Reviews Flash Butt Welding Equipment

Butt Welding Clamps, Sturdy Durable 16pcs Butt Welding Clamps ,for Sheet Metal Auto Car Truck Door Skin Panel, for Precision Butt Welding and Edge to Edge Welding(16pcs)

  • High-quality and durable:This set of clips has excellent performance in precision butt welding and edge-to-edge welding. The butt welding tongs are made of galvanized steel, rust-proof, heat-resistant and durable. The smooth metal surface prevents rust, is not easy to deform, and has a long service life..
  • Professional welding clamp tools:Each welding square tool tube clamp can extend the clamp block, leaving a 0.040 inch (1cm) gap between the panel and the edge welding. Suitable for straight or curved plates. The minimum gap of the welding plate is about 1 mm, which can be adjusted to a farther position as needed..
  • Good performance: These clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Professional use:Sheet metal welding tongs are designed for welding operations. Very suitable for welding cracked metal floors, automotive sheet metal surfaces, door skins or prefabricated panels assembled in re-skinning projects. These clips can fix panels of any shape anywhere..
  • Easy to use:After spot welding the two panels together, remove the wing nut release device and toggle, just remove the fixture from the work befor....
Check Stock

VIZ-PRO 3 Panel Green Vinyl Welding Curtain/Welding Screen With Frame, 6' x 6'

  • Easy-Slide slip-fit connection permits quick and easy assembly without tools.
  • Protect workers, material, and equipment from hazards of welding sparks, spatter, and UV flash..
Check Stock

PSCCO 4PCS Butt Welding Clamps Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • A set of 4 Intergrips firmly fix the flat or curved panel edge-to-edge and surface-to-surface to achieve a good clean connection..
  • The welding clamp is made of galvanized steel, which can prevent rust and is easy to install or disassemble..
  • Butt welding tongs can fix workpieces for precise butt welding and side-to-side welding..
  • A large number of fixtures suitable for any welding kit. The gap between the board and the board is maintained at 0.40 inches for edge-to-edge welding..
Check Stock

Tillman 1414L 1414 Unlined Cowhide Leather Drivers Glove, Cowhide Leather, Large, White/Yellow (12 Pairs)

  • CUT RESISTANT: Cut proof, Kevlar lined work gloves provide excellent protection against cutting hazards while at the same time being comfortable and allowing full dexterity. Great for construction workers or for someone needing a great pair of yard work gloves..
  • ABRASION RESISTANT: Soft and lightweight, our premium Goatskin cut resistant work gloves have high tensile strength and abrasion-resistant properties..
  • ARC FLASH TESTED: Arc-flash welding glove testing placed these cut proof gloves at level 3, with a rating of ATPV = 36 cal/cm². (Note: these work gloves are designed for spark and flame resistance, not thermal contact.).
  • SAFETY RATINGS: These white leather work gloves are ANSI cut-level A5 and Puncture Resistance ASTM level-3..
  • APPLICATIONS: Cut-resistant work gloves for work in manufacturing, metal handling, general maintenance, construction, forklift drivers, truck drivers, farm equipment, steel plants, welding and yard work..
Check Stock

Wells Lamont Men’s Slip-On HydraHyde Full Leather Work Gloves | Water-Resistant | Medium (1168M)

  • CUT RESISTANT: Cut proof, Kevlar lined work gloves provide excellent protection against cutting hazards while at the same time being comfortable and allowing full dexterity. Great for construction workers or for someone needing a great pair of yard work gloves..
  • ABRASION RESISTANT: Soft and lightweight, our premium Goatskin cut resistant work gloves have high tensile strength and abrasion-resistant properties..
  • ARC FLASH TESTED: Arc-flash welding glove testing placed these cut proof gloves at level 3, with a rating of ATPV = 36 cal/cm². (Note: these work gloves are designed for spark and flame resistance, not thermal contact.).
  • SAFETY RATINGS: These white leather work gloves are ANSI cut-level A5 and Puncture Resistance ASTM level-3..
  • APPLICATIONS: Cut-resistant work gloves for work in manufacturing, metal handling, general maintenance, construction, forklift drivers, truck drivers, farm equipment, steel plants, welding and yard work..
Check Stock

Superior Goatskin Leather Work Gloves - Kevlar Lined Cut Resistant, Arc Flash Safety Work Gloves (Endura-378GKTFG) Large

  • CUT RESISTANT: Cut proof, Kevlar lined work gloves provide excellent protection against cutting hazards while at the same time being comfortable and allowing full dexterity. Great for construction workers or for someone needing a great pair of yard work gloves..
  • ABRASION RESISTANT: Soft and lightweight, our premium Goatskin cut resistant work gloves have high tensile strength and abrasion-resistant properties..
  • ARC FLASH TESTED: Arc-flash welding glove testing placed these cut proof gloves at level 3, with a rating of ATPV = 36 cal/cm². (Note: these work gloves are designed for spark and flame resistance, not thermal contact.).
  • SAFETY RATINGS: These white leather work gloves are ANSI cut-level A5 and Puncture Resistance ASTM level-3..
  • APPLICATIONS: Cut-resistant work gloves for work in manufacturing, metal handling, general maintenance, construction, forklift drivers, truck drivers, farm equipment, steel plants, welding and yard work..
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Strong Hand Tools CPL45 , Pipe Fit-Up Clamp, Pipe Welding Alignment Tools (Pipe Diameter Capacity: 2″ ~ 4″ (50~100 mm))

  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding. Easy-to-use design for the rapid, repeated loading and unloading of work pieces..
  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding..
  • Easy-to-Use design for the rapid, repeated loading and unloading of workpieces..
Check Stock

VIZ-PRO Green Vinyl Welding Curtain/Welding Screen, 6' x 6'

  • Easy-Slide slip-fit connection permits quick and easy assembly without tools.
  • Protect workers, material, and equipment from hazards of welding sparks, spatter, and UV flash..
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock