Reviews First Alert Z Wave Ring

HFS DC06 Microwave Radar Sensor Switch Module, 5.8G DC 5V Smart Motion Sensor Switch Board, Home Control Corridor Aisle Garage, etc

  • OUTDOOR SENSOR: Introducing the first Z-Wave motion detector created for outdoor use. Monitor activity remotely through your Z-Wave hub (required, sold separately) and automate outdoor lighting based on motion. Keep away from direct rainfall and sunlight..
  • EASY TO INSTALL: Add it to your system quickly through auto-inclusion and mount it in minutes with just a couple of screws. Power it with batteries (included) or micro USB (cable + adapter sold separately). Program motion time-out and light level trigger by turning the knobs right on the sensor. New version (2.0) comes with advanced settings for motion sensitivity and lux reports if supported by your hub. Motion detection up to 20 feet..
  • COMPATIBILITY: The sensor works great on HomeSeer, Hubitat, Fibaro, and Vera. Custom device handler needed for SmartThings (go to Zooz support portal or contact seller for instructions). Does NOT work with Wink, Ring, ADT, or other Z-Wave alarm panels. Alexa is NOT a Z-Wave hub (the sensor won't work directly with Echo)..
  • SECURITY: Equipped with the latest authenticated S2 security protocol for encrypted signal and hacker-proof smart home (NOTE: your Z-Wave hub needs to support S2 for this feature to work). Tamper protection and low battery alerts for your peace of mi....
Check Stock

SCHLAGE FE599NX Camelot by Accent Keypad Entry with Z-Wave with 16086 Latch 10027 Strike Lifetime Brass Finish

  • Works with Alexa for voice control (hub required, Alexa device and hub sold separately)..
  • Receive text or email alert when your family uses their codes, so you know who's home.
  • Grant access to your home when you can't be there with a scheduled code to let someone.
  • Add, delete or change user codes remotely.
  • Run the most important systems in your home-thermostats, locks, lights and cameras from anywhere with Nexia Home Intelligence.
  • This Z-Wave enabled product communicates wirelessly to other Z-Wave products in your home.
  • remote management with a Nexia Home Intelligence system.
  • This Z-Wave enabled product allows for wireless communication to other Z-Wave products in your home.
  • Door range: 1-3/8 to 1-3/4 (35mm-44mm) standard.
Check Stock

Enbrighten Z-Wave in-Wall Smart Toggle Switch + Enbrighten Z-Wave in-Wall Smart Toggle Dimmer

  • VOICE CONTROL – ALEXA AND GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more..
  • VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera and more..
Check Stock

Aeotec Siren Gen5, Z-Wave Plus, 105dB Siren with Strobe alerts, Plug-in, Backup Battery

  • Z-Wave emergency siren powerfully loud at 105dB with 210 lumen strobe light alerts..
  • Siren has to immediately alert you to emergencies and safety problems. So that you always hear it, it has a high-intensity, 105dB speaker built right in..
  • Tamper and power out protection with inbuilt, self-recharging, 430 mAh backup battery..
  • Compatible with certified Z-Wave gateways and software including Fibaro, HomeSeer, Indigo, openHAB, Piper, Samsung SmartThings, Vera, and Wink..
  • Z-Wave Plus certified. Certification number: ZC10-14090012..
Check Stock

Aeotec Smart Switch 6, Zwave Switch Z-Wave Plus Plug 15A for Home Security Automation Z-Wave Power Monitor, Without USB Port

  • Automate your home lights and appliances with Z-Wave plug in outlet. Aeotec zwave outlet controls up to 15 amps and monitors real-time power consumption with a variable color LED ring and reports the data to the gateway system..
  • Z-Wave Hub Required. Aeotec Smart Switch 6 Z-Wave plug is compatible with most Z-Wave gateways including SmartThings, Vera, Webee, Wink-hub, Zipabox, Universal Devices ISY994Zw, openHAB, Open Z-Wave, Oomi, Jeedom, Indigo 7, HomeSeer, Home Assistant, Abode and more..
  • Z-Wave Smart Plug, Small Size. Beautifully designed and powerful performance. Smart Switch 6 ZWave smart outlet plug has powerful features packed in the tiny size of 2.20 x 2.20 x 1.96 (1.38) inches..
  • Z-Wave Plus certified smartplug for quicker response time, better wireless zwave range, and additional wireless security encryption. Z Wave certification number: ZC10-15080004..
  • Built-in features include surge protection for a safer home and signal repeater to improve the communication between the other ZWave devices..
Check Stock

Minoston Z-Wave Plug 700 Plug-in Outlet Built-in Repeater Range Extender, Z-Wave Hub Required, Alexa and Google Assistant Compatible(MP31Z)

  • This Z-Wave plug is compatible with those Z-Wave hub: SmartThings, Vera, Wink, Fibaro, Homeseer, Ring, Honeywell, 2GIG, Hubitat(change device type). ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS！Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
  • Z-Wave plug in outlet is 15A Max Loading for using with most of home lighting devices and home appliances..
  • Timer schedule: Control lights to come on or turn off via a schedule at certain times of the day to reduce your electricity bill, set up custom scenes with other devices enrich intelligent life..
  • Z-Wave 700 series chip for Smart Start and for most of Z-Wave hubs..
  • Easy to Setup: No wiring required. Simply plug in the device to a wall outlet and connect to your hub for convenient smart outlet features..
Check Stock

Zooz Z-Wave Plus Power Switch ZEN15 for 110V AC Units, Sump Pumps, Humidifiers, and More

  • ... with no immediate access to a receptacle..
  • COMPATIBILITY: Use the Power Switch with any certified Z-Wave gateway for simple on/off control (Wink, Z-Wave alarm panels). Advanced settings and energy monitoring available for open systems only, including Vera, SmartThings (custom device handler required, contact seller first), HomeSeer, and Fibaro Home Center Lite..
Check Stock

Minoston Z-Wave Outdoor Dimmer Plug, Outdoor Smart Outlet Switch, Z-Wave Hub Required, Weatherproof, Built-in Repeater, Work with SmartThings, Wink, Alexa, Black(MP22ZD)

  • This Z-Wave outdoor dimmer plug compatible with those Z-Wave hub: SmartThings, Vera, Wink, Fibaro, Homeseer, Ring, Honeywell, 2GIG, Hubitat(change device type). ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS！Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
  • 0-100% Dimming and Voice Control: This Z-Wave outdoor dimmer for string lights can adjust the light brightness from 0-100% by voice commands. Just say:“Hey Alexa, set the led strip lights to 75%”..
  • Ideal for Outdoor: IP65 weatherproof housing. Ideal for Garden, Backyard, Kitchen, Bathroom, Porch, Balcony, Garage, Basement, Patio or Electric grill, Sprinkler, Washing machine, Christmas tree, landscape lighting, fountains, lamps, pumps, and other outdoor or indoor-use electric appliances..
  • Schedule and Timer: You can set automatic daily timers or create on/off routing so that the Z-Wave plug can turn on and off automatically. And saving energy when the plugged-in appliances are not needed or are left on by accident..
  • 400W Max Power Z-Wave Dimmer Plug: The Z-Wave plug-in smart dimmer plug works with dimmable string lights in LED, INC bulb. Please make sure your string lights are dimmable and the total power is less than 400W. 150W Max for....
Check Stock

Zooz Z-Wave Plus S2 Double Plug ZEN25, 2 Outlets, 1 USB Port

  • 2 SMART OUTLETS: Control 2 outlets individually or at once from your Z-Wave hub (required, sold separately). Alexa is NOT a Z-Wave hub. Does NOT work with Z-Wave alarm panels like ADT, Ring, or Alarm.com. Custom handler required for SmartThings, contact seller for details..
  • POWER MONITOR: Track energy of connected devices for smarter power management. Schedule automatic shut-off times and restore status after power failure. NO ENERGY MONITORING OR ADVANCED SETTINGS ON WINK!.
  • USB PORT: Charge your tablet or headphones and get on/off (charging/charged) reports to your email or phone (NO Z-Wave control, reports only, turn off the device while charging for best results)..
  • SIMPLE SET-UP: Just plug it in to a standard receptacle. The extra compact design allows you to fit 2 Double Plugs in the same receptacle! Go to Zooz support website for step-by-step instructions how to add and use the Double Plug with your Z-Wave hub..
  • CERTIFIED: This device features overload protection and has been confirmed by ETL labs to comply with North American safety standards. It's equipped with the latest S2 smart security (your hub needs to support S2 too) and Z-Wave Plus 500 chip to offer longer range and faster communication speed..
Check Stock

Qubino Z-Wave Plus Smart On/Off Thermostat 2 ZMNKID3 (Z-Wave Hub Required)

  • UNIQUE Z-WAVE: The Stelpro KI is the first Z-Wave thermostat in North America to work with line voltage, with a 2-wire connection to the heater..
  • EFFICIENT HEATING: Remotely control your baseboard and convector heaters from your mobile device or computer (when included to a Z-Wave gateway controller - sold separately)..
  • SAVE SMART: Set your own temperature schedules to reduce energy bills with minimal effort.
  • take advantage of the device's ECO mode, designed to be as energy-efficient as possible..
  • ELEVATED CLIMATE CONTROL: Create advanced automations by pairing the Stelpro KI with other Z-Wave devices. Trigger the heating on/off with a door/window sensor, temperature sensor, motion sensor, etc..
  • CERTIFIED QUALITY: This thermostat is Z-Wave Plus and UL certified. Made in Canada. Works with SmartThings, Vera, HomeSeer, Nexia and Wink..
Check Stock