play while using this flat leg divider.
  • General Tools flat leg dividers is a useful measurement transfer tool for uneven surfaces.
  • Also great for a variety of uses such as tracing contours and scribing circles into metal.
  • The forged steel legs feature hardened points for precise marking of the work piece.
  • An adjusting screw has a self-seating washer and nut to permit quick and positive adjustment.
  • Hardened and tempered bow springs and fulcrum spools assure uniform tension without side play while using this flat leg divider.
  • This flat leg divider has 6 inch legs and a 6-1/4 inch jaw capacity.
  • General Tools flat leg dividers are frequently used in conjunction with General Tools precision rulers for the most accurate measurement transfer.
Check Stock

Warmaxx Heavy Duty Metal Furniture Table Legs H Type Black DIY Iron Legs 32 inch Height Industrial Square Tube Sturdy Legs for Bench Coffee Computer Dinning Table Office Desk Legs 2 Pcs with Screws

  • [Ultra-sturdy metal legs]: This table leg is real metal and can definitely handle a heavy duty load. They are made from sturdy wrought iron in a matte black finish,through careful sanding and painting. Very stable and sleek looking..
  • [Dimension&Weight]: Width 12" x Height 32" x Deep 2.4". And the weight of the table leg is 15.4lb..
  • [Super easy to install]: Each of the product has mounting plate with pre-drilled holes. The mounting plate is wide and the strew holes are clear and aligned..
  • [No wobble]: 100% straight and stable. Very sturdy and thick metal. There are six flat gasket in the package, you can use it as you need..
  • [Widely Used]: This H type metal furniture table legs are great ideal for live edge slab tables, coffee tables, side tables, DIY desks, end tables, computer tables, office tables, benches and any furnitures..
Check Stock

Metal Furniture Legs Round Tapered Brass or Black 6 1/4\ H Heavy Duty Modern Affordable 4pc by Alpha Furnishings (Black)

  • 4PC PREMIUM QUALITY: 6 1/4" height, 1.4”-2.5"D black tapered metal furniture legs in flat black.
  • BEAUTIFULLY CRAFTED: with thick mounting bracket, 3.5”x3.5”x0.12”.
  • HEAVY DUTY & SAFE: 150LB/LEG vertical weight load, Glide-bottom feet to help prevent scuffs and scratches on floors..
  • EASY INSTALLATION: come with pre-drilled 4 holes on each leg.
  • MANY APPLICATIONS: Great for sofas, couches, cabinets, vanities, entertainments centers, and more. Small spending, large return, instant face-lift for your old fashioned furniture. Available in both brushed gold or brushed satin (stainless steel) finish. Stunning, modern, and simple Very stable and looks fabulous DIY made easy and affordable.
Check Stock

Safariland 6305 ALS Tactical Leg Holster with Detachable Leg Harness, Black, Right Hand, Glock 17 with M3

  • ALS (Automatic Locking System) secures weapon once Holstered..
  • Simple Straight up Draw after deactivating the release.
  • Standard double strap leg shroud with mounting holes for optional accessories.
  • Safari laminate Thermal Molded construction protects the handgun and sights.
  • (ALS ) Automatic Locking System secures weapon once holstered (includes SLS hood assembly and Hood Guard).
  • Adjustable vertical leg strap, standard double leg strap and leg shroud with mounting holes for optional accessories.
  • Simple straight up draw once all releases are de-activated.
  • Mounted to the same leg shroud assembly as the popular 6004 series.
  • Adjustable vertical leg strap with quick release detachable leg strap.
Check Stock

Drsn TV Base Pedestal Feet TV Stand Mount Legs for Televisions with Mounting Holes Distance 2.16in/5.5cm or within 1.77in/4.5cm, Distance between Top Mounting Hole and Edge 3.15in/8cm

  • 1.UNIVERSAL COMPATIBILITY：Tabletop TV replacement base works with Sony, LG, Sharp, Insignia, Vizio, Haier, Toshiba, Sharp, Element, TCL, Westinghouse TVs..
  • 2.ATTENTION：This TV leg does not work with all TVs,So pls make sure there has 2 mounting holes on the left and right side of the back of the TV near the bottom,and mounting holes distance exactly 2.16in/5.5cm or less than 1.77in/4.5cm..
  • 3.EASY TO INSTALL：Simple TV installation takes only a few minutes and comes with the necessary hardware..
  • 4.HEAVY DUTY CONSTRUCTION AND STABILITY：TV Base Pedestal is made of nice aluminium alloy to support up to 99 lbs on the flat screen panel TVs..
  • 5.NO SCRATCH：High quality padding under the leg base protects the top surface of your desk, dresser, cabinet top, or entertainment center..
Check Stock

Safariland 6304 ALS Tactical Leg Holster, Black, Right Hand, 1911 Style with Rails

  • ALS (Automatic Locking System) secures weapon once Holstered..
  • Simple Straight up Draw after deactivating the release.
  • Standard double strap leg shroud with mounting holes for optional accessories.
  • Safari laminate Thermal Molded construction protects the handgun and sights.
  • (ALS ) Automatic Locking System secures weapon once holstered (includes SLS hood assembly and Hood Guard).
  • Adjustable vertical leg strap, standard double leg strap and leg shroud with mounting holes for optional accessories.
  • Simple straight up draw once all releases are de-activated.
  • Mounted to the same leg shroud assembly as the popular 6004 series.
  • Thermal-molded SafariLaminate construction protects handgun and sights.
Check Stock

Btibpse Mounting Plates for Wood Furniture Legs Sofa Legs Attachment Plates with Hanger Bolts Screws Set of 4 (Black)

  • The strong metal mounting plates are made of premium metal, can hold up the furniture well, and extend the life of your bench, couch, dresser, end table, and ottoman..
  • 4 pieces of 5/ 16 inch (M8) hanger bolts,4 pieces mat..
  • Furniture Leg Mounting Plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place.
  • Furniture repairing replacement: this furniture leg mounting plate can attach legs to new or damaged sofas, couches, seats, ottomans, etc..
  • Easy to install and time saving, no need to buy hanger bolts and screws..
Check Stock

MAKEOMG Folding Adjustable Position Assist Chair Portable Couples Mount Stool Elastic Furniture for Bedroom Bathroom Bear Weight up to 300 pounds

  • MONEY SAVER - Table Leg Hardware Replacement Kit For Furniture Wood Feets Is Big Money Saver As It Comes With All The Things You Need To Replacement Legs For Couch Or Your Furniture Leg M8 Screw And Cap, 4 Felt Pads, 4 Metal Pads(T Nuts Bracket Plate), 2 Drills Bits(12mm, 3mm).
  • HARDWARE FOR FURNITURE REPLACEMENT LEGS - This Furniture Leg Mounting Kit Can Attach Legs To Any Sofas, Couches, Seats, Dresser Or Ottomans. The Leg Mounting Kit Comes With Right 2 Size Drill Bits To Replace Your Furniture Legs Easily and Quickly..
  • 2 DRILLS BITS - Furniture Feet Set Comes With 2 Drills Bits (12mm, 3mm) Which Saves Time And Money And Makes Replacement Furniture Legs Easy And Fast. 12mm Drill Helps You To Make Exact Hole For Wood Legs And 3mm Is Perfect For Screws..
  • ALL ON ONE KIT - 2 Drills Bits (12mm, 3mm), T Nuts Round (Metal Pads) M8 Screw, 3M Felt Pads Makes It Perfect All In One Table Leg Mounting Hardware Kit..
Check Stock

Game Room Guys Mounting Plate for Pool Table Leg Leveler

  • POOL TABLE LEG LEVELER MOUNTING PLATE - Critical to the Proper Function of Leg Levelers.
  • THREADED PLATE - This threaded base plate is the mounting plate necessary to secure your pool table leg leveler to the table..
  • DIMENSIONS - 2" W x 1/4" H x 1-1/2" Diameter.
Check Stock