Reviews Flange Ansi B16 5

Anderson Metals 56120-0806 Brass Pipe Fitting, Adapter, 3/8' Male Pipe x 1/2' Female Pipe

  • Adapter for connecting pipes or fittings of different types.
  • Male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for connecting pipes with different ends. Please see NPT Thread - chart to determine the correct size required. Pipe Size and actual Thread OD are different. The Thread OD is larger than the Pipe Size..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Proline Frost Proof Sillcock 1/2 " Copper,12 " L,3/4 " Mht Chrome Plated

  • Prevents outside faucet freezing. Chrome-plated brass body and tube. Lead-free silver solder construction. Built-in lock-shield. 3/4" hose thread outlet..
  • The sillcock drains automatically upon water shut off, if the hose is removed or open. 1/2" nominal copper sweat or 1/2" M.I.P. Import. The sillcock drains automatically upon water shut off, if the hose is removed or open..
  • 1/2 in MIP x 1/2 in Sweat. Heavy chrome plated brass, silver soldered construction. Notched flange for stable installation. Chrome plated casting and tube, lock shield, 3/4 in hose thread outlet, heavy cast iron handle..
  • Pipe threads comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, solder connections comply with ANSI B16.18. CSA certified ANSI/NSF 61-9. UPC coded. Bulk handy carton..
  • Prevents outside faucet freezing. Chrome-plated brass body and tube. Built-in lock-shield. 3/4in hose thread outlet. The sillcock drains automatically upon water shut off, if the hose is removed or open..
Check Stock

M10 x 1.5mm Flange Nuts, binifiMux Diameter 10Pcs Serrated Hex Flange Lock Nuts 304 Stainless Steel

  • Made of 18-8 (A2) stainless steel 18-8 which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
  • Serrations help grip the material surface for easy installation and provide mild vibration resistance..
  • Nuts Height: 0.17 inch, Flange Diameter: 0.42 inch.
Check Stock

Brass Pipe Fitting Coupling-1/2 x 1/2 NPT Female Chrome Plated Finish Brass Pipe Fitting Coupler with 1 Roll Copper Joint Thread Sealing Tape for Home Plumbing Pipes 1pcs-Chrome Plated

  • 【MATERIAL】Our brass pipe fitting coupling is made of premium solid brass with chrome plated finish.chrome plated brass for corrosion resistance,....
  • 【APPLICATION】Our brass pipe fitting coupling can apply to water, oil and fuel, LP and natural gas, and be used to connect various pipes as well as....
  • 【STANDARD】Our brass pipe fitting coupling meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance..
  • 【FUNCTION】1/2" female x 1/2" female NPT threads equal diameter hex nipple for connecting two female threaded pipes with same diameters. Or....
  • 【SERVICE】Our QC department do 100% quality inspection on the brass pipe fitting coupling before delivery. We will do 100% refund if brass pipe....
Check Stock

ISOtunes Wired Earplug Headphones, Recently Improved, 29 NRR, Noise Cancelling Mic, IPX5 Waterproof, Ultra-Durable Braided Wire, OSHA Compliant Noise Isolating Earbuds

  • ❎ BLOCK NOISE: ISOtunes proprietary TRILOGY heat-activated memory foam eartips maximize noise isolation, comfort, and sound quality. ISOtunes Wired comes with 3 pairs of foam eartips, 2 pairs of triple-flange silicone eartips, and 2 pairs of single-flange silicone eartips. Also includes snap-shut travel case..
  • ☑️ CERTIFIED HEARING PROTECTION: ISOtunes Wired hearing protection headphones are ANSI-certified and OSHA-compliant with a 29 dB Noise Reduction Rating (NRR) and ISOtunes 82 dB SafeMax Technology..
Check Stock

Lamerto OBD2 Budget D & B-series Tucked Engine Harness for Ci-vic Integra B16 B18 D16

  • Lamerto Engine Harness CNCH-OBD2-1 Replacement for Hon-da Ci-vic / Inte-gra B16 B18 D16.
  • Will fit for following models: Hon-da Ci-vic Inte-gra B16 B18 D16.
  • Please carefully check the OEM part number and illustrations to make sure it is compatible with your car..
Check Stock

JET 2-HDT 2-Ton Manual Trolley 262020

  • SAFETY: Built-in bumper guards on the side plates increase safety, and extend trolley life..
  • VERSATILITY: Easily adjusts to wide-flange H-beams, standard I-beams, or curved track..
  • DURABILITY: Welded all-steel frame and powder coat finish provide maximum protection..
  • CERTIFICATION: Load-tested to 125% of capacity with certificate..
  • COMPLIANCE: Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards..
Check Stock

Mr Shave B-Series B16 B17 B18 VTEC Low-Profile Slim Valve Cover Hardware Washer Bolt Color Black

  • For Acura and for Honda B-Series Vtec Low Profile Aluminum Valve Cover Washer.
  • Complement your Low-Profile Valve Cover Hardware with Lower Control Arm Dress-Up Washers. For Vtec Engines only..
  • Fit B-Series - B16A2 / B16A3 / B17A1 / B18C1 / B18C5.
  • High performance, meets or exceeds OEM standards, 100% tested before shipping.
  • Compatible for OEM Valve Covers As Well As OEM And Most Aftermarket Spark Plug Wire Covers.
Check Stock

Dewhel B-SERIES B16 B17 B18 VTEC LOW-PROFILE SLIM VALVE COVER HARDWARE WASHER BOLT Color Black

  • Compatible with Acura / Honda B-Series Vtec Low Profile Aluminum Valve Cover Washer.
  • Complement your Low-Profile Valve Cover Hardware with Lower Control Arm Dress-Up Washers. For Vtec Engines only..
  • Fit B-Series - B16A2 / B16A3 / B17A1 / B18C1 / B18C5.
  • Made By OEM Approved and ISO Certified Manufacturers With Materials That Meets Or Exceeds Strict OEM Requirements.
  • Compatible With OEM Valve Covers As Well As OEM And Most Aftermarket Spark Plug Wire Covers.
Check Stock

TASAN RACING B-Series B16 B17 B18 VTEC Low-Profile Slim Valve Cover Hardware Washer Bolt Blue

  • Material Type:Made of high quality materials.
  • Fitment:Fit for B-Series - B16A2 / B16A3 / B17A1 / B18C1 / B18C5.
  • Complement your Low-Profile Valve Cover Hardware with Lower Control Arm Dress-Up Washers. For Vtec Engines only..
  • Compatible With OEM Valve Covers As Well As OEM And Most Aftermarket Spark Plug Wire Covers..
  • Packing Include:4 x 67mm Mounting Bolts, 4 x 26mm Mounting Bolts, 4 x 22mm Mounting Bolts, 4 x 11mm Mounting Bolts,12 x Aluminum Washers, 8 x O-Ring Gaskets..
Check Stock