Reviews Flat Exhaust Clamp

SPEEDWOW 2.5 Inch 2 1/2 Butt Joint Exhaust Clamp Band Coupler Sleeve Stainless Steel 2 PCS

  • Exhaust clamp is used for 2.5 Inch OD to 2.5"OD exhaust pipe/muffler/catalytic converters connection,ect. Joint your exhaust tubing together quickly....
  • No welding design makes exhaust clamp fast, easy and accurate installation. Arc curved face,capability prevent exhaust gas and noise leaks. Exhaust....
  • The reaction block provides a full 360 °equal distribution of stretching forces, prohipiting pipe distortion while complesing a seal round the joined....
  • Application:Butt joint Exhaust Clamp suitable for exhaust system, muffler, stainless steel material, not easy to rust, corrosion resistance..
  • WARRANTY - SPEEDWOW provide 2 1/2 inch Exhaust Band Clamp with 5-month warranty.Any product problem, please feel free to contact us..
Check Stock

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock

ZOENHOU 4 PCS 2 Inch Butt Joint Exhaust Band Clamp, 304 Stainless Steel Exhaust Band Clamp Sleeve for Exhaust Pipe, Muffler, Headers, Manifolds, Coupler

  • PREMIUM MATERIAL - The 2 inch exhaust clamp is made from high quality 304 stainless steel, stainless steel material, not easy to rust, corrosion-resistant. Precision-machined, shiny surface with no burr. Inside diameter: 2 inches..
  • EASY INSTALLATION - Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect. It is removable, without welding, and saving time and effort..
  • WIDE RANGE OF APPLICATIONS - Butt joint exhaust clamp suitable for the exhaust system, pipes, muffler. Arc curved face, capability prevent exhaust gas and noise leaks. The exhaust band clamp is reusable without damaging the pipes..
  • PERFECT DESIGN - Our exhaust pipe clamp for exhaust provides a 360-degree full clamping area to generate overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections!.
  • WORRY-FREE SHOPPING - Please do not hesitate to contact us if any issues with our exhaust band clamp sleeve, you can get 30 days of worry-free refund, 7 days of 24-hour service after receiving it. Just remember that your satisfaction is our first priority..
Check Stock

2" Exhaust Clamps Narrow Band Muffler Seal Clamp Exhaust Tip, Exhaust Resonator, Exhaust Manifold, Exhaust Flex Pipe, Project Catalytic Converter Repair Stainless Steel 2.0 inch 2PCS

  • 【Application】Seal exhaust clamp is the muffler repair part, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold, Exhaust Resonator, Exhaust Flex Pipe, Exhaust Muffler Repair Projects..
  • 【Function】The narrow band clamp adds the mild steel semi-circular gasket parts, it can hold the pipe tightly without loosening. Distributes the cla amping force evenly over the entire 360° to prevent leaks and control material distortion. Unique seal and high clamp loads are provided, without distorting your exhaust components, allowing the flexibility to disassemble for service..
  • 【Easy to Install】Easy and less time consuming to install or remove with one bolt. This exhaust clamp is adjustable, has been tested for strength, and is reusable without damaging the pipes..
  • 【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Roadformer 2.5 Butt Joint Exhaust Band Clamp - Aluminized Steel for 2.5 OD Exhaust Pipe Muffler Elbow and Exhaust Tubing Connection

  • PREMIUM QUALITY STANDARD – 2.5" butt joint exhaust clamp is made in high quality standard, this band clamp is used for 2.5" OD to 2.5" OD exhaust....
  • REAL SEALING CAPABILITY - Roadformer 2.5" exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, Pre-attached....
  • DURALITY & RELIABILITY - exhaust clamp band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior....
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and....
Check Stock

UANOFCN 1998 and Up Exhaust Y-Pipe Kit Replaces 807166A1 Hose Bellows 32-14358T 32-44348T for Mercruiser

  • We ship from the USA, it is fast and guaranteed..
  • Replaces 807166A1 Water Shutters / Flappers 32-14358 , 32-14358T , 32-14358001 , 18-2746 Lower Exhaust Bellows , Tube , Hose，Clamp.
  • Also Replaces 32-44348 , 32-44348T , 32-44348001 , 18-2748 Upper Exhaust Bellows , Tube , Hose，Clamp.
  • Note: These will not work on V6 engines that came with the one piece manifolds ( use 807166A2 it has a flat tip ) , or early V8 with the round pin....
  • 100% Brand New With High Quality.Cooperated with local workshop, quality is guaranteed..
Check Stock

Roadformer 5 inch Exhaust Clamp - Lap Joint Exhaust Band Clamps Preformed Stainless Steel (2 Pack)

  • 5" exhaust clamp is to joint 5" OD overlapping into 5" ID. Stainless Steel Band in the width of 3 inch/76 mm, using 12.9 degree high-strength fasteners.
  • Lap joint exhaust clamp is fast, easy and accurate installation, and minimize noise and exhaust gas leak, protect exhaust ends from damaged when fastening.
  • The stepped band stainless steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Exhaust clamp will come with plastic sticker to protect the band.
  • you can use with it or you can remove the protection sticker off before using.
Check Stock

Roadformer 2.5" Lap Joint Exhaust Band Clamp Preformed Aluminized Steel

  • Roadformer 2.5" exhaust clamp is to joint 2.5" OD pipe overlapping into 2.5" ID pipe. It is fast, easy and accurate installation, also minimize noise and exhaust gas leak. The lap joint Clamp is widely used in exhaust system of Automotive, Commercial Vehicle and off high way industry..
  • This stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Roadformer is dedicated in providing real value to our customers and end users. We set industry quality standard.
Check Stock

DNA Motoring WG-TS-40MM-T11-BK External Turbo Manifold Wastegate Black

  • Application: V band clamp work very well in operating conditions involving stress, vibration and extreme temperature fluctuations,such as exhaust....
  • DESIGN:Each assembly consists of two Mild Steel Flat flanges and one 304 Stainless Steel V-band clamp,providing a perfect overlap seam for welding.The....
  • ADVANTAGE: One of the advantages of using a V-Band clamp is that these retainers are perfect for applications requiring frequent removal. They provide....
  • ADVISE: You can use a drop of anti-seize on the clamp’s retaining nut. This helps extend the life of the clamp and protects the ability of the....
  • The 2.5" v band clamp have 3-month warranty.No instruction included, Professional installation is highly recommended.We value your shopping experience....
Check Stock

SYKRSS 3 Stainless Steel Butt Joint Narrow Band Exhaust Seal Clamp with 1 Block

  • Application: Seal exhaust clamp is the muffler repair parts, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold,....
  • Universal fitment, Joins 3.0" OD pipe to 3.0" ID pipe, There are 5 sizes for choose, it can meet your various needs. Please measure the size of your....
  • The narrow band clamp add the mild steel semi-circular gasket parts, it can hold the pipe tightly without loosening. The I-shape block again enhances....
  • Easy to remove and install, the exhaust band seal clamp chose the design of flexible bolt and nut structure. can easily disassemble and install them.....
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 3.0" narrow band clamp, you can feel free to contact us via....
Check Stock