Reviews Flash Bracket Arm

UTEBIT Flash Light Bracket 12in Upgraded Straight Speedlite Extension Mount Bar with 1/4 Screw Hot Shoe Tripod DSLR Holder for LED Light Microphone

  • 【Size and Material】 The length of the straight flash Bracket is 30.3cm/11.8in. Compared with similar regular products, this camera bracket is longer, flash extension bracket made of aluminum alloy, sturdy and durable, with strong load-bearing capacity..
  • 【Ingenious design】There are standard 1/4-inch and 3/8-inch screw holes in the middle of the dual flash bracket, which can be installed on a camera or a light stand..
  • 【Easy to carry】 The size of the dual camera mount is convenient to carry, suitable for use in various occasions, and is an indispensable important equipment for photographers..
  • 【Advantage】Compared with other similar dual camera mount that can only install one camera and one flash, our dual flash bracket can install two cameras and two flashes (or two other photography accessories) at the same time, ensure balance to meet different shooting needs..
  • 【Application】 Flash bracket meets the needs of multi-functional expansion, suitable for dual camera shooting, or match with video lights, fill lights, microphones etc at the same time..
Check Stock

Updated Anwenk Flash Cold Shoe Mount Adapter Flash Shoe Mount Flash Stand Adapter with 1/4\-20 Tripod Screw Thread for Camera Flash Nikon Canon Olympus Panasonic Speedlite Flash, 2Pack

  • Updated Cold Shoe Flash Stand Adapter. Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
  • Updated: NO SPRING. Never have to worry about the springs falling out again. That makes your expensive flash be held tightly and safely not by the springs lock, but your hot shoe locking wheel.(Your accessories should have hot shoe locking wheel in order to lock down to this cold shoe mount)..
  • Universal 1/4" Tripod Screw -Metal cold shoe to mount your flash onto bracket or tripod/light stand..
  • Smart Design - With a stop screw on the shoe mount adapter to prevent shoe mount accessories from accidentally sliding forward and keep your accessories silde Perfectly in right place..
  • Material: Metal construction with black anodized for higher durability..
Check Stock

Neewer Universal E-Type and S-Type Bracket Holder with Bowens Mount for Speedlite Flash Snoot Softbox Beauty Dish Reflector Umbrella Photo Studio

  • KIT INCLUDES: (1)S-Type Bracket Holder with Bowens Mount, (1)E-Type Bracket Holder, Suitable for Speedlite Flash Snoot Softbox Beauty Dish Reflector....
  • S-TYPE SPEEDLITE BRACKET: Great combination of L-type and T-type speedlite mounts and improved from them.
  • Smaller size, lighter weight, less space....
  • BOWEN MOUNT DESIGN AND FURTHER SUPPORT: Bowens mount design facilitates most studio flash accessories, such as softboxes, reflectors, beauty dishes....
  • E-TYPE SPEEDLITE BRACKET: The bracket has screw fittings for the flash mount, umbrella and tripod mount.
  • This bracket is an inexpensive way of....
  • PRACTICAL DESIGN: S-Type Bracket Holder Firm clamp between 2 pieces of soft plastic, no pressure nor metal scratch to your speedlite, E-Type Bracket....
Check Stock

Impact Deluxe Umbrella Mount with Adjustable Shoe -

  • 180 DEGREE TILT and 360 DEGREE SWIVEL - Impact light stand bracket can tilt 180 degrees and swivel 360 degrees, allowing you to aim your flash or....
  • SPACE SAVING MOUNTING OPTIONS - Useful and versatile addition to any photography umbrella lighting kit.
  • this umbrella and flash bracket mount features....
  • MADE OF PREMIUM ALUMINUM ALLOY - This sturdy camera flash bracket is durable and can take a lot of beating, making it a....
  • MULTIPLE ADJUSTMENTS and SUITABILITY - Impact speedlight mount is a good alternative for mounting small light fixtures. It can be installed on any....
  • 1-YEAR WARRANTY - Unlike many flimsy, all-plastic competitors, our umbrella and flash holder is long-lasting and super....
Check Stock

SUPON Flash Bracket U-Shape,180° Adjustable Swivel Umbrella Softbox Holder with 1/4 to 3/8 Screw &Nut Adapter and Cold Shoe Mount for DSLR Cameras,Speedlites,Tripod,Light Stand,Studio,LED Light

  • Special Design- This flash bracket can attach on your light stand and flash light, insert your photography umbrella or Softbox and adjust your angle....
  • Umbrella/Softbox Mount Bracket- A hole with locking screw in middle specially designed for holding umbrella or softbox. Allows 180° swivel to adjust....
  • 1/4" To 3/8" Screw&Nut Adapter- The detachable 1/4" to 3/8" screw socket at the bottom, which can be converted by yourself, allow the U shape flash....
  • Cold Shoe Mount Bracket- Come with a cold shoe mount on top design fits DSLR camera flash speedlites or video LED light, studio light, monitor, ring....
  • Durable- The flash bracket is made of whole aluminum alloy,durable and solid to use..
Check Stock

Chamberlain 41A5250 Garage Door Opener Drive Belt Genuine Original Equipment Manufacturer (OEM) Part

  • GARAGE DOOR OPENER BRACKET - Ideal garage door parts included in this bundle: 1 garage door replacement bracket, 1 clevis pin, 1 cotter pin and 3 self tapping sheet metal screws/fasteners. Installation instructions are included..
  • GENIE GARAGE DOOR PARTS - This garage door parts bracket is used to attach the curved door arm, straight door arm and carriage assembly to the garage door. This bracket allows the operator to open and close the garage door..
  • GARAGE DOOR BRACKET REPLACEMENT - Garage door reinforcement kit - fits most brands genie, liftmaster, sears, craftsman. Same as 19792A04, 19782, 19792A, 19792A04.S, 19792B. Universal door bracket to connect door to door arm..
  • "GARAGE DOORS PARTS - Recommended to attach the bracket to the sectional door and install a piece of corner metal behind the style to which the garage door mounting bracket is attached to reinforce the style to which the opener will be attached. ".
  • GARAGE DOOR BRACE - This universal garage reinforcement bracket is easy to install, attaches to your garage door for use with any model of garage door opener. Check your garage door owner's manual for installation recommendations..
Check Stock

Neewer Two(2) Pack of Durable Pro 1/4\ Mount Adapter for Tripod Screw to Flash Hot Shoe

  • This adapter permits the devices with standard 1/4" screw hole to be installed on flash hot shoe slot. It includes 2 nuts which can be adjusted..
  • It can install NIKON SC-28 Flash Sync Cord to VH2000 Camera Flash Bracket Grip. It can install YONGNUO CTR-301P Flash Remote Trigger to Flash Shoe Umbrella Holder Stand Bracket..
  • 2 pack of 1/4" tripod screw to flash shoe mount adapter.
Check Stock

ChromLives Dual Flash Bracket Hot Shoe Speedlight Stand Umbrella Holder Light Stand Bracket Mount 1/4'' to 3/8'' Compatible with Studio Video DSLR Camera Canon Nikon Yongnuo

  • Light Stand Bracket, Dual Cold Shoe Mount Extension Bar with Umbrella Holder..
  • Dual Flash Shoe Bracket- With double cold shoe mount on an Extension bar. Universal cold shoe mount for most DSLR Camera Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light. (Note:this adapter does not fit Sony and Minolta flash).
  • Umbrella Mount Bracket- A hole design for mounting urbrella. 180° Swivel joint allow vertical adjustment of the umbrella and flash light..
  • Light Stand Bracket- Comes with a 1/4 inch to 3/8 inch screw spigot, allow the light stand bracket to attach to a tripod or light stand..
Check Stock

Socobeta Adjustable with 1/in Thread Dual Hot Shoes Holder Mount Adapter Bracket Screw Mount Useful Full-Protective Camera Flash L-Bracket for Camera

  • WITH TWO HOT SHOES：Dual hot shoes holder mount is equipped with two hot shoes, offering multiple combination for mounting flash with other accessories, you can adjust it according to your equipment needs..
  • BEST GIFT FOR FRIENDS：If you have friends who love photography or are often engaged in photography, you can give camera l bracket mount video grip l bracket ring to them, and they will be very happy. Of course, you can also prepare for your child..
  • STANDARD 1/4IN SCREW THREAD：The international standard 1/4in screw thread fits most cameras and camcorders. L shape design is good for horizontal or vertical shooting with a comfortable handle..
  • STURDY AND DURABLE：Camera flash L-bracket is made of the quality material, lightweight, sturdy and durable. Moreover, the service life of the bracket is longer than that of the general bracket..
  • EASY INSTALLATION：The installation method of the flash bracket mount is very simple, you only need to install it according to the correct installation method, l bracket camera mount is very simple and easy to learn..
Check Stock

BW USA Bicycle Crank Puller – Crank Removal Tool for Mountain and Road Bikes with Square Taper Bottom Bracket Spindles

  • ...If for any reason you wish to discontinue using the product, we will promptly issue a refund..
  • MUST HAVE TOOL – An essential tool for home bike mechanics and cycling enthusiasts who are looking to save money by doing their own bicycle maintenance – Required tool to remove crank arms and gain access to the bottom bracket which may have come loose and resulted in creaking and/or wobbling.
  • COMPATIBILITY – Compatible with square tapered bottom bracket spindles – Not suitable for Octalink or ISIS bottom brackets – Not sure what bottom bracket type your bikes has? Remove the crank fixing bolt which attaches the crank arm to the spindle. If the shape of the axle that you see is square then this is the correct tool for your bike.
  • QUALITY CONSTRUCTION – Quality tool made from heat-treated steel to ensure years of use.
  • SIMPLE TO USE – 1. Remove the crank arm fixing bolt (either 8mm hex or 14mm socket depending on the bike) from the crank arm - 2. Use a 15mm spanner (open end wrench, crescent wrench or something similar) to thread the bottom bracket tool to the bicycle crank - 3. Attach an 8mm hex wrench to the end of the bottom bracket tool and rotate clockwise until the crank arm is freed from the bottom bracket spindle.
Check Stock