Reviews Flame Plasma Cutting Machine

Dynaloop Plasma Cutter 50Amps, Dual Voltage 110V 220V Plasma Cutter Machine, 8-10mm Cutting Thickness,16Pcs Plasma Cutting Equipment (DC500D 110V220V)

  • 【Inverter plasma cutter】： DC500D has the function of Inverter technology high frequency arc initiation（50/60HZ）. This plasma cutter needs to touch the workpiece to arc, we suggest pilot arc function If you don't like to touch metal to arc..
  • 【Automatic voltage detection】：Plasma cutting machine can adapt to dual-voltage, whether access 110V or 220V circuit can be automatically identified, and displayed on the front panel, no manual adjustment..
  • 【Air Filter Pressure Regulator Combo】：Plasma cutting machines cut materials by compressing gas(Oxygen,air, inert and others depending on material being cut ), Air regulator inside the machine can lower or maintain air pressure and filter moisture and fine particles from the air to reach effective cutting..
  • 【Cutting Thickness】The plasma cutting machine can cut different thicknesses under different voltages. ✨110V: 35A, 30-50PSI (Quality cutting thickness is 6mm#60PSI(0.6Mpa).
  • Max cutting thickness is 10mm#60PSI( 0.6Mpa)).
  • ✨220V: 50A, 30-70PSI(Quality cutting thickness is 10mm#65PSI(0.65Mpa), Max cutting thickness 14mm#65PSI(0.6Mpa))..
  • 【Portable & Multi-purpose】20lb cutting machine can be carried anywhere to cut workpiece, suitable for cutting stainless steel, alloy steel, low ca....
Check Stock

Warfox Plasma Cutter 120/240V Dual Voltage Plasma Cutting Machine, Max Cutting Thickness 14mm, Clean Cutting Thickness 10mm in 65PSI (CUT50D 120/240V)

  • Plasma Cutter, 120V/240V 50A plasma cutter with IGBT inverter technology, long life and efficient higher than mosfet machine. IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting.
  • Plasma cutting machine has current display function and air post time adjustment. Adjustment range is 2-20S, users can adjust the time for post air, effectively providing cooling,extend consumable's working life.
  • Max cutting thickness 14mm ,10mm quality cutting thickness in 240v@65PSI 50A.
  • Under 120V, it is 35Amps.Quality cutting thickness is 8mm, Severance cutting thickness is 12mm.
  • Accessories included:4M PT31 cutting torch, 2.5M Earth clamp,5pcs tips, 5pcs electrodes, 2 meters air hose, 4pcs hose clamp, 1adaptor, 1 manual.Air regulator,air filter,air gauge are fixed at machine.
  • The cutting machine can cut carbon steel, stainless steel, steel and other materials. It is an indispensable machine in your tool room.
Check Stock

Amico PT31-13 13 Feet Plasma Cutting Torch Gun For CUT-30 40 CTS-160 180 & APC-30/40

  • 13 Feet PT-31/LG-40 plasma torch assembly, max. 239 psi air pressure, 60% duty cycle at 40 amp.
  • High frequency ignition, very easy to start arc, post flow: 40 sec. recommended.
  • The cutting torch head is made of high quality material, with good flame retardation.
  • Plasma cutting is characterized with high cutting speed, high precision, good cutting effect and small thermal deformation..
  • Special customized for AMICO CUT-30, CUT-40, CTS-160, CTS-180, ACP-30A, APC-40A.
Check Stock

Amico PT31-25 25 Feet Plasma Cutting Torch Gun For CUT-30 40 CTS-160 180 & APC-30/40

  • 25 Feet PT-31/LG-40 plasma torch assembly, max. 239 psi air pressure, 60% duty cycle at 40 amp.
  • High frequency ignition, very easy to start arc, post flow: 40 sec. recommended.
  • The cutting torch head is made of high quality material, with good flame retardation.
  • Plasma cutting is characterized with high cutting speed, high precision, good cutting effect and small thermal deformation..
  • Special customized for AMICO CUT-30, CUT-40, CTS-160, CTS-180, ACP-30A, APC-40A.
Check Stock

Amico PT31-15 15 Feet Plasma Cutting Torch Gun For CUT-30 40 CTS-160 180 & APC-30/40

  • 15 Feet PT-31/LG-40 plasma torch assembly, max. 239 psi air pressure, 60% duty cycle at 40 amp.
  • High frequency ignition, very easy to start arc, post flow: 40 sec. recommended.
  • The cutting torch head is made of high quality material, with good flame retardation.
  • Plasma cutting is characterized with high cutting speed, high precision, good cutting effect and small thermal deformation..
  • Special customized for AMICO CUT-30, CUT-40, CTS-160, CTS-180, ACP-30A, APC-40A.
Check Stock

Amico PT-31-20 20 Feet Plasma Cutting Torch Gun For CUT-30 40 CTS-160 180 & APC-30/40

  • 20 Feet PT-31/LG-40 plasma torch assembly, max. 239 psi air pressure, 60% duty cycle at 40 amp.
  • High frequency ignition, very easy to start arc, post flow: 40 sec. recommended.
  • The cutting torch head is made of high quality material, with good flame retardation.
  • Plasma cutting is characterized with high cutting speed, high precision, good cutting effect and small thermal deformation..
  • Special customized for AMICO CUT-30, CUT-40, CTS-160, CTS-180, ACP-30A, APC-40A.
Check Stock

ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V

  • Non-Touch Pilot Arc: 50Amp plasma cutter, pilot arc technology allows you to cut without touching the tip of the metal, effectively cutting rough, painted and rusty surfaces, producing minimum slag, maximum cutting thickness of 14mm, ideal cutting thickness of 10mm..
  • TIG & MMA Mode: 200Amp tig welder machine adopts HF arc ignition technology and has the functions of HF TIG, spot TIG and pulse TIG. The welding has little damage to the base metal and can weld thin process parts. 180Amp MMA adjustable arc current, arc welding stability. Suitable for 1.0mm to 4.0mm different acid base electrode welding..
  • Easy To Use: Plasma Cutter machine adopts IGBT inverter technology, 110/220V dual voltage automatic recognition of input current and voltage. Plasma Cutter equipped with NPT 1/4 "air regular, Duty cycle is 60%. Built-in post time, when you stop cutting, the air runs for a minute to cool the consumables of the plasma cutting torch and extending the life of consumables..
  • Safe & Portable: Built-in overload protection and fan cooling system. When the output current and machine temperature exceed the set standard, the p....
Check Stock

AMICO PT31-13 13 ft Plasma Torch Gun PT-31/LG-40 For CUT-30/40 CTS-160/180 & APC-30/40

  • 13 Feet PT-31/LG-40 plasma torch assembly, max. 239 psi air pressure, 60% duty cycle at 40 amp.
  • High frequency ignition, very easy to start arc, post flow: 40 sec. recommended.
  • The cutting torch head is made of high quality material, with good flame retardation.
  • Plasma cutting is characterized with high cutting speed, high precision, good cutting effect and small thermal deformation..
  • Special customized for AMICO CUT-30, CUT-40, CTS-160, CTS-180, ACP-30A, APC-40A.
Check Stock

Plasma Cutter, 50Amp Dual Voltage 110V/220V Plasma Cutting Machine, Inverter Metal Plasma Cutting Equipment, Maximum Cutting Thickness 5/9\(14mm)

  • 【Plasma Cutter】The CUT-50 cuts rusted, rough or painted surfaces effectively and produces very little dross during the cutting process. CUT-50 plasma cutting machine has better cutting quality and longer wearing parts life..
  • 【Excellent Performance】20-50 A output, 2/5" (10mm) ideal clean cuts and 4/7" (14mm) maximum cut thickness under 220V.
  • 10-35 A output, 1/3" (8mm) ideal clean cuts and a maximum cut thickness of 2/5" (10mm) under 110V. This plasma cutter suitable for cutting alloy steel, stainless steel, copper, aluminum and other metals..
  • 【Dual Voltage Input】This plasma cutting machine supports 110V / 220V switching input power supply. 110V, 50/60Hz @ 35 A input.
  • 220V, 50/60Hz @ 28 A input. The product comes with a power conversion plug, which can be plug and play in different environments..
  • 【Safe & Portable】The plasma cutter is small in size, light in weight, and comes with a handle for easy portability. Plasma cutter with built-in over-heat protection, over-voltage protection, strong heat dissipation, good insulation.Adopt air pressure adjustment device，use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and other metals..
  • 【Package Includes】PT-31 Plasma Torch, Hose, Ground Clip, Power Adapt....
Check Stock

Plasma Cutter 110&220V 45Amp 1/2\ Clean Cut 3/5'' Max Cut Plasma Cutting Machiner,HF IGBT Inverter Portable Plasma Cutting Equitment for Aluminum Alloy Mild Steel Cast Iron

  • ...rials than standard DC plasma cutters. Cuts faster with less distortion in the workpiece.It is easy to ignite arc by adopting HF arc ignition.With IGBT inverter technology, It is long life and efficient higher than most machine. It is IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting.
  • ✅【Cutting Thickness】20-50A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V. 20-35A DC output: 1/3" ideal clean cutting and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation..
  • ✅【Wildely Application】This plasma cutting machine available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work,repair/maintenance,metal processing,manufacture ect,lightweight and portable,also suitable home DIY and industrial projects ..
  • ✅【Setup Simple】Automatic Dual Voltage Transfer / Dual Frequency (110/120 V 220/240 V 50/60Hz),With the protection of the electric circuit against over currents, over voltages and low voltages, the cutting welder works in a more safer and professional. Air post time adjust function, the adjustment range is 1-15seconds ,this function allow user adjust the time for post air to cool torch head effectivel....
Check Stock