Reviews Flame Resistant Base Layers

BERYA Heat Press Mat-Teflon Heat-Resistant Pad for Heat Press Machines and Craft Vinyl Ironing Projects

  • 5 Layers Technology Mat-It has Teflon heat-resistant cover,flame retardant felt,foil membrane,silicone foam inner and protective bottom barrier seals total 5 layers together to make sure a good quality for lasting use..
  • Heat-resistant-The top layer is made of Teflon,heat-resistant and providing thermal conductivity and even heat distribution.The back layer uses protective bottom barrier seal to protect the surface underneath from heat..
  • Best Protection-The inside 3 layers make for even temperatures over the surface consistently.The flame retardant felt wicks moisture to deliver clean, dry heat.The foil membrane reflects heat and prevents moisture vapor transfer, while the silicone foam provides insulation and shields your surface from damaging heat..
  • Provide A Smooth Surface- A large area that's just firm enough to provide a smooth surface and even contact patch for the press. No more using towels or fading your kitchen table..
Check Stock

Vertigo Cyclone Triple Torch and Jetline Super Torch Triple Flame Cigar Lighters

  • HIGH QUALITY :Top Quality Sturdy Metal Body,Single Flame Torch Lighter with Fuel Level Window, universal Refill Valve..
  • BUTANE REFILLABLE: Flame Height Adjustable. Butane Fuel Refillable. Lighter Does NOT Come Filled with Butane Due to Mailing Regulations..
  • STRONG FLAME: Super Powerful Flame and Large Flame Base. Large Flame Base gives you a wider surface area that has no issue lighting objects in any....
  • WINDPROOF: Strong Single Flame Wind resistant..
  • Packed in an elegant gift box. It’s a perfect gift for any occasions like, Wedding, Father’s Day, Birthday, Anniversary etc..
Check Stock

BENCHMARK FR Flame Resistant Face Mask, 3 Pack, CAT 2, NFPA 2112 (Black)

  • Arc Flash & Flame Resistant For Life - This 6.2 oz material is a soft, flame resistant cotton. They will remain arc and flame retardant regardless of the washes and wear cycles. Our face masks are NFPA 70E Compliant, CAT/HRC 2, ATPV = 8.7 cal/cm2 and meet ASTM F1506. This Cloth Face Covering meets the requirements of NFPA 2112-2018..
  • Lightweight & Skin Safe - This FRC fire resistant fabric is safe to wear directly against your skin when at work. The flame-resistant materials used are non-allergenic and will not react with your skin. We voluntarily meet the most stringent international health codes related to formaldehyde, ammonia, arsenic, heavy metals and other toxins. It is pre-shrunk and odorless, so they are ready to wear, right out of the package..
  • Engineered For Comfort – When we developed our arc and flame-resistant face masks, we did it with comfort in mind. Instead of using multiple layers, we use a single layer that provides protection but is breathable. It has a contoured fit, so it stays securely over your nose and chin. Instead of having an interior polyester tag rubbing your face, we used a non-flammable stamp on the outside. The seams are on the outside so you they don’t rub against your nose..
Check Stock

Bernzomatic TS8000 - High Intensity Trigger Start Torch

  • Auto start/stop ignition easily ignites and extinguishes flame.
  • Ultra swirl flame provides maximum heat output for large diameter soldering, brazing, heat treating and light welding.
  • For best results, use with MAP-Pro fuel, such as the Bernzomatic 14.1 oz. MAP-Pro Hand Torch Cylinder.
  • Searzall is an attachment secured to the top of a blowtorch to create the perfect searing temperature without the off-putting aromas that typically result when cooking with blowtorches.
  • By forcing the thin flame of the blowtorch through two layers of fine, high-temperature-resistant wire mesh, it produces a consistent, evenly spread flame that provides a professional quality finish to meats and other food items.
Check Stock

Blazer PB207CR The Torch Butane Refillable Lighter Black

  • Side panel locking switch to lock flame on, for ease of use.
  • Flexible, detachable rubber base, for hands-free, continuous use.
  • Clear base, for easily viewable fuel gauge.
  • Piezoelectric ignition system, requires no electrical connection.
  • 2,500-degree F, wind-resistant, blue-torch flame, for more precise flame tip.
Check Stock

Bernzomatic TS8000 - High Intensity Trigger Start Torch with Searzall Torch Attachment

  • Auto start/stop ignition easily ignites and extinguishes flame.
  • Ultra swirl flame provides maximum heat output for large diameter soldering, brazing, heat treating and light welding.
  • For best results, use with MAP-Pro fuel, such as the Bernzomatic 14.1 oz. MAP-Pro Hand Torch Cylinder.
  • Searzall is an attachment secured to the top of a blowtorch to create the perfect searing temperature without the off-putting aromas that typically....
  • By forcing the thin flame of the blowtorch through two layers of fine, high-temperature-resistant wire mesh, it produces a consistent, evenly spread....
Check Stock

RIDGID 67053, RP-350 Battery Kit W/ProPress Jaws (1/2\ - 2\ Capacity), ProPress Tool , Red

  • Flexible, detachable rubber base, for hands-free, continuous us.
  • Side panel locking switch to lock flame on, for ease of use.
  • Professional Model Without Child Resistant Switch.
  • Piezoelectric ignition system, requires no electrical connection.
  • 2,500-degree F, wind-resistant, blue-torch flame, for more precise flame tip.
Check Stock

Lab Bunsen Burner, Air & Gas Adjustment with Flame Stabilizer for Natural Gas & Propane & Lab Heating

  • Bunsen burner is one of the high temperature heating tools commonly used in scientific laboratories. The Bunsen burner can safely burn gaseous fuel, and the flame does not flow back into the gas supply pipe. Gas or natural gas, propane gas, etc. are usually used for fuel..
  • Bunsen burners can be used to heat non-combustible objects or solutions. It can be used to heat objects to very high temperatures. The maximum temperature can be close to 1200 °C. Because the operating temperature is higher than the alcohol lamp, the material of the lamp must use a heat-resistant metal..
  • To connect to the burner, please use a gas hose with inner diameter of 8-9 mm (5/16" or 3/8")..
  • With gas regulator, air intake regulator, and flame stabilizer.Can be used with natural gas and liquid propane.Flame Adjustable: Needle valve fitted above the base can realize easily control the flame, Multiple flames for multiple purpose..
  • Base diameter - 7.8cm/3.07in, height - 17.5cm/6.89in Materail: Zinc alloy base & copper tube, Weight: Approx. 224g.
Check Stock

J H Heat Resistant Oven Glove: EN407 Certified 932 °F, 2 Layers Silicone Coating, Coral Shell with Pink Coating, BBQ & Oven Mitts for Cooking, Kitchen, Fireplace, Grilling, 1 Pair, Women Fits All

  • New Generation Hot Resistant Glove Exclusive Quadruple Heat Protection Technology: New Design of thickened 3 layers silicone coating. 1 Layer of Coral Dupont Nomex & Kevlar Heat Resistant Fiber + 2 Layers of Heat Resistant Silicone coating on the shell Contain 1 Layer Pink silicone block coating and 1 Layer transparent silicone on full palm coating. 1 Layer Heat Resistant Silicon coating on the finger of inner shell. 1 Layer of 100% Cotton Liner..
  • Food-grade Silicone Coating with nonslip grip texture, handling food and slippery items, not a problem.
  • Make by Nomex, heat-and flame-resistant fiber, the same material used to build firefighter suits, extreme heat resistant. Quality cotton lining for perspiration free..
  • Apply to kitchen, oven, grill, barbecue, fireplace and heat/fire resistant purpose..
Check Stock

Searzall Torch Attachment, Small, Stainless

  • Searzall is an attachment secured to the top of a blowtorch to create the perfect searing temperature without the off-putting aromas that typically result when cooking with blowtorches.
  • By forcing the thin flame of the blowtorch through two layers of fine, high-temperature-resistant wire mesh, it produces a consistent, evenly spread flame that provides a professional quality finish to meats and other food items.
  • back screen is coated in palladium which provides even more temperature and oxidation resistance.
  • includes: one (1) Searzall , one (1) aluminum sleeve adapter, typically pre-attached to the rear of your Searzall, one (1) 2-mm allen key, one (1) pre-attached thumbscrew, one (1) Searzall spacing stick, and one allen screw pre-attached to the sleeve adapter.
  • Searzall is compatible with the Bernzomatic TS8000 torch head, and 16.4 ounce propane tank.
Check Stock