Reviews Fiber Cable Enclosure

Make Me Yours (Billionaire's Sub Book 2)

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure).
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to....
Check Stock

Parts Express Cast Frame #10-32 Speaker Mounting Kit

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound....
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16....
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
Check Stock

UGREEN M.2 NVMe SSD Enclosure, Tool-Free USB C External NVMe SSD Enclosure, 10Gbps M.2 NVMe to USB Adapter, USB 3.2 M.2 NVMe Reader Supports M and B&M Keys and Size 2230/2242 /2260/2280 SSDs

  • 10Gbps NVMe Enclosure: With the latest USB 3.2 Gen2, this M.2 enclosure can achieve a 10Gbps data transmission rate. Backward compatible with USB 3.1 and USB 3.0..
  • Tool-Free SSD Enclosure: Tool-free NVMe SSD enclosure allows quick and easy installation. Plug and play, no driver needed. The buckle design of the M.2 SSD enclosure can ensure steady and speedy transmission. (Does not support SATA SSD).
  • Broad Compatibility: The UGREEN M.2 NVMe SSD enclosure is specially designed for M and B&M Keys and for 2230/ 2242/ 2260/2280 sized SSDs Max 8TB. The M.2 NVMe enclosure is applicable to Windows, Mac OS, Linux, Android, IOS systems..
  • Safety & Stability: USB C NVMe enclosure adopts an advanced RTL9210 chip, built with short-circuit, over-current and multi-protection to ensure safety for your SSD and valuable data, as well as supporting UASP/ Trim with fast transmission speed..
  • Compact & Portable: This ultra-slim aluminum external NVMe enclosure with an extra silicone case is portable yet durable, and much easier to carry with this M.2 to USB adapter, making it ideal for traveli....
Check Stock

ORICO 2.5'' USB C External Hard Drive Enclosure, SATA 3.0 to USB 3.1 Gen2 6Gbps Case for 2.5 Inch HDD/SSD Support Max 4TB with UASP Tool Free(2189C3)

  • 【Portable Storage Enclosure】 - ORICO USB C hard drive enclosure can easily connect your 7/9.5mm 2.5 inch SSD HDD to PC, laptop, smart TV, smart router, PS4 and XBOX to transfer data, expand storage, upgrade system, backup files, recover data and recycle old hard drives..
  • 【Ultra-fast USB 3.1 Gen2 Port】 - The USB C 3.1 Gen2 port of this hard drive enclosure supports 10Gbps max transfer speed and UASP accelerated transmission protocol. The SATA III supports max 6Gbps. Therefore the max speed of this enclosure is 6Gbps. 【Only USB-A to UAB-C Cable included】.
  • 【Convenient to Use】 - Tool free installation. Plug and Play. No driver needed for this SATA enclosure. Just slide down the cover, insert the drive, and then slide the cover up to use. Hot-Swappable. ONLY USB-C to USB-A cable included. For using with Mac, pls make sure to use a USB-C to USB-C cable(Not Included)..
  • 【Universal Compatibility】- ORICO hard drive enclosure supports Windows / mac / Linux systems. Designed for 7mm/9.5mm 2.5 inch hard drives, and max support 6TB. It fits for SATA hard drives such as WD, Seagate, Toshiba, Hitachi, Samsung, Crucial, SanDisk, etc. And can be used for computers, TVs, smart routers, PS4, XBOX and other devices..
  • 【Friendly Design】 - This external ....
Check Stock

Rockville APM6B 6.5" USB Studio Monitor Speakers Bundle RockMix 2 Recording Mixer with USB Interface, (2) RCM03 Microphone, PRO-M50 Studio Headphones (4 Items)

  • ...dio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad.
  • Features of APM6B: Rockville APM6B 6.5" 2-Way 350 Watt Active/Powered USB Studio Monitor Speakers in Black (Pair). RMS: 175 Watt. Two-Way Active Studio Monitor Speaker System. Quad Amp Design: Each Driver Features Frequency Specific Independent Amplifiers. Enclosure is made of top quality MDF wood. Our enclosure is not particleboard, it is true high-grade MDF! The enclosure is 0.5” thick while the front board of it is a full 1” thickness to give you the ultimate best sound quality!..
  • What's in the Box of RockMix 2: Mixer with USB recording interface. USB cable. USB power adapter. 4 Non-slip rubber pads. Owner manual and warranty card. Recommended Applications:. Two Person Live Stream/recording (Zoom, podcast, etc). One instrument and one singer who wants to record or live stream or perform live. Features: Rockville RockMix 2 Channel Mic+Instrument Pro Recording Mixer with USB Recording Interface..
  • What's Included of RCM03: RCM03 Condenser Microphone (made of aluminum!). 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device. 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power. Metal shock mount. Metal Anti-wind foam cap. Owne....
Check Stock

HDE 3.5 Inch SATA Hard Drive Case USB 2.0 Powered External Aluminum Enclosure Silver Finish

  • Aluminum enclosure fits 3.5″ SATA hard drives only | Check to ensure drive supports SATA prior to purchase.
  • Includes AC adapter to power hard disk and not draw from internal PC power.
  • On/Off switch allows for easy drive control | Indicator light shows when drive is accessed.
  • Drive enclosure connects to computer via USB 2.0 or earlier ports | Access speed dependent on USB port.
  • Package Contents: 1 x Power cable & adapter, 1 x USB cable, 1 x Drive enclosure | Hard drive not included.
Check Stock

ORICO 2.5 inch Hard Drive Enclosure SATA to USB C 3.1 6Gbps External Hard Drive Case for 7/9.5mm HDD/SSD Support UASP Up to 4TB -2139C3-CR

  • [USB3.1 6Gbps Enclosure] -- The 2.5 inch hard drive enclosure is adopted by usb3.1 port, with the high performance mater chip can helps the transmission rate reach up to the maxinum sata rate for 6Gbps, UASP protocol supported and much faster than traditional usb3.0 port,smooth transfer, no delay for the data.
  • [Transparent Design] -- The external hard drive enclosure is made by high quality PC board with the advantage of anti shock and also helps you to monitoring the hard drive working status easily and distinguish the data you want, no need to open the enclosure cover.
  • [Intelligent Detection of Auto-sleep] -- The usb3.1 hard drive enclosure with the function of 10 minutes auto sleep mode with no operation, which can greatly reducing the invalid energy consumption, prolonging the service life of the hard case and protect the hard drive data for you.
  • [Tool Free Installation] -- No any tools and screws needed, you can easily slide the cover of the 2.5'' hdd enclosure and insert your hard drive in, just plug and play. The led indicator can inform you when your ssd enclosure is fuctioning at maximum capability, also compatible with Windows, Mac and Linux.
  • [Widely Compatibility] -- The 2.5 external hard drive enclosure can support sata port hdd and ssd which....
Check Stock

UGREEN NVMe and SATA M.2 Enclosure Tool-Free, 10Gbps USB C 3.2 Gen2, Thunderbolt 3 Compatible, NVMe SSD Enclosure Supports M and B&M Keys 2280/ 2230/ 2242/ 2260 SSDs

  • 10Gbps M.2 NVMe SATA Enclosure: Second Gen USB C 3.2 or Thunderbolt 3 transfers data fast. NVMe Enclosure with SATA protocols and transport speeds of up to 10Gbps..
  • Tool-Free Installation: Install this plug and play NVMe SSD enclosure quickly and easily, no drivers needed. The buckle design of the M.2 SSD enclosure ensures steady and speedy transmissions..
  • Broad Compatibility: Specifically designed for M and B&M Keys, 2230 /2242 /2260 /2280 SSD sizes above 8TB. Applicable for Windows, MacOS, Linux, Android, and iOS systems. (NOTE: Does not support M-SATA or an SSD with a heatsink larger than 1mm)..
  • Safe & Stable: Featuring an advanced RTL9210B chip, get short-circuit, over-current, and various other multi-protections ensuring safety for your SSD and data. Supports UASP/Trim with fast transmission speeds..
  • Compact & Portable: An ultra-slim aluminum case with a silicone frame makes this enclosure lightweight, durable, and ideal for traveling. What’s Included: 1×SSD enclosure USB C, 1×USB-C to C cable, 1×USB-C to A cable, 1×User Manual..
Check Stock

Waterproof WiFi Indoor Outdoor Weatherproof Enclosure Cabinet Box

  • Waterproof WiFi Indoor Outdoor Weatherproof Nema Enclosure Cabinet.
  • A low cost solution for the protection of equipment from theft and damage.
  • This rugged enclosure is ideal size for securing wireless access points, WiFi routers and bridges.
  • Large removable WiFi label to help hide or identify WiFi capability in public areasDescriptionGray NEMA Type 3R / IP42 rated weather proof ABS enclosure. - Inside Dimension 10.5 x 9.5 x 4 inches. - Raised lid with continuous gasket. - Lockable Latch (Padlockable) - Heavy duty hook-and-loop Velcro tape for mounting equipment in enclosure - 4 Mounting stand-offs - 3 Gasketed mounting holes - Easy to install enclosure mounting hardware included - Removable 120 VAC power module - 3 Rubber cable ports.
Check Stock

MTX TNP212D2 12-Inch 400-Watt RMS Dual Loaded 1200-Watt Car Subwoofer Enclosure Audio with Sub Box Mono Block Amplifier and 8 Gauge Amplifier Amp Complete Wiring Installation Kit

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure).
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches.
Check Stock