Reviews Flash Bracket Screw

ChromLives Camera L Bracket Mount Video Grip L-Bracket with Dual Flash Cold Shoe Mount 1/4'' Tripod Screw, Heavy Duty Padded Hand Grip for DSLR Camera Camcorder (Updated)

  • This is a heavy duty photography video camera L bracket with dual flash cold shoe mounts,1/4” thread hole on top,and 1/4” tripod screw on base plate for any standard camera or camcorder.This camera L bracket allows you to attach a light source to the hot shoe, which sets the light source away from the camera. This helps reduce red eye and reduce harsh shadows..
  • REMOVABLE COLD SHOES-This L bracket is updated with two solid removable flash shoe mounts for added light source, Far exceeds the built-in shoe mount version which will risk your delicate flash/monitor to slide off. Provides an economical way to do both horizontal and vertical flash..
  • UNIVERSAL 1/4” SCREW- Updated with an extra 1/4” screw hole between the two cold shoe mount for more configuration. Comes with a 1/4”-20 thumb screw to connect your camera camcorder,action camera etc,. 1/4” threaded hole on the bottom of the thumb screw.
  • ERGONOMICS HAND GRIP- Smart padded hand grip design for easy holding. Strong construction..
  • SOLID MADE- The l shape bracket is made of high quality aluminum metal and padded grip is made of hard plastic. Heavy duty and strong..
Check Stock

Neewer Two(2) Pack of Durable Pro 1/4\ Mount Adapter for Tripod Screw to Flash Hot Shoe

  • This adapter permits the devices with standard 1/4" screw hole to be installed on flash hot shoe slot. It includes 2 nuts which can be adjusted..
  • It can install NIKON SC-28 Flash Sync Cord to VH2000 Camera Flash Bracket Grip. It can install YONGNUO CTR-301P Flash Remote Trigger to Flash Shoe Umbrella Holder Stand Bracket..
  • 2 pack of 1/4" tripod screw to flash shoe mount adapter.
Check Stock

Anwenk Camera Flash Speedlite Mount Swivel Light Stand Bracket with Umbrella Reflector Holder for Camera DSLR Nikon Canon Pentax Olympus and Other DSLR Flashes Studio Light LED Light, 1Pack

  • Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder..
  • Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
  • A hole with locking screw in middle specially designed for holding umbrella..
  • Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle..
  • Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread. Note: This flash bracket is not ideal for sony minolta godox shoe system..
Check Stock

SUPON Super Clamp + Mini Ball Head Bracket Mount + 1/4' to 1/4' Screw and 1/4' to 3/8' Screw for Rig,Monitor,DSLR,Backdrop,Flash,LED Light,Light Stand,Bike,Motorcycle,Rod,Tripod,Action Cameras

  • SUPON Super Clamp is can fix on to any shaped body like cameras, lights, umbrellas, hooks, shelves, plate glass, bike, motorcycle, Rod, tripod, monopod, cross bars,etc. Combine with Ball Head Mount,it could attach and detach from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting..
  • Comes with a mini Ball head Mount, with 1/4 inch Screw Mount, uses to mount accessories onto a flash bracket.
  • 360-degree articulation,Ball head can be adjusted into most position, makes you a comfortable use. Perfect for DSLR Film Movie Rig, Monitor, Flash, LED Lights, Track Slider, Light Stand, Action Camera, etc..
  • 1/4" To 3/8" Screw&Nut Adapter- The detachable 1/4" to 3/8" screw socket at the bottom, which can be converted by yourself, allow the U shape flash bracket to attach to a tripod or light stand. Note: Received the flash bracket with the convert screw. Release the screw to get 1/4” thread or 3/8” thread..
  • Metal construction with black anodized for higher durability..
  • Non-slip rubbers on the inner side provides strength and stability. Maximum opening diameter: 2.16". Ideal for clamping items 0.6"-1.73" in diameter..
Check Stock

Socobeta Adjustable with 1/in Thread Dual Hot Shoes Holder Mount Adapter Bracket Screw Mount Useful Full-Protective Camera Flash L-Bracket for Camera

  • WITH TWO HOT SHOES：Dual hot shoes holder mount is equipped with two hot shoes, offering multiple combination for mounting flash with other accessories, you can adjust it according to your equipment needs..
  • BEST GIFT FOR FRIENDS：If you have friends who love photography or are often engaged in photography, you can give camera l bracket mount video grip l bracket ring to them, and they will be very happy. Of course, you can also prepare for your child..
  • STANDARD 1/4IN SCREW THREAD：The international standard 1/4in screw thread fits most cameras and camcorders. L shape design is good for horizontal or vertical shooting with a comfortable handle..
  • STURDY AND DURABLE：Camera flash L-bracket is made of the quality material, lightweight, sturdy and durable. Moreover, the service life of the bracket is longer than that of the general bracket..
  • EASY INSTALLATION：The installation method of the flash bracket mount is very simple, you only need to install it according to the correct installation method, l bracket camera mount is very simple and easy to learn..
Check Stock

UTEBIT Flash Light Bracket 12in Upgraded Straight Speedlite Extension Mount Bar with 1/4 Screw Hot Shoe Tripod DSLR Holder for LED Light Microphone

  • 【Size and Material】 The length of the straight flash Bracket is 30.3cm/11.8in. Compared with similar regular products, this camera bracket is longer, flash extension bracket made of aluminum alloy, sturdy and durable, with strong load-bearing capacity..
  • 【Ingenious design】There are standard 1/4-inch and 3/8-inch screw holes in the middle of the dual flash bracket, which can be installed on a camera or a light stand..
  • 【Easy to carry】 The size of the dual camera mount is convenient to carry, suitable for use in various occasions, and is an indispensable important equipment for photographers..
  • 【Advantage】Compared with other similar dual camera mount that can only install one camera and one flash, our dual flash bracket can install two cameras and two flashes (or two other photography accessories) at the same time, ensure balance to meet different shooting needs..
  • 【Application】 Flash bracket meets the needs of multi-functional expansion, suitable for dual camera shooting, or match with video lights, fill lights, microphones etc at the same time..
Check Stock

Neewer Universal E-Type and S-Type Bracket Holder with Bowens Mount for Speedlite Flash Snoot Softbox Beauty Dish Reflector Umbrella Photo Studio

  • KIT INCLUDES: (1)S-Type Bracket Holder with Bowens Mount, (1)E-Type Bracket Holder, Suitable for Speedlite Flash Snoot Softbox Beauty Dish Reflector....
  • S-TYPE SPEEDLITE BRACKET: Great combination of L-type and T-type speedlite mounts and improved from them.
  • Smaller size, lighter weight, less space....
  • BOWEN MOUNT DESIGN AND FURTHER SUPPORT: Bowens mount design facilitates most studio flash accessories, such as softboxes, reflectors, beauty dishes....
  • E-TYPE SPEEDLITE BRACKET: The bracket has screw fittings for the flash mount, umbrella and tripod mount.
  • This bracket is an inexpensive way of....
  • PRACTICAL DESIGN: S-Type Bracket Holder Firm clamp between 2 pieces of soft plastic, no pressure nor metal scratch to your speedlite, E-Type Bracket....
Check Stock

UTEBIT Dual Flash Bracket Tripod Mount 8\ 20.5cm with 1/4\ Screw & Hot Shoe 2 Pack Video Light Bracket Speedlite Holder for 2 Cameras Compatible for Photography, Studio, LED Light, Stand, Tripod, DSLR

  • 【Dual Flash Bracket】- 2 Pieces dual flash bracket, can install camera and flash stand together, meet different shooting demand..
  • 【Widely Use】- Compatible with camcorder, DSLR camera, video light, fill light, ideal shooting tool for wedding, birthday party, news spot and more..
  • 【Easy to Install】- Max Weight capacity 5 kg, the middle of bracket has 1/4’’ and 3/8’’ thread hole for install with light stand, handle, quick release plate and other photography accessories..
  • 【1/4’’ Screw】- Both the double install mount with 1/4’’ screw hot shoe, distance adjustable from 4-18cm..
  • 【High Quality】- Aluminum material, durable. Ultra-thin design, easy to carry. Size: 250mm*30mm*3mm, weight: 72g..
Check Stock

ChromLives Dual Flash Bracket Hot Shoe Speedlight Stand Umbrella Holder Light Stand Bracket Mount 1/4'' to 3/8'' Compatible with Studio Video DSLR Camera Canon Nikon Yongnuo

  • Light Stand Bracket, Dual Cold Shoe Mount Extension Bar with Umbrella Holder..
  • Dual Flash Shoe Bracket- With double cold shoe mount on an Extension bar. Universal cold shoe mount for most DSLR Camera Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light. (Note:this adapter does not fit Sony and Minolta flash).
  • Umbrella Mount Bracket- A hole design for mounting urbrella. 180° Swivel joint allow vertical adjustment of the umbrella and flash light..
  • Light Stand Bracket- Comes with a 1/4 inch to 3/8 inch screw spigot, allow the light stand bracket to attach to a tripod or light stand..
Check Stock

Vello CB-600 Straight Flash Bracket

  • 【2 Pack Dual Flash Bracket】 with 1/4 standard screw to mount on dslr camera, led light, flash light and more. Perfect for your different demand on shooting..
  • 【Adjustable Flash extension bar】 Adjustable range from 4-18cm. Allowing to attach two devices at the same time. Please check the max adjustable range for your camera or accessories before order..
  • 【1/4’’ and 3/8’’ Thread】 Dual camera mount for tripod comes with 1/4’’ and 3/8’’ thread holes at the center for tripod, light stand, handle grip, quick release plate and other support..
  • 【No-slip Rubber Pad】Dual hot shoe mount 1/4’’ screw with anti-slip rubber pad. Can protect your camera flash and led light from scratches and slipping..
  • 【High Quality】Made of aluminum material, very sturdy and durable. Dimensions: 20.3cm*2.8cm*0.5cm. Weight: 72g..
Check Stock