Reviews Ferrule Ball Valve

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • ... relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule..
  • 【Great Compression Sleeve Puller Tool】We love and take pride in our angle stop puller and we back this ferrule blaster up with lifetime service. Have the confidence that this compression ring removal tool will last, if the....
Check Stock

X·CELLENT Mini Golf Putting Green Flagstick for Yard Practice Set, Golf Pin Flagpole Set, Portable 2-Section Fiberglass Golf Flag Sticks,3 Feet

  • Durable Flag Pole: 2 section baking varnish fiberglass Golf Flagsticks with ABS Ferrule+baking finish aluminum connector+mushroom Bakelite Stud/Top..
  • Portable & Strong: 2 section design makes it easy to set up and take down. 1/2 ” Diameter fiberglass Flag Pole with baking Varnish craft makes our Flagsticks very strong and never bend in the wind..
  • Applications: Ideal for Family Golf Game,Backyard Golf Practice, with X·cellent 2 Section Golf Flag pole set, you can have your backyard your own practice course, putting green or chipping green..
  • Unique Ball Retriever design: Bright ABS Ferrule will not discolor, it fits the USGA and PGA standard Golf Hole Cups, the Ferrule comes with 3 drain hole design making it easy to keep the hole cup dry and clean,besides, the entire Flagpole with ABS base can be also used as a Ball Retriever,the 3’(36”) Pin Flag Pole makes golfers pick up the golf balls without bending down..
  • Great training system for indoor/outdoor Putting Greens, Golf Course. Perfect replacement for your existing Mini Golf Flagsticks. Should you have any queries please freely contact us, we’ll get back to you within 24hrs..
Check Stock

PVC COMPACT BALL VALVE 4" - Socket - Sanipro

  • EZ-FLO SCHEDULE 40 PVC BALL VALVE: This EZ-FLO ball valve is suitable for use as an inline valve for connecting two pipes going in the same direction.
  • equipped with a 3/4 inch slip connection on each end.
  • DURABLE: This schedule 40 PVC ball valve is made of heavy-duty CPVC that protects against corrosion and provides strength and durability.
  • EASY TO USE: This PVC ball valve is equipped with a quarter-turn red plastic handle for an easy-to-control water flow.
  • SPECS: This valve can withstand a working pressure of 150 PSI and a maximum temperature of 140 degrees F.
  • SAFETY: This ball valve complies with lead-free guidelines for potable water applications.
Check Stock

DERNORD Butterfly Valve with Blue Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 inch Tri Clamp Butterfly Valve)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • DERNORD Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

DERNORD Stainless Steel Ball Valve 1PC Type 0.25\ NPT Standard Port for Water, Oil, and Gas (1/4 Inch Ball Valve)

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..
Check Stock

Exchilerator Ready To Brew - Efficient Wort Chiller for Home Brew Beer - 25% Faster Than Stainless Steel Chiller - Best Counter Flow Wort Chiller

  • EASY TO USE - FAST CLEAN UP. The Maxx is for a brewer with pump, without pumps or with warm chilling water..
  • USES FDA COMPLIANT copper, PEX, stainless collars, lead free solder and lead free brass fittings. Unlike garden hose designs with so called adjustable nut and ferrule fittings, the Exchilerator is skillfully soldered the full length of the fittings this leaves no place for infections to hide! (see cross sectional photo).
  • READY TO BREW MANIFOLD INCLUDED temp gauge, 1/2" s/steel tee, 1/2" s/steel close nipple, 1/2" s/steel ball valve,brass garden hose adapters and a roll of Teflon tape comes standard on the Maxx.( see photo of parts included).
  • 5 GALLONS 5 MINUTES 5 YEAR WARRANTY. YOU DESERVE THE QUALITY AND WORKMANSHIP OF THE MAXX ON YOUR PERSONAL AND UNIQUE BREW STAND!.
  • COPPER CHILLS FASTER THAN STAINLESS BUY YOURS TODAY !.
Check Stock

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

  • 【100% No-risk Purchase】If you receive any problems with pressure washer ball valve, you can get a full refund or a new one for free! Please feel free to contact us if you have questions during use. We will give you a satisfactory answer within 12 hours. Customer satisfaction is our tireless pursuit..
  • 【Convenience and Safety】Ball valve for pressure washer gun is made of lightweight material, 3/8" Female BSP Inlet x 3/8" Female BSP Outlet with round frame. DN10 ball valve unique design can withstand high Pressure can be used for pressure washer gun, foam cannons and power washer..
  • 【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
  • 【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to ....
Check Stock

STYDDI Stainless Steel High Pressure Washer Shut-Off Ball Valve Kit with 3/8' Quick Connect for Power Washer Hose, 4500 PSI

  • BRINGS CONVENIENCE AND SAFE - The biggest advantage of using a pressure washer shut off ball valve kit is changing the implements safely and conveniently during cleaning. It allows you to switch from your surface cleaner to the gun or wand assembly without running back and forth to your engine to shut it down and release the pressure in the hose. When you maneuver about cleaning with a wand, it also helps to relieve fatigue..
  • 3/8” QUICK CONNECT - This is a professional pressure washer shut off ball valve kit that includes a ball valve, a 3/8″ quick coupler plug, a 3/8″ quick coupler socket and teflon tape. The set up comes unassembled but it gets assembled very easily. The ball valve fit is designed in a manner to persist high pressures..
  • PREMIUM MATERIAL ENSURES HIGH QUALITY - The shut-off ball valve is made of premium quality stainless steel, housing with stainless steel handle and insert. Great quality stainless steel brings durability and long rust free service life. It can attain maximum working pressure of 4500 PSI and maximum working temperature of 158 degree Fahrenheit..
  • EASY TO USE - The design pattern of this pressure washer shut-off ball valve is constructed in a way that it can sustain high pressure working and provide good leverage un....
Check Stock

lukar 3/8" High Pressure Washer Ball Valve Kit with Teflon Tapes for Power Washer Hose, 4500 PSI

  • ①【Superior 3/8 Ball Valve】: lukar 3/8" ball valve pressure washer is made of high quality stainless steel + copper, durable, leakproof, rustproof, high temperature and pressure resistant.
  • ②【High Pressure Ball Valve Specification】 : 3/8" high pressure ball valve kit. 3/8" quick connect plug, 3/8" male NPT thread.
  • 3/8" quick connect socket, 3/8" male NPT thread. Max working pressure: 4500 PSI, Max working temperature: 158 °F.
  • ③【Easy to Use】: The 3/8 high pressure washe ball valve kit is easy to turn on and turn off, and provides good leverage under high pressure. Easy to connect to surface cleaner ,pressure washer gun, nozzle, pump and high pressure hose.
  • ④【Leak Proof】: lukar high pressure ball valve kit comes with 2 x teflon tapes. Teflon tape is used to wrap around the thread to effectively prevent water leakage.
  • ⑤【Package Includes】: 1 x high pressure washer ball valve.
  • 2 x Teflon Tapes, 2 x thread protection covers(Shown in the first image in listing).
Check Stock

DERNORD 1PC Type Stainless Steel Ball Valve 0.5 NPT Standard Port for Water Oil and Gas

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinly insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need....
Check Stock